Need Exhaust!!!

[TIMINATOR]

I'm looking for a performance exhaust system for 2 of my boats. For the SBC and BBC I need something like EMI Thunder,Dana, or lightnings or CMIs. These will be for sterndrive application. Needing repairs is OK too. CALL TIMM 623-877-8553 or PM me. Thanks!

[vee robb]

Timm,
I have a set of Imco Power Flows for a BBC. They are the earlier style with round water transfer holes at the flanges (I had a set of bungs welded in so that the the flange holes could be plugged, and transfer hoses could be used). If you or anyone else is interested $300.00 for the pair + shipping. My phone number: 541-660-4271
Thanks,
Robb

[Brian Ray]

Timm,
I have a set of Imco Power Flows for a BBC. They are the earlier style with round water transfer holes at the flanges (I had a set of bungs welded in so that the the flange holes could be plugged, and transfer hoses could be used). If you or anyone else is interested $300.00 for the pair + shipping. My phone number: 541-660-4271
Thanks,
Robb
Do you have pictures??

[vee robb]

Brian Ray,
No, but I will get some pics of them this weekend. They are at my friends machine shop, so check back Sunday night and I should have some pics. I have a set of Gil stainless riser that I will take pictures of also.
Thanks,
Robb

[TIMINATOR]

What about me???????? Call me! Timm 623-877-8553

[vee robb]

Heres some pics of the Imco Power Flow exhaust manifolds. The finish on them was starting to flake off so I cleaned one of them up (I was going to have a friend of mine up here powder coat them to match my boat). One of them had a pin hole leak where the flow divider had worked lose and wore a hole into the water jacket. I had it repaired (pressure test good now) and also had pipe bungs welded on so that the flange water ports could be blocked off (eliminates the possibilty of a leak at the flange). I ended up not using them because my buddy is a Lightning Header dealer now. They are in good condition (no heavy corrosion), I have more into them than I am asking for them.
Price: $300.00 (plus actual shipping cost)
Included with the manfolds: Two sets (total of four) of brand new flange gaskets.
Location: So. Oregon
Phone: 541-660-4271 (Robb)
Timm,
If you are interested give me a call, you've got first shot on them. I would call you, but I'm not much of a soliciter.
Thanks,
Robb

[SPECTRABRENT]

Timinator,
Jim Brock has a set of DRake's (just like IMCO's). JIms # is 818-890-1867.
Brent

[rpm2]

Here are some new CMI Sport Tubes with Bravo downturn for $3795 with tailpipes. These will make serious HP.
Rod

[98 Vector 21]

$3795.00 Jeessus, Dana's new $1900.00? And trust worthy!

[VelocityDriver]

There are some on ebay.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=31285&item=4507295945&rd=1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=31285&item=4506503458&rd=1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=31285&item=4506002086&rd=1

[TIMINATOR]

Thanks all, I will call asap! TIMM

[sleek willy]

TIMINATOR,
I still have a set of lightnings for a BBC. Weld up a 1/8" hole and you're off and running, I'll make you a good deal if you're interested.
-Sleek Willy

[rpm2]

Dana's are a nice piece if you are looking for stock replacement or to put on a supercharged engine, but they are no match for a true header when it comes to making HP.