View Full Version : Any of you guys have one of these laying around?
shaun
02-03-2005, 05:34 PM
I'm looking for a edelbrock TR2X manifold, mine has cracks in it...
pic...
http://www.reitanfamily.com/albums/MotorDisassemble/IM000801.sized.jpg
victorfb
02-03-2005, 06:44 PM
can the cracks be repaired? welded?
PC Rat
02-03-2005, 06:44 PM
I have one with a cracked bottom portion (it fell). The top is still good, in fact the bottom is only cracked in one place and would be an easy fix for a good welder.
Brian
GofastRacer
02-03-2005, 07:33 PM
Shit it's aluminum, just weld it up and polish it done deal!..
BGMAN203
02-03-2005, 10:36 PM
Shit it's aluminum, just weld it up and polish it done deal!..
YUP weld and polish, you will never tell it was cracked
shaun
02-04-2005, 02:21 AM
On mine the cracks are on the bottom also, i though about seeing if i could get it welded but then the problem came to mind with it being true and seating properly.
shaun
02-04-2005, 02:23 AM
Anybody know of any good places in orange county that can do a good job welding it?
OneGuyAviation
02-05-2005, 10:18 AM
I'm looking for a edelbrock TR2X manifold, mine has cracks in it...
pic...
http://www.reitanfamily.com/albums/MotorDisassemble/IM000801.sized.jpg
contact HUD in the v-drive section. i think he has one of those
I had a crack in the hat from a back fire in same manifold from my Chevelle. I had it welded then polished. Never new unless looking in the inside with carbs off.
FlatRat
02-05-2005, 06:46 PM
Heck,
you buy the ride,I'll weld it and polish it for ya.No charge!!
GofastRacer
02-05-2005, 08:02 PM
On mine the cracks are on the bottom also, i though about seeing if i could get it welded but then the problem came to mind with it being true and seating properly.
No prob just put it up on the mill(or take it to a machine shop) and true up the surface!.. :smile:
jamessampica
02-05-2005, 08:09 PM
Yes i have one collecting dust.If the welding doesn't work let me know and i'll post some pic's.Later!!!
Jim S
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.