PDA

View Full Version : Backfire after runnin' hard



Liberator TJ1984
09-07-2004, 06:28 AM
After running , motor sometimes backfires once when I get back into the gas and just crack the carbs to putt around ..what gives here ??? :idea:
8/71 2-1050 Dominators 30* locked out timing BBC454 2Mallory 250 pumps 8# fuel psi @ Log & carbs idles@ 900rpm
any input would be appreciated , do you guys need more info !
Thanks, Gopherrr

Fiat48
09-07-2004, 10:54 AM
Backfire through the exhaust or the intake?

Liberator TJ1984
09-07-2004, 11:06 AM
Fiat ,sounds like intake....

Fiat48
09-07-2004, 12:15 PM
Check your shooters (and the little check valves below them) and also your linkage to the accelerator pumps. Sounds like not enough pump shot.

Liberator TJ1984
09-07-2004, 12:26 PM
Thanks Fiat !!
will check this out, I have been having some trouble with my linkage adj. :wink: I was only worried about getting WOT not part throttle :hammer2:

Blown 472
09-07-2004, 04:51 PM
I had the same thing, adjusted the slop out of the pump arms and it fixxed it. :rollside:

Fiat48
09-07-2004, 05:04 PM
Yeah..that is what I meant by checking the linkage. Slop in the pump arms. My carb lingo is lacking.

058
09-07-2004, 05:17 PM
Yeah..that is what I meant by checking the linkage. Slop in the pump arms. My carb lingo is lacking.Bob...you've been around injection too long. :D

Blown 472
09-07-2004, 05:33 PM
Bob...you've been around injection too long. :D
Now that is funny.

SVO 540
09-16-2004, 03:52 PM
What causes a blower motor to backfire through the exhaust?