tryin to show some updated pixs

[Qjet]

[This message has been edited by Qjet (edited April 29, 2002).]
[This message has been edited by Qjet (edited April 29, 2002).]
[This message has been edited by Qjet (edited April 29, 2002).]

[quig]

Originally posted by Qjet:
here is the next phase in my "little project"
tell me what you guys (& girls) think...I would like to officially introduce the "Q-jet" to all of you and thank you for all the help every one has given me so far .Please... any comments good or bad will be welcomed http://free.***boat.net/ubb/biggrin.gif
quig
] URL=http://communities.msn.com/_Secure/0PAAAAPwVrpf02hgXnc!v3zcIJhmXL2QPEEFw1gVlK9f4kpenn wAFlDfgqJR5zDMra6bYijvbwIRJ2oniHKI7l!KCDJXnSdvJ/wiring2.jpg
[This message has been edited by Qjet (edited April 29, 2002).]
[This message has been edited by Qjet (edited April 29, 2002).]
I cant get out of this damn mess!!!!!!
sorry for all the crap but it keeps sending me back to the same place... cant deleteanything cant edit anything http://free.***boat.net/ubb/frown.gif
[This message has been edited by quig (edited April 29, 2002).]

[Oldsquirt]

Quig, I think the URL for the pic is too long to work here. Of course I'll try it anyway http://free.***boat.net/ubb/biggrin.gif
http://communities.msn.com/_Secure/0PAAAAPwVrpf02hgXnc!v3zcIJhmXL2QPEEFw1gVlK9f4kpenn wAFlDfgqJR5zDMra6bYijvbwIRJ2oniHKI7l!KCDJXnSdvJ/wiring2.jpg

[flat broke]

Originally posted by OLDSQUIRT:
Quig, I think the URL for the pic is too long to work here. Of course I'll try it anyway http://free.***boat.net/ubb/biggrin.gif
http://communities.msn.com/_Secure/0PAAAAPwVrpf02hgXnc!v3zcIJhmXL2QPEEFw1gVlK9f4kpenn wAFlDfgqJR5zDMra6bYijvbwIRJ2oniHKI7l!KCDJXnSdvJ/wiring2.jpg
I can see it now... "which wire goes to my oil pressure sender again?... oh yeah, the red one" http://free.***boat.net/ubb/smile.gif Just givin ya a little grief Qjet, the layout is really clean, keep up the good work.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net)
[This message has been edited by flat broke (edited April 30, 2002).]

[quig]

http://communities.msn.com/_Secure/0QQAAAHMXcfWn8xR3XlUWcqM!ic8ewz1c63A9aIOth7T0Mu!QN RSVi*kzak78pD!VG548VAIVcTpsSVnkLELpnLJQVHiPwfP!jtG tqzz!d9A/engine-bay.jpg

[quig]

http://communities.msn.com/_Secure/0PAAAAOIV5ZGn8xR3XlUWckD6VhkjeHM!28oyarEBI2x66fDNV wLDITRL7Ko4iCzZIZsntAmmFcuHB1Bz5s5P!dAObL3bQgf8/engine2.jpg
http://communities.msn.com/_Secure/0PAAAAOUVgZKn8xR3XlUWcqD!ul4SfX9jmpm0cg6rzeNhTwAdQ 7vZq91!tZmFAlN7RsGUQXTEaiQ3!TKbUuebx7ioUOuuFjta/engine5.jpg
http://communities.msn.com/_Secure/0QAAvGhcXo93vViYU9P7ullgbX6rklWAIA8NJNRI285WlioUvs qpEma*D4Ock67D2h2ooa0Hz2egXMyLnqiSUbAEY52qjmQ*sw*R HxlDa4yY/temp-dash.jpg

[spectras only]

Hey Guig,nice job you're getting done there!I've only have one suggestion.Noticed the blower being mounted low in the bilge.It should be placed as high as possible and close as possible to the exit,the blower intake hose should reach close to the bottom in the bilge to scavenge fumes.Blowers are sealed ,but you don't want any chance of spark close to the fumes in the lower bilge.Just my 0.02 cdn http://free.***boat.net/ubb/biggrin.gif

[Hallett19]

At least he got the distributor in the right way.

[quig]

thanks spectra !! as a matter of fact we moved the blower up into one of the side boxes for exactly that reason http://free.***boat.net/ubb/biggrin.gif

[quig]

I dunno Hallet as a complete chevy big block nut I have tried to put the flywheel on the crank pully 3 times because the distributor is on the wrong end of the motor http://free.***boat.net/ubb/biggrin.gif http://free.***boat.net/ubb/biggrin.gif
quig.