spam o rama lots of stuff

[hack job]

ok here gose i got some stuff i want to clean out and every one else is doing so i mihgt as well move mine as well ;)
these are a set ov ford motor sports valve covers in ok sahape they will need to be cleaned up and a quick polish thrown on then and they will kick ass ( they fit 429,460 fords) $50 and shipping and there yours
http://www.hotboatpics.com/pics/data/500/3583Dscn2985-med.jpg
http://www.hotboatpics.com/pics/data/500/3583baffle-med.jpg
now i have a hi torque stater for a bbf ford its in working shape it kicks out and spins. thats all i know about it.
http://www.hotboatpics.com/pics/data/500/3583bbf_hi_torque-med.jpg
http://www.hotboatpics.com/pics/data/500/3583bbf_hi_t2-med.jpg
$50 takes it as well
next up is a couple of rudders for berekely pumps on is polished ( or used to be) and is short and the other is white and long. $ 25 each
http://www.hotboatpics.com/pics/data/500/3583rudderp-med.jpg
http://www.hotboatpics.com/pics/data/500/3583rudderw-med.jpg

[wsuwrhr]

and the other is white and long. $ 25 each
I would ask for alot more for mine. But that is just me.
Brian

[hack job]

next up is a fram reusable fuel filter
$20
http://www.hotboatpics.com/pics/data/500/3583fuel_filter-med.jpg
ok i got a couple of sets of vents that we poped out for some folks and they never came through so they are up for $10 each they are ready for polish or powder coating .
http://www.hotboatpics.com/pics/data/500/3583rounded_vent-med.jpg
http://www.hotboatpics.com/pics/data/500/3583angled_vent-med.jpg
while digging through some old stuff i found this eldebrock air cleaner its in great shape .$15 bucks
http://www.hotboatpics.com/pics/data/500/3583edlebrock-med.jpg
and here is a bbc timing chain cover . in good shape except one of the holes on the bottom is striped out it would need a retap and or helicoil.
$25
http://www.hotboatpics.com/pics/data/500/3583Dscn2994-med.jpg

[GlastronGuy]

Tyson, what is the size on the vents?

[hack job]

ok here we have three gauges by hardin marine they are in good condition and they are $10 each they are fuel pressure , oil pressure , and boost
http://www.hotboatpics.com/pics/data/500/3583gauges-med.jpg
here is a scoop that i ran on my boat for half a season it was a cool scoop cause no one had it ( i still dont see too many people with it) $40
http://www.hotboatpics.com/pics/data/500/3583scoop1-med.jpg
http://www.hotboatpics.com/pics/data/500/3583scoop2-med.jpg
here is a nozel mount and cable arm for berkely pumps both are in good shape the nozel mount is $10 bucks and will need a little cean up the cable mount is $15.
http://www.hotboatpics.com/pics/data/500/3583jg_nozel_mount-med.jpg
http://www.hotboatpics.com/pics/data/500/3583Dscn2993-med.jpg
lnext up is a set of big block ford heads casting # d3ve a2a they are in great shape they have about 10 hours on them they inculed valves, springs and cups and the heads ( they will need to be put back together )i had them taken apart when i bought my heads for my motor and tested the heads and springs. these heads were done by clay smith cams and have there river racer port job on them .they are $400
http://www.hotboatpics.com/pics/data/500/3583DSC00515-med.JPG
http://www.hotboatpics.com/pics/data/500/3583port1.gif
and i also have the clay smtih cam 310 for a bbf for sale also its $50 bucks

[hack job]

round vents sold
as well as timing chain cover;)

[GlastronGuy]

round vents sold
as well as timing chain cover;)
:messedup:

[78Southwind]

Is that scoop a Hatch Scoop? What is it set up for duals or a single carb? Looks like duals.

[GlastronGuy]

Is that scoop a Hatch Scoop? What is it set up for duals or a single carb? Looks like duals.
Good luck getting an answer out of him.

[bigerich]

I might be interested in the Cable mount for the Berkeley pump.

[slotracer]

what kind of gauges are they? mech. or electric? thanks
pat(slotracer) :D

[hack job]

glastron guy i still have the angled ones, sorry it took so long it is a holiday weekend :supp:
any how the scoop was run on my tunnel ram with no hatch and it was duel carbs.
the gauges are electric except for boost is mech.
thanks for waiting :confused:

[hack job]

cable mount sold;)

[hack job]

nozel mount gone too;)

[dmontzsta]

Just how bad are those valve covers? can they be polished out like new?

[Jim Brock]

I'll take the 2 rudders, bring them to the swapmeet on sunday, or give me a call, Jim 818-890-1867

[pops1]

I'll take the 2 rudders, bring them to the swapmeet on sunday, or give me a call, Jim 818-890-1867
Jiim, call me going to polish shop- do you want 1 or 2 intakes. Dave

[hack job]

I'll take the 2 rudders, bring them to the swapmeet on sunday, or give me a call, Jim 818-890-1867
jim i might only have one left ( the polished one) but its yours ill bring it down there to you;) ill see you on sunday

[hack job]

Just how bad are those valve covers? can they be polished out like new?
the valve covers would need a good buffing and they would clena up i have like three others that have asked about them before you but if they flake they are yours;)

[1978 Rogers]

Here are some pictures of my situation. I want to make sure your starter will fit.

[hack job]

it will fit no prob.

[1978 Rogers]

I'll take the starter. You want to PM me on how and where to send payment, etc.
Chris.