Please post a pic of your interior if you have one

[dgie]

I posted this over on the sandbar also, I am trying to prepare to get the interior redone in my boat and am looking for ideas. please post a picture of your interior. My boat is a jet boat, but I am sure they can work any design in....Thanks

[Jeanyus]

Nothing fancy.
http://www.hotboatpics.com/pics/data/502/5859boat5.jpg

[bulldogdad]

i'm getting mine done soon also,but besides pics how about prices.one quote i got for interior and cover was $5500!

[MarKist]

here's mine at a total of 700.00 nothing fancy :idea:
MarKisthttp://www.***boat.com/image_center/data/500/1164IM000253-med.JPG

[PimpJuice]

I Work At A Custom Boat Interior Place Called Allens Upholstry In Martinez C.a.we Do Custom Work At A Good Price............

[Sleek-Jet]

here's mine at a total of 700.00 nothing fancy :idea:
MarKisthttp://www.***boat.com/image_center/data/500/1164IM000253-med.JPG
Very clean, was that done from scratch or did you recover the seats you have??

[Bryan Rose]

http://www.***boat.com/image_center/data/500/766Dsc00957-med.jpg
to this...http://www.***boat.com/image_center/data/500/766DSC01755-med.JPG
Not the best but very cost effective......
Bryan

[XClutchboy725]

Original Southwind design, but with a little Essex touch....
http://www.***boat.com/image_center/data/500/310Dads_Boat_jpeg.jpg

[XClutchboy725]

http://www.***boat.com/image_center/data/500/766Dsc00957-med.jpg
to this...http://www.***boat.com/image_center/data/500/766DSC01755-med.JPG
Not the best but very cost effective......
Bryan
Brian, We run the same scoop. Do you have a flame arrestor? I just fabbed up something with filter material and some screen. But If I get pulled over, I don't think it'll fly with the po po.

[Brooski]

Original Southwind design, but with a little Essex touch....
http://www.***boat.com/image_center/data/500/310Dads_Boat_jpeg.jpg
Mine is the same. Thanks, you just saved me a pic posting. :D

[tahitijet]

Here is mine. I built the wood frames from scratch I had just a little over 100-150 in material with sealer, cup holders, wood, screws, glue etc. and it cost me 600 to get them covered. I tried to kinda copy hbjet and cyclones interiors. One bit of advice Cyclone gave me a long time back was to have and angle put in the back of your seats. I did that and let me tell you the front seats are more comfortable then my bed.
http://www.hotboatpics.com/pics/data/500/709P8120087-med.JPG

[Bryan Rose]

Brian, We run the same scoop. Do you have a flame arrestor? I just fabbed up something with filter material and some screen. But If I get pulled over, I don't think it'll fly with the po po.
No , no flame arrestor in there.... should be, but have not got around to it yet... When I figure it out I will let you know, or if you come up with something good let me know.
Bryan

[78Southwind]

Here you go. The seats were done in 1995 and are a copy of the originals except for the stripes. Back then it cost me $500 to recover them. I think if I were to recover them now I would use white for the base and maybe two colors for the stripes (tahitijet). I really like the look of the forward seating (xclutchboy) compared to my coctail seating. However, I can fit an ice chest between my back seats I don't know if one would fit in the forward seating. If your out there xclutchboy can you fit an ice chest between the front an back seat. :idea: http://www.***boat.com/image_center/data/500/1676Southwind_Interior.JPG

[FHI-prez]

Here are some pics of my interior, again nothing special but works with the boat nicely. ;)

[Bense468]

http://www.***boat.com/image_center/data/500/1008DSCN0157-med.JPG

[wiskvp]

Nothing fancy here ;) I had a Tech. College do mine for one of their projects :cool: All it cost me was for Materials----(about $400.00)
http://www.hotboatpics.com/pics/data/500/5165Boat_interior-med.JPG

[79miller]

I put these on the sandbar thread also....
http://www.***boat.com/image_center/data/520/1850interior01.jpg
http://www.***boat.com/image_center/data/520/1850interior02.jpg
http://www.***boat.com/image_center/data/520/1850interior03.jpg
http://www.***boat.com/image_center/data/520/1850interior04.jpg
http://www.***boat.com/image_center/data/520/1850interior05.jpg
http://www.***boat.com/image_center/data/520/1850interior06.jpg
http://www.***boat.com/image_center/data/520/1850interior07.jpg
http://www.***boat.com/image_center/data/520/1850interior08.jpg
http://www.***boat.com/image_center/data/520/1850interior09.jpg

[XClutchboy725]

Here you go. The seats were done in 1995 and are a copy of the originals except for the stripes. Back then it cost me $500 to recover them. I think if I were to recover them now I would use white for the base and maybe two colors for the stripes (tahitijet). I really like the look of the forward seating (xclutchboy) compared to my coctail seating. However, I can fit an ice chest between my back seats I don't know if one would fit in the forward seating. If your out there xclutchboy can you fit an ice chest between the front an back seat. :idea: http://www.***boat.com/image_center/data/500/1676Southwind_Interior.JPG
Only a really small one. That is a problem with my interior. I have a hard time finding coolers that are large enough to support my habit and fit in the boat!

[Brooski]

Ditto on that. Tall and deep is the way to go.

[dgie]

Thanks yall for posting them, I am also looking at redoing the seating arangement in mine and this gives me some ideas, My boat is an 18 footer, so I am a little limited. Any one who has not posted yet, please do so when you get some pics. Thanks again everyone.

[badrat]

built all new seats, and interior 1700$ a little steep I think ???? Bill

[Ol Yeller]

I think less is more....$485
http://www.savepic.com/freepicturehosting/is.php?i=233977&fn=DCP_0007.jpg
http://www.savepic.com/freepicturehosting/is.php?i=233975&fn=DCP_0016.jpg

[dgie]

Badrat what kind of car is that in the background? 3 window coupe or? any more pics of it, it looks good...
OlYeller do you have problems with your bug catcher vanes not opening all the way? I took mine out, I was feeling I was starving the engine for air..

[KARNAC]

"73" Southwind Interior As Purchased In 2003. The Seats May Have Been Rebuilt About Ten Years Ago.

[badrat]

[QUOTE=dgie]Badrat what kind of car is that in the background? 3 window coupe or? any more pics of it, it looks good...
dgie! the car in the back ground is a 33 rats glass coupe[ford ] blown 468 BBC 400 turbo , winters quick change rear, its been a3 year project, and its almost finished, need to install the grill and radiator,
the other unfinished car on the right of the boat is a 48 Anglia Thames panel, [english ford] its waiting for a blown BBC also,
I think I can find a few pictures of the coupe, BILL

[Challenged Pimp]

As tempting as it may be, don't go stealing my designs here. I came up with this layout myself and is a 1 of a kind prototype. :D :D
11 dollar sheet of fiberboard, some left over speaker box carpet, back yard chairs, glue and screws... BAM, interior for under 50 bucks. LOL
It's temporary till I gather the bucks for building the actual interior, but hey it works for now!
http://www.***boat.com/image_center/data/500/1688Seats.bmp
This is the style I'm shooting for though, but with the rear deck more flat.
http://www.***boat.com/image_center/data/521/1688319Plowmans_and_playday_at_Granbury_428.jpg

[FoMoCo]

[QUOTE=Challenged Pimp]As tempting as it may be, don't go stealing my designs here. I came up with this layout myself and is a 1 of a kind prototype. :D :D
11 dollar sheet of fiberboard, some left over speaker box carpet, back yard chairs, glue and screws... BAM, interior for under 50 bucks. LOL
It's temporary till I gather the bucks for building the actual interior, but hey it works for now!
http://www.***boat.com/image_center/data/500/1688Seats.bmp
I would have sprung for at least colored lawn chairs!!! :D

[Ol Yeller]

OlYeller do you have problems with your bug catcher vanes not opening all the way? I took mine out, I was feeling I was starving the engine for air...
No problem here. They open 45 degrees our better. Enough to flow 850CFMs anyway....................

[dgie]

Challenged pimp if thats what your shooting for you got a long way to go. And yes, I am stealing your design :D For real, tell me you don't go on the water like that...please tell me...please :sqeyes:I am sorry I am laughing so bad I had to ask one more question. When you take off, do you and the pasenger tip over, if so who is driving the boat? :D
Never a dull moment on ***boats....

[Challenged Pimp]

Challenged pimp if thats what your shooting for you got a long way to go. And yes, I am stealing your design :D For real, tell me you don't go on the water like that...please tell me...please :sqeyes:I am sorry I am laughing so bad I had to ask one more question. When you take off, do you and the pasenger tip over, if so who is driving the boat? :D
Never a dull moment on ***boats....
Haha, hater's.... Ya'll just a bunch of hater's. :hammerhea :D
Like I said, this was carefully designed here! Those badboy chairs would be screwed to the floor, so no tipsy turn over stuff goin on here. Just grade A flex coushin seats. lol :messedup:
For real though, my original intent was to get this boat running and see if it rides good and drives good before I go dumping tons of money into it. Unfortunately all of my friends boats are broke dick right now, so we've just been using this clunker for now. I'll be rippin all the crap out as soon as the season comes to an end. But hey, it's kinda fun cause it gets a laugh out of everyone! Especially the ruffle cushions :eek:

[likeFATHERlikeSON3]

original '87
http://www.***boat.com/image_center/data/521/230top2-med.jpg http://www.***boat.com/image_center/data/521/230close_side_view-med.jpg

[dgie]

Especially the ruffle cushions :eek:
Since you brought it up those are pretty funny....Now I am laughing again :D

[Challenged Pimp]

Since you brought it up those are pretty funny....Now I am laughing again :D
:D :D See it works on everyone. lol

[BrendellaJet]

Heres what mine used to look like. http://www.***boat.com/image_center/data/500/212100_0053-med.JPG
It should look something like this in a few months.
http://www.***boat.com/image_center/data/520/212Seat-med.jpg

[bigriverdog]

Hey Brendella "THATS MY BOAT INTERIOR" you rip off. I was just going to put a pick up of it, and there it is. If you want to know the shop that did that, PM me.

[dgie]

Brendella that's a big difference and will look good. It looks like at lot of people are going towards a newer look. That's the direction I am headed with on my boat. I am a little limited for seating. on mine the back seat is almost useless since my boat is an 18 footer. I could only wish I had the room 79 miller has, I will come up with something, maybe a double decker jet boat :eek:. I wonder if I would make ***boats magazine with that :D Anyone else please post when get them. Thanks yall keep them coming.

[miller19j]

That is my dream Miller! I am in love with your boat!!!!!
I put these on the sandbar thread also....
http://www.***boat.com/image_center/data/520/1850interior01.jpg
http://www.***boat.com/image_center/data/520/1850interior02.jpg
http://www.***boat.com/image_center/data/520/1850interior03.jpg
http://www.***boat.com/image_center/data/520/1850interior04.jpg
http://www.***boat.com/image_center/data/520/1850interior05.jpg
http://www.***boat.com/image_center/data/520/1850interior06.jpg
http://www.***boat.com/image_center/data/520/1850interior07.jpg
http://www.***boat.com/image_center/data/520/1850interior08.jpg
http://www.***boat.com/image_center/data/520/1850interior09.jpg

[79miller]

That is my dream Miller! I am in love with your boat!!!!!
Thanks! I love it. Dumped way too much money bringing it back to life, but it's a great boat. You don't see too many of them out there.