2Sangers
08-23-2004, 03:36 PM
Just bought my first v drive (83 Sanger ski hydro) and am trying to get my jet boat motor installed in it and ready to run. I already changed the oil pan and timing chain cover but my neovane pump is a POS. I am running a small block chevy with a roller cam so setting end play is also a concern. The pump fittings are in the way of the blower belt too.
Can I run an electric water pump such as a CSI with a 10AN inlet? The boat has outboard steering with a 5/8" tube welded to the rudder for the pickup. I need to feed the engine and the intercooler with this pickup if my small block can make the boat blow the tail. Thanks
Can I run an electric water pump such as a CSI with a 10AN inlet? The boat has outboard steering with a 5/8" tube welded to the rudder for the pickup. I need to feed the engine and the intercooler with this pickup if my small block can make the boat blow the tail. Thanks