PDA

View Full Version : exhaust questions



Toomstone
12-02-2004, 10:50 PM
im probably getting a 50 series delta flow in the next two weeks for my f150 supercrew. does anyone know whats the advantage of getting all new piping? And whats the advantage of getting a 3 inch pipe instead of the stock 2 and a half?
Thanks
Toomstone :crossx:

dc96819
12-02-2004, 11:19 PM
Mandrel bent tubing,no creases in pipe and 3 inch tube less back pressure.
3 inch tubing might be the best,to big could also hurt performance.Mandrel
you might not even feel the difference.

Toomstone
12-03-2004, 04:16 PM
would there be difference in sound between the 3 inch and 2 and a half? sound is my first priority. so if they sound the same ill save the money and just get the muffler put on. but if the 3 inch is deeper or more throaty then ill get the new piping too.

voodoomedman
12-03-2004, 11:54 PM
Go 3 inch from the cat back and you won't be dissapointed.

Eliminator 4 Life
12-04-2004, 07:44 AM
would there be difference in sound between the 3 inch and 2 and a half? sound is my first priority. so if they sound the same ill save the money and just get the muffler put on. but if the 3 inch is deeper or more throaty then ill get the new piping too.
:sqeyes: God I see that picture of your boat and truck and all I can say is that poor tahoe. I was in the same situation I had to get a diesel I felt bad for the tahoe..

Toomstone
12-04-2004, 11:33 AM
the denali has a k&n and a gibson on it. It pulls pretty well. but i have an f150 supercrew too and dont want to spend that much on an gibson exhaust. so im probably going with the 50 series delta. i even pulled the deckboat with the supercrew too....2WD :eek: :D
Toomstone :crossx:

Toomstone
12-04-2004, 02:09 PM
called a-ok muffler shop.... he told me the 3 inch pipe would do nothing better over the 2 and a half. and then he told me the 50 series delta wouldn't sound much different from the stock. he told me i should get a 2 chamber flowmaster which was cheaper. hes going to let me listen to it before he welds it on. thanx guys
Toomstone :crossx:

Eliminator 4 Life
12-04-2004, 02:46 PM
the denali has a k&n and a gibson on it. It pulls pretty well. but i have an f150 supercrew too and dont want to spend that much on an gibson exhaust. so im probably going with the 50 series delta. i even pulled the deckboat with the supercrew too....2WD :eek: :D
Toomstone :crossx:
oh you got the 6.0 gotcha what size is your boat??

Toomstone
12-04-2004, 11:39 PM
i have a 28 foot magic deck