JET468
05-30-2001, 07:56 AM
I have a 96 commander 21LX with a dominator insert pump - I recently replaced the marine power gen 5, 454 (cooked by prior owner) with a built version of the same motor. I retained the stock wiring harness (marine power) and boat's orig. electrical system.
My problem is when I go to start the motor, the starter kicks in, spins the motor and will not disingage until the battery power is cut. I had the orig. starter rebuilt and the solonoid is new. The flywheel is orig and is not binding on the starter. I have chased the wiring and all seems in order as from the factory (this problem even occours when all the secondary wiring on the starter (minus the main power) is removed - there is a relay behind the carb on top of the in intake, but I didn't touch any of that wiring, all is factory -
- HELP - anyone out there have any ideas???? (short of ripping out all of commander's wiring and doing it "right"!!!
My problem is when I go to start the motor, the starter kicks in, spins the motor and will not disingage until the battery power is cut. I had the orig. starter rebuilt and the solonoid is new. The flywheel is orig and is not binding on the starter. I have chased the wiring and all seems in order as from the factory (this problem even occours when all the secondary wiring on the starter (minus the main power) is removed - there is a relay behind the carb on top of the in intake, but I didn't touch any of that wiring, all is factory -
- HELP - anyone out there have any ideas???? (short of ripping out all of commander's wiring and doing it "right"!!!