Result is in

[revndave]

Today was a good day.I'd like to thank Tom and Steve for all of there help.
Pretty good for 515cu.in. and 12lbs. of boost.
http://www.***boat.com/image_center/data/500/686dyno_1102.jpg

[revndave]

http://www.***boat.com/image_center/data/500/686100_0179.JPG
http://www.***boat.com/image_center/data/500/686100_0178.JPG

[Squirtin Thunder]

What kind of oil filter is on your engine ???
Jim

[revndave]

Fram HP 4

[TRG]

what?...no video????
you had all day and did not even get any vid's?...
i thought you were a pro?
lol

[revndave]

I have a short video,but don't know how to post it

[superdave013]

1,102 otta get R done!! congrats

[revndave]

Thanks,Wanted more but ran out of blower.

[Cs19]

Eww just barely clicked off an 1100.Proved alot of people wrong. :D
917 ft.lbs. at 5000 & 1100 horse, that should get the job done.
Air was probably good today? What was the difference in correction?
Bakersfield is calling...

[revndave]

Air was good today.Bakersfield is calling.May have bigger blower by then.I wanted 14 to 16 lbs. today.8-71 didn't cut it. :umm:

[moneysucker]

OK when are you going to give all the doubters a big fat I told you so. Congrats.

[revndave]

OK when are you going to give all the doubters a big fat I told you so. Congrats.Thanks,Ready for Yuma

[Mrs CP 19]

That's great...nice numbers. Congratulations! Jill

[revndave]

Thanks Jill :D

[bordsmnj]

SOLID!! :) :) :)

[moneysucker]

Thanks,Ready for Yuma
I don't remember was I calling you out too along with everyone else I mouth off to? If so I was joking. I moonlight as a comedian. Ha ha.
Really, I can' twait to meet you out there. It is a really good time and as much as we all harrass each other, we all stick together pretty well. It will be good to add a few new faces this year.

[berk]

wow nice! curious what the final bill was, excluding freebies of course!! mind if i ask? :hammer2:

[Hal]

Like Jason said...SOLID!!

[revndave]

I don't remember was I calling you out too along with everyone else I mouth off to? If so I was joking. I moonlight as a comedian. Ha ha.
Really, I can' twait to meet you out there. It is a really good time and as much as we all harrass each other, we all stick together pretty well. It will be good to add a few new faces this year.
I talked to Darrin at Toms' shop.He said the same thing about Yuma.I'm always looking for a better place to run boat

[BlownNitro540]

Looks like you had a solid day at the dyno.

[superdave013]

dave, I have a longer belt and some bigger pullies for the bottom. You are welcome to try them if you want. I used to run 42 / 60 on my 8-71.
I think I still have 59, 60 & 61. Just sitting on the shelf now that Cyclone's done with them.

[Johnwithjm]

Nice job Blower Dave :D

[revndave]

dave, I have a longer belt and some bigger pullies for the bottom. You are welcome to try them if you want. I used to run 42 / 60 on my 8-71.
I think I still have 59, 60 & 61. Just sitting on the shelf now that Cyclone's done with them.
Thanks Dave.I have blower at 25%overdrive to make 12lbs..I'm going to keep it where it's at,till I can buy a 14-71.

[Foggerjet]

Very nice Dave, It's good to see hard numbers backing up that hard earned money spent. Congrats and good luck!
fog

[bordsmnj]

i've got ten bucks that says "blower dave" is running a psi before the end of summer :rollside: :)

[flat broke]

i've got ten bucks that says "blower dave" is running a psi before the end of summer :rollside: :)
It takes a LOT of HP to turn a PSI. He should ditch the blower and go injected turbo :) Seriously though, I'd say a 14:71 is PLENTY for what he wants to do. His motor is only a little over 500ci.
Chris

[Brian Ray]

http://www.***boat.com/image_center/data/500/686100_0179.JPG
http://www.***boat.com/image_center/data/500/686100_0178.JPG
That motor is sick..... ;) Wiping the drool off my keyboard. :hammer2:

[bordsmnj]

It takes a LOT of HP to turn a PSI. He should ditch the blower and go injected turbo :) Seriously though, I'd say a 14:71 is PLENTY for what he wants to do. His motor is only a little over 500ci.
Chris
ok, fine twenty says he goes and get a 14-71 before june. you know he can't stand to know that there's more power to be tapped. he'll try to wait,but.... blah blah blah. won't happen. that motor would handle it nicely :cool: maybe i'm syain' to much playin' the devil advocate :devil: :D

[jamessampica]

Very nice number's DAVE.It sound's like the motor was very happy on the dyno.Congrat's to you and the new BIG DOG on the water.Those pic's are nothing but awesome.Again Dave CONGRAT'S to you!!!!!!!!!LATER!!!!!!!!
JIM S
P.S. SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[UBFJ #454]

I might have missed it, but, who exactly designed & built this motor?

[cyclone]

Dave- sorry our phone conversation got cut off last night. I'm in Arkansas with god awful cell phone reception. Congrats on the big number! hopefully we'll see you at the races in a few months.

[revndave]

ok, fine twenty says he goes and get a 14-71 before june. you know he can't stand to know that there's more power to be tapped. he'll try to wait,but.... blah blah blah. won't happen. that motor would handle it nicely :cool: maybe i'm syain' to much playin' the devil advocate :devil: :D
Talked to Rick Mooneyham today about a 14-71. :D :D

[revndave]

I might have missed it, but, who exactly designed & built this motor?
Motor was built back in Michigan.Dan Nelson of Jett Performance told the guy what parts to use.It was suppose to have a PSI on it.

[hot_rod]

:idea: What fuel did you use?

[revndave]

:idea: What fuel did you use?
Sunoco 110

[revndave]

Very nice number's DAVE.It sound's like the motor was very happy on the dyno.Congrat's to you and the new BIG DOG on the water.Those pic's are nothing but awesome.Again Dave CONGRAT'S to you!!!!!!!!!LATER!!!!!!!!
JIM S
P.S. SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Jim
I have video if somebody knows how to post it.

[hot_rod]

Did you get any pulls on a pump gas setup?
P.S. I can post you vid

[Fogged Gullwing]

How much power is too much power for that boat? At 1100 are you running a double A impeller? That thing should go 60 @ 2500 rpm!!! Jack told me not to put my twin turbo motor in mine. Said it would be a potatochip upside down with 950hp. Duttweiler 468 1375hp with really small turbo's. Good luck with it be safe.
Later BK

[revndave]

I'm trying an Aggressor A

[UBFJ #454]

"Motor was built back in Michigan. Dan Nelson of Jett Performance told the guy what parts to use. It was suppose to have a PSI on it."
revn ... Know the Design is Good if Dan Designed It ... Who back in Michigan did the machine work and assembled it ..... Just Ask'n for Future Ref.
Jak

[revndave]

"Motor was built back in Michigan. Dan Nelson of Jett Performance told the guy what parts to use. It was suppose to have a PSI on it."
revn ... Know the Design is Good if Dan Designed It ... Who back in Michigan did the machine work and assembled it ..... Just Ask'n for Future Ref.
Jak
I bought boat from a guy in Michigan.Don't know engine builder.I'll find out

[UBFJ #454]

Thanks ... Would be interested in what you find out ... In Any Case, you have a very good set up.

[revndave]

Thanks ... Would be interested in what you find out ... In Any Case, you have a very good set up.
Thanks

[jamessampica]

Dave the video was great.But it sounded like it was running alittle fat on the fuel.Can you give any cylinder temp's or were those egt's just for look's.Not slamming the pull it's just my .02 cent's.Oh yes if you want to try my PSI i think we could figure put a way to make it happen.It does take alot of hp to run a PSI but you get more in return.Again DAVE congrat's to you and i can't wait to see ya on the water this summer.LATER!!!!!!
JIM S

[revndave]

Dave the video was great.But it sounded like it was running alittle fat on the fuel.Can you give any cylinder temp's or were those egt's just for look's.Not slamming the pull it's just my .02 cent's.Oh yes if you want to try my PSI i think we could figure put a way to make it happen.It does take alot of hp to run a PSI but you get more in return.Again DAVE congrat's to you and i can't wait to see ya on the water this summer.LATER!!!!!!
JIM S
That tune up with this air temp would burn it up in 1000ft.Air fuel was at 12.3.Tom and Steve said to lean for blower motor.Will be ok when air temp is 80+ degrees.

[jamessampica]

Dave the only reason i asked was my pyro reads 1400 to 1450 degree's on AVgas at wide open throttle.Just at idle it's 900 to 1000 degree's.I didn't see the temp's on the dyno sheet.I was just wondering about what they were.Thank's DAVE.LATER!!!!!!
JIM S

[Mrs. Revndave]

i've got ten bucks that says "blower dave" is running a psi before the end of summer :rollside: :)
I got $20.00 bucks that say the girls come first. Once Matthew's done with them!

[Taylorman]

Who's the hottie on your engine. Good ornament.

[bordsmnj]

I got $20.00 bucks that say the girls come first. Once Matthew's done with them!
ah,yes. priorities. :cool:

[hot_rod]

What"s a PSI?

[moneysucker]

Who's the hottie on your engine. Good ornament.
That would be my future ex wife.

[WheelerDealer]

Hey Dave, are you looking at a regular 14-71 or a Hi-Helix 14-71??

[revndave]

Hey Dave, are you looking at a regular 14-71 or a Hi-Helix 14-71??
Whatcha got?

[revndave]

I might have missed it, but, who exactly designed & built this motor?
Al Light at A&J machine
269-651-2955