572 ci Motor For Sale

[P-Money]

Long story short: My dad was testing and tuning his hydro, hit a stump that was under the surface of the water, lost the steering, hit something else, got ejected from the boat. Went to the emergency room and was released that night with nothing but a broken arm, we thought. A week later he passes away very, very unexpectedly. Turns out he had a small tear in his heart that the doctors didnÂ’t catch, blood filled the sack around his heart and basically choked it off. That was back in late August. That said, mom still has to eat, so the motor outta the hydro is up for sale. HereÂ’s the info I have:
572 c.i.
World Products 4.500 inch tall block
Lunati Pro Crank 4.500 inch stroke
Dyers Blower Manifold
Herbert CNC “Pro” H-Beam Roads with ARP 7/16 bolts
JE Reverse Dome Pistons
Lunati Roller Cam .737/.715
110 Lobe Separation
283 In. / 293 Ex. @ .050
World Products Heads
2.250 Intake, 1.88 Exhaust
7:1 Compression
Would like to get $8000, but obviously weÂ’re open to offers. Questions should be directed to Gary Watson at 608-879-9512. The motor has very little time on it and was never run hard. I would love to keep it, but given the circumstances itÂ’s got to go.
Also have a DyerÂ’s 6-71 supercharger for sale. Fully polished, with four 8 mm pulleys and 2 belts. No carb plate or manifold (unless the motor above sells without the manifold). $1400 or best offer.

[superdave013]

Pat, so sorry to hear about your dad. :(

[Heatseeker]

P, sorry for your loss. That totally sucks.
I'd love to have that mill, but I ain't got the scratch.

[P-Money]

bumpity bump bump

[Squirtin Thunder]

Long story short: My dad was testing and tuning his hydro, hit a stump that was under the surface of the water, lost the steering, hit something else, got ejected from the boat. Went to the emergency room and was released that night with nothing but a broken arm, we thought. A week later he passes away very, very unexpectedly. Turns out he had a small tear in his heart that the doctors didn’t catch, blood filled the sack around his heart and basically choked it off. That was back in late August. That said, mom still has to eat, so the motor outta the hydro is up for sale. Here’s the info I have:
572 c.i.
World Products 4.500 inch tall block
Lunati Pro Crank 4.500 inch stroke
Dyers Blower Manifold
Herbert CNC “Pro� H-Beam Roads with ARP 7/16 bolts
JE Reverse Dome Pistons
Lunati Roller Cam .737/.715
110 Lobe Separation
283 In. / 293 Ex. @ .050
World Products Heads
2.250 Intake, 1.88 Exhaust
7:1 Compression
Would like to get $8000, but obviously we’re open to offers. Questions should be directed to Gary Watson at 608-879-9512. The motor has very little time on it and was never run hard. I would love to keep it, but given the circumstances it’s got to go.
Also have a Dyer’s 6-71 supercharger for sale. Fully polished, with four 8 mm pulleys and 2 belts. No carb plate or manifold (unless the motor above sells without the manifold). $1400 or best offer.
Is this a Ford or a chevy ???

[P-Money]

Based on a Chevy Block. I forgot to mention it also comes with the starter.

[Huffer]

Well tax time is getting close once again sure would like to have it myself.
Keep me informed,whats the best you'll do?704-458-6544 HUFFER

[P-Money]

Make an offer, thats the best I can tell ya.

[BrendellaJet]

got any pics of the motor and the blower?

[SPECTRABRENT]

P-Money,
Would you consider selling motor with no heads or manifold just the short block?
Brent

[DEL51]

P-money, Call Todd Goodwin (920) 685-3000 and tell him your situation. He can check the motor out and give you a deal for least what parts are involved. He could dyno it and has more contacts that may be interested.Did you call your engine builder? someone may be waiting for an engine like yours.Todd is an outstanding person and can help.I am Sure you can retrieve 8k if the stuff is good. Nobody can build a 572 blower motor for 8 grand. Hang tight!, Tell him Chris from Green Bay sent you.God Bless, Chris.

[P-Money]

Here's the motor, stuff from manifold up, as well as teh zoomies are not included:
http://www.***boat.com/image_center/data/524/540Motor-med.jpg
Here's a lic of the 6-71:
http://www.***boat.com/image_center/data/500/540Regulators-med.JPG
http://www.***boat.com/image_center/data/500/540Back_Edited-med.JPG
The motor may end up in a 21' jet I'm buying soon. If it does, teh 496 outta my v-drive will go on the market in its place. Clock is ticking!

[MarKist]

I'm not looking for a v-drive but I have a bud, that has been talking shit so I wanna throw it in his face!? here is one now go get it~ :D :D
Markist

[DEL51]

Hang in there. Did you call Todd?

[P-Money]

DEL 51:
I haven't made any calls yet, but I will in the near future if this thing doesn't move or it doesn't go in this jetboat. Thanks for the number.

[Mr.Havasu]

Really sorry to hear about your dad. Where are you located? We are in Havasu, I might be very interested. Thinking of doing a project boat and this might be a good start.

[P-Money]

Beloit WI

[Mr.Havasu]

Might have to do a road trip

[P-Money]

still for sale

[HPjunkie]

P-Money PM me about your price. Greg 509-0856