Looking for a Neovane Pump

[OneGuyAviation]

I`m in the process of restoring an old 1963 Howard flat and I would like to find one of the old school Neovane cam driven water pumps for it.
I know they dont make them any more and I thought that maybe someone has one laying around collecting dust that they might want to part with.
I can put a Magnaflow on it but I would like to keep the nostaligc look for the era of the boat.
Any Help ???

[Squirtin Thunder]

CP and Rex Marine

[OneGuyAviation]

CP and Rex Marine
CP and Rex only sell Magnaflow pumps now.
I would like to find an old Neovane pump.
Thanks anyway for the feedback

[Squirtin Thunder]

Check Vic hubards in Hayward.
Your kidding they may want to address that. Or you could get a Berkley.
Jim

[OneGuyAviation]

Check Vic hubards in Hayward
Jim
Vic Hubards does not have then either.
The people that made Neovane pumps no longer makes them, But you can still buy rebuild kits for them.

[DaveA]

Dear OneGuyAviation,
Keep looking on Ebay- one shows up there from time to time. Search Ebay Motors using Neovane...perhaps you know the drill already.
Interesting screen name....
DaveA

[OneGuyAviation]

DaveA
Tried that also with no luck as of yet.

[voodooCanoe]

I've got one, but it needs to be rebuilt. You can still get the complete rebuild
kits.

[Squirtin Thunder]

Sorry I had no idea that they quit making them, thats what happens when you spend too much time in NASCAR country.
At least you can buy the rebuild kits.
Jim

[Moneypitt]

What part of the country are you in? You may get more responses from people local to your area, myself included. I've got serveral, a couple of different types, and some parts and pieces.........MP

[Squirtin Thunder]

Money,
Out where DaveA lives there is only one shop that might even be close to a performance boat shop and all it manly is is a dealer, Thunder Marine. Thats NASCAR land. If it doesn't have Goodyears on it they have no idea.
Jim

[Rexone]

Neovanes haven't been made for roughly 20 years. But it's possible I might have one laying around. I will check when I get in the shop and let you know if I do. :) And yes impeller kits we do have.

[spectras only]

Have one in excellent condition with new impeller. Let Mike dig his up first. :boxingguy :D

[Rexone]

Have one in excellent condition with new impeller. Let Mike dig his up first. :boxingguy :D
Go ahead SO cause I'm not sure I have one or where it is if I do... no worries..
Also on neovane pumps there were 3 basic models and variations of those..
The V505 had 1/2" NPT threads (or was available with integral inlet/outlet, one made by neovane, another made by GW, and another by Nicson, and I think Hallcraft had one also).
The V755 had 3/4 NPT, same as above on manifold availability.
Both the above take the same impeller and have the cover retained by 8 or 9 screws around the perimeter with a gasket.
Then there was the larger V105 which had 1" NPT or an integral manifold made by Neovane. Different design cover on these and larger impeller. Cover retained by 2 pins with an oring seal (which usually broke so we replaced them with threaded studs we used to make).
Just some useless trivial history... :hammerhea

[OneGuyAviation]

What part of the country are you in? You may get more responses from people local to your area, myself included. I've got serveral, a couple of different types, and some parts and pieces.........MP
Located in Nor Calif.
Can you post pictures and $$$$ you are asking

[OneGuyAviation]

Have one in excellent condition with new impeller. Let Mike dig his up first. :boxingguy :D
$$$$$ and Pictures ?

[Thunderbutt]

I have two. The small one is on the boat 1/2 inch, I think the other one is 3/4 inch

[Moneypitt]

I've got one of the old mothers with the angled retaining screws,(early 60s) and 2 of the multiple retaining bolt types. Also one multiple retaining bolt unit with all new insides and AN fittings(spare for my hydro) but PM me, maybe we can come up with a deal we all will like. (That means I have no fu%*#*% idea what it's worth)...................MP....Or Call 805 498 6531........Ray

[BLOWNDEAVER]

I Have A Extra Neovane Pump #v-105-3 Has On Inlet And Two Outs,2 Bolt Design, Top Is Polished,chrome Impellor Coverstill Has Rotation Diagram Sticker On It ,needs Impellor Make Offer 405-802-4317 Thanks Thomas ;)

[old rigger]

I`m in the process of restoring an old 1963 Howard flat and I would like to find one of the old school Neovane cam driven water pumps for it...........
Any Help ???
Oneguy,
I was at the high performance swap meet today and talked to Jim Brock about you looking for a pump. He had 3 maybe 4 of them there at his spot. I didn't ask a price, but here's his number,
Cyclone Marine
1 818 890 1867

[spectras only]

$$$$$ and Pictures ? It's a V755-3 model. Sorry no picture. It's sitting on the shelf next to a Hallcraft model.Take your pick.Dave is asking $388 CDN . Take your time at the swap meets to find out how much they go for .Then call him at california marine 604-278 1880 and dicker :rollside: .

[stix818]

I know www.dragboatcity.com has parts for neovanes (all internal components) so he may be able to hook you up.

[DUCKY]

I've got a brass Jabsco cam drive pump out in the garage. same bolt pattern as a neovane. Would look very trick and old school if polished out. I'm thinking $40.

[BLOWNDEAVER]

I will take 80.00 for mine,plus shipping :messedup:

[OneGuyAviation]

Thanks for all the replies on the pump.
Got one coming from Jr Bentpipes here on the boards. :D

[gonefishing2000]

I have a Neovane cam driven water pump, model number V755-X with cam adapter and Nicson diverter with 1/2 “ inlet and duel 3/8” outputs ,
Less than 10 hrs of use on them, in very good condition
$50 plus shiping
Bob @ rwingard@riskmc.com

[sangervdrive]

I would really like to get the 505 model, but I am interested as well. I've been searching ebay but they go pretty high. As far as local, hardly anyone around here even knows what a jet boat is much less a v-drive. :(

[Blown to the Bone]

I have a v-505 with a new impeller, will trade for magna flow if your interested.....

[Moneypitt]

I would really like to get the 505 model, but I am interested as well. I've been searching ebay but they go pretty high. As far as local, hardly anyone around here even knows what a jet boat is much less a v-drive. :(
Check your PMs