PDA

View Full Version : Cometic Gaskets


Fiat48
02-11-2005, 10:25 PM
Who sells em and where can I get some specs of gasket bore size and thickness of gasket?
Thanks!
Kindsvater Flat
02-11-2005, 10:45 PM
I heard Paul Fitzgerald sells them for a good price.
Some Specs (http://www.cometic.com/catalogs/AutoCat04.pdf)
Fiat48
02-11-2005, 10:50 PM
I found the Cometic gasket site...hidden in motorcycles in a search. Looks like they have a 4.540 bore gasket .040 thick which will work. Showing list price of $86 each. Ouch!
Kindsvater Flat
02-11-2005, 10:54 PM
I have seen them as low as 65 each.
Fiat48
02-11-2005, 11:01 PM
Just tell me how and where. :D
Kindsvater Flat
02-11-2005, 11:03 PM
working on that. I'm looking for a set also. :D
Kindsvater Flat
02-11-2005, 11:09 PM
http://www.4secondsflat.com/cometic.html
steelcomp
02-12-2005, 08:06 AM
Larry Peto has them, Larry's engines in AZ.
Floored
02-12-2005, 08:45 AM
I've heard they are also reusable, but don't know from experience. Have heard that WJ uses and reuses them and he makes pretty good power. They even make them for my olds now at $150.00 so 65 sounds good. :(
Blown 472
02-12-2005, 08:58 AM
Info sells them :cool:
Fiat48
02-12-2005, 10:20 AM
I'll get hold of Info. Soon as he get's back from hanging out with the top fuel guys.
Blown 472
02-12-2005, 12:10 PM
I'll get hold of Info. Soon as he get's back from hanging out with the top fuel guys.
Now that must suck :cool: :cool: :cool:
GofastRacer
02-12-2005, 08:01 PM
Also if you use the "MLS" gasket, if I remember right they are held together with rivets, I would remove them because I'd hate to have one come loose and fall into the motor!..
bbc540
02-13-2005, 11:02 AM
Shafiroff race engines 1-800-295-7142 Talk to Nick 150.00 set any size
Infomaniac
02-15-2005, 04:21 AM
I get 150.00 for them also. That is less than 5.00 over cost for me. I am trying to get (keep) my volumes up.
Custom thinknesses down to .036" compressed thickess.
Fiat48
02-15-2005, 06:38 AM
I'll pm you with an order for some Info.
How'd the clutch promotion do at Pomona?
Havasu47
02-15-2005, 11:14 AM
Dont forget Cometic gaskets like a finer surface finish.
Infomaniac
02-15-2005, 11:17 AM
Clutch did great.
Had them on 6 top fuel funny cars.
Trying to get them on a few more and some dragsters.
Made a prototype flywheel and showed it around.
Will make one out of titanium and it will get tested in Phoenix.
CircleJerk
02-16-2005, 10:07 AM
That's some neat junk! Thanks Flat and Info! I now have more confidence in my two build ups. I'm am tired of finding the best gasket for the best price, I am not a parts man nor want to depend on one!
the real k-boat king
02-16-2005, 12:19 PM
Just tell me how and where. :D
PAUL PFAFF RACING HAS THEM GIVE US A CALL 714-894-7573