looking for parts thread

[slotracer]

i will be the first one. i am looking for a center blocker grate for a jg pump.
thanks
pat(slotracer) :hammer2:

[roostwear]

I need this gauge. Stewart Warner 2 1/16" 0-100psi mechanical oil presure gauge with backlighting. I need an exact replacement. Anyone have one tucked away?
http://www.***boat.com/image_center/data/520/896swop.jpg

[kindsangerflats]

I might have one. I had a small chrome "mini" dash that came with several SW gauges like that on an FE 427 flatbottom v-drive. I'll check. I don't have a need for any of them.

[Squirtin Thunder]

Mike,
I replaced all mine. I got them at NAPA. Had to dig a bit in the book but found them.
Jim

[Jet City]

Barnett Performance (800-533-1320) lists two SW gauges that look like what your after.
Mech 5-100psi STE 82323 $39.98
Mech HD 5-100psi STE 284D $43.98

[kindsangerflats]

I've got one. Came out of my Sanger, it's yours if you want it.

[1HOTGMCJET]

Here you go:
http://www.***boat.com/forums/attachment.php?attachmentid=7495

[Cas]

Pat,
George at ARS Marine has a couple new ones that the powder coat didn't come out right on. He's selling them for $125.00 each, brand new.

[victorfb]

not sure what a center blocker grate is. can you explain?
Roost(were). i too may have that guage at home in the shop. had a few new SW's and some used. ill check tomorrow when i get home.

[Mighty Thor]

I am looking for an edelbrock 750 marine carb. might also consider a carter if such a beast exists.

[Nucking futs]

I have a quadrapuke 750 marine i will let go. Was used only once.......

[slotracer]

a center blocker is a grate with the center blocked out so it helps create lift in the back of the hull. cas the ones ars had were not center blockers the ones i saw. send me some pictures of the one you may have dragboat. thanks
pat(slotracer) :hammer2:

[ARS Marine inc.east]

Slot Your Correct .
There not 100% center Blocker
They are semi v blocker and test's have shown it does create tail lift.
That can be milled to accmodate for holeshot improvments.

[Nucking futs]

hows this for a blocker?
http://www.***boat.com/forums/attachment.php?attachmentid=7559&stc=1 http://www.***boat.com/forums/attachment.php?attachmentid=7558&stc=1 http://www.***boat.com/forums/attachment.php?attachmentid=7557&stc=1

[Squirtin Thunder]

I am looking for an edelbrock 750 marine carb. might also consider a carter if such a beast exists.
Yes they do. What is real cool Edlebrock has the J tubes avalable on special request. So you can convert a street carb to marine.
Jim

[slotracer]

nucking futs what the hell is that.
pat(slotracer) :hammer2:

[ARS Marine inc.east]

Maybe For My jetski!

[Nucking futs]

It goes in this :cool:
http://www.***boat.com/forums/attachment.php?attachmentid=7562&stc=1 http://www.***boat.com/forums/attachment.php?attachmentid=7561&stc=1
http://www.***boat.com/forums/attachment.php?attachmentid=7560&stc=1

[FOURQ]

Maybe For My jetski!
wow i guess you dont work on many race pumps if you dont know what that is........
4Q

[ARS Marine inc.east]

--------OOKK------- :idea:

[Squirtin Thunder]

That is one of those '80s blockers !!!
Jim

[ARS Marine inc.east]

wow i guess you dont work on many race pumps if you dont know what that is........
4Q
I don't Trust Cast Aluminum for any type of H.P. Loader , But for My Jetski!

[Nucking futs]

That is a stock loader out of a "R" pump.
You want to see a real blocker? OK here ya go...........It came out of a world record holding SWTD Any guesses which one?
http://www.***boat.com/forums/attachment.php?attachmentid=7563&stc=1
http://www.***boat.com/forums/attachment.php?attachmentid=7565&stc=1

[FOURQ]

I DO I DO !!!!! PICK ME PICK ME!!!! lol
well i hear what your sayin about the aluminum blocker but cmon you should have known what it was at first sight if you do any high performance pump work......

[Nucking futs]

I don't Trust Cast Aluminum for any type of H.P. Loader , But for My Jetski!
that one is billet.And no i dont run that one.Only for mock up and stuff.It is too short to make it work.It has been cut way down.I would not let anyone run that......Tim

[ONAROLL]

There is about to be an "R" Intake, Loader, Rideplate Shoe and Bowl cradle on Ebay..........cause its in my way..........Vic

[moneysucker]

That looks billett to me but pix don't tell too much there. Pat, Psych squid should have one. I can probably bring it up if he wants to get rid of it. My spare is a full open center. I would try one of those snow shovels if it would fit my pump. I am in agreement about using cast aluminum or stainless. But that I believe is billet.

[FOURQ]

Cy you hit it on the head......
4Q

[slotracer]

moneysucker who is psych squid? i may be making a run down to chino this weekend to see todd about some work on my boat that i bought a couple of weeks ago. i will know sat. am.
pat(slotracer) :hammer2:

[ARS Marine inc.east]

To All:
My Bad , At first glance I took that Loader to be Cast Aluminum,
But as I was shutting down the Computer I Realized to myself
Anodizied Cast aluminum turns out Very Dark and crappy
Unlike the loader shown in the Pic's
So I will agree that it is of Billet Aluminum
My fault for being a slow typer.

[FOURQ]

:)

[moneysucker]

Psycho Squid, aka The Calimari Kid, the boater formerly known as Petrofied. He lost the name when he sold the boat. He is in San Diego. If you are testing, soon, I will let you borrow mine. I am back and forth every week or so and it will fit in my suit case.

[moneysucker]

Futz, Whats up? you are giving up all the secrets. Double drilled, Stuffer, Ported bowl, Droop Race nozzle, Secret loaders. I don't want to win like this. JK

[Nucking futs]

Well shit,I did'nt think it would matter so much to you.All you will see is the pump when your boat is behind me all day............
There is not one secret shown there,All comon knowlage if you know what your looking at.Just a pump :D
Besides, I dont make enough power for that pump.Have to see what santa brings me.....
http://www.***boat.com/forums/attachment.php?attachmentid=7572&stc=1
Sorry for the highjack, Tim

[FOURQ]

here is a pic of one of the rods we are going to be useing...i picked um up cheap from a buddy thats going to nitro.....
http://www.***boat.com/forums/attachment.php?attachmentid=7574&stc=1

[Squirtin Thunder]

There is about to be an "R" Intake, Loader, Rideplate Shoe and Bowl cradle on Ebay..........cause its in my way..........Vic
Do you want me to come and get it out of your way ???
Be there in five !!
Jim

[MikeF]

Some one has to have one of these things buried under some old stuff???
Call Jack. He modified the one I bought from him to adapt to my Calgo steering. I'd post a pic but I'm using a friends computer to write this.

[mevale]

I need a pair of 750 cfm double pumper carbs (Holley or Demon) for my winter project.
Thanks
Joe

[FOURQ]

i have a tiller arm but i will have to see if its for sale....i need a GOOOD berk "A" impeller any one got one?

[Nucking futs]

i have a tiller arm but i will have to see if its for sale....i need a GOOOD berk "A" impeller any one got one?
Tiller arm is not for sale.........

[moneysucker]

i have a tiller arm but i will have to see if its for sale....i need a GOOOD berk "A" impeller any one got one?
I have an aluminum one AA brand new condition. How bad do you want it?

[FOURQ]

how much ya want for it?

[moneysucker]

One MEELION DOLLARS! Or 1/2 of new. I can have it in the riverside area next week while I am at Glamis. We have a job in rialto. Close to Toms shop.

[moneysucker]

$125.00 is the going price. CP price is $249.95 It says 2A stamped on it. I will have Psycho Squid check it.

[moneysucker]

I have a brand new Harwood scoop in box. (box has been rained on) I drilled it for zeus fittings so I couldn't send it back after deciding to go injected.

[Squirtin Thunder]

I need a pair of 750 cfm double pumper carbs (Holley or Demon) for my winter project.
Thanks
Joe
Joey,
I bet you would like for yours to look like this;
Jim

[mach1alaska]

Is anyone out there wanting to switch from thru transom exhaust to headers??? I am planning to convert my jet to thru transom and am interested in trading my headers with water lines braided stainless hoses and bassett t valve for a thru transom set up.
they are bassett shorty some rust and bluing but still presentable.
Kevin
I forgot to mention they are for a BBC

[mevale]

Joey,
I bet you would like for yours to look like this;
Jim
Something like that.
Joe
:D

[Squirtin Thunder]

Something like that.
Joe
:D
Good !!!

[shaun]

I'm looking for a outside/waterproff cover for a 18+ foot jetboat, pm me

[Heatseeker]

I'm looking for a outside/waterproff cover for a 18+ foot jetboat, pm me
Kmart-$90.

[5th Horseman]

I need the following:
A Flywheel cover with top mount starter for BBC, converting from 3 point.
Also neeed a 1310 driveline for BBC to std jet spline.
Also an "A" bronze impeller
no junk please.
PM if you have anything
Thanks,
Paul
.

[victorfb]

ok mike. i found your guage. exactly like the one you posted. :D

[Nucking futs]

Thanks Vic for bringing this thread back.I found the guy that wanted to trade those headers. Awsome i lost his name..

[victorfb]

finders fee? :D

[Nucking futs]

Lets see if it happens first.I think he was going to call me uhm, a week ago... :rollside:

[Liberator TJ1984]

Looking for one of thesehttp://www.eddiemarine.com/cart/Pictures/107-30.jpg :notam: and driveline cover / BBC
Gopherrr

[roostwear]

ok mike. i found your guage. exactly like the one you posted. :D
Toni'll get her ride in the roadster :D She doesn't freak or anything during wheelstands does she?

[victorfb]

Toni'll get her ride in the roadster :D She doesn't freak or anything during wheelstands does she?
nope, but be warned, if you do that she'll want to drive that thing. :p