Nicson O/T pipes

[SSTSleakcraft]

Anyone have any Nicson or Glenwood aluminum O/T pipes for a jet for sale?

[ITLLFLI]

Anyone have any Nicson or Glenwood aluminum O/T pipes for a jet for sale?
What motor. I have some for 455 OLDS or BB Chevy......Byron 513-470-8480

[ITLLFLI]

I sent you an email with the pic but in case you didn't get it here it is again. I have a bunch more if need be. They just need a good cleanup and they would be fine!

[1978 Rogers]

How much?

[SSTSleakcraft]

I am still looking for these if anyone can point me in a direction...

[MoJetBoPar]

Keep an eye on some Ebay auctions.
I've seen them sell for $75 and less.
Check the "Used parts" post also.

[riverbound]

I remember seeing some new ones at Rex. They were in that back room where all the clearance stuff is. They loooked to be brand new.

[sleekvino]

i have a pair there in decent shape ill let them go cheap,it shows there age but they still work.

[Cas]

I've got a set of the aluminum OT's and they only have about 5 hrs run time on them. If you see a set in real good shape for less than $200, buy them! I looked for about a year before I was able to find a couple of decent sets. The ones I have were a couple of years old but have never been drilled out and mounted.
Before buying anything though, make sure you get the right height measurements. The set I sold were fairly low and they hit the transom on my Tahiti. If your engine and logs are in the boat, measure from the bottom of the log to the top of the transom to get an idea of what you need.

[Jim Brock]

I have a set of alum ot's for jet boat, they are the tall ones so they won't hit the transom. good shape, $18o.00 plus shipping, Jim 818-890-1867 after 10am

[ITLLFLI]

On mine.....make me a offer. I will not be using them so they are just taking up space.
Byron
itllfli@aol.com

[SSTSleakcraft]

Thanks for responding. The boat has shallow freeboard, (Mandella jet). They can be as short as 8" I believe. The engine is out now, and i'm measuring as best as I can. 30" long would be fine on length. If anyone's resemble these dimensions and want to sell them post here or email NHinze@AOL.com. Riverbound, I will try to call Rex. I can't drop by to easily living in So. TX. Thanks again.

[SSTSleakcraft]

Better make that 12-16" of rise on center. I went and put a tape measure on my eyeball measurement. Can be as short as 24" or up to ? Please let me know. Thanks again, Nathan.

[SSTSleakcraft]

i have a pair there in decent shape ill let them go cheap,it shows there age but they still work.
Email me when you get a chance.

[taylormanss]

Hey Nathan did you recieve that e-mail I sent you on that v-drive in Corpus Christi?taylormanss....................