Fire In The Hole

[460 jus getn it]

started the new motor went off with out a hitch. broke the cam in everything went great. the temp stayed at 150 deg the hole time. with the temp at 150 the oil pressure stayed at 60 psi. except for the small oil leak where the oil pan meets the timming cover thats the only problem. my hole week is complete, now its time to sit back and enjoy a ice cold beer......... :D :D

[Floored]

gettin close to ready for the water? whats left? looks nice in last pics

[460 jus getn it]

gettin close to ready for the water? whats left? looks nice in last pics
im planning on going next sunday, i just have to get my interior in and finish a little carpet work and im done. ill post some pics in a bit. hoping to be put in full force for spring break....................

[Squirtin Thunder]

started the new motor went off with out a hitch. broke the cam in everything went great. the temp stayed at 150 deg the hole time. with the temp at 150 the oil pressure stayed at 60 psi. except for the small oil leak where the oil pan meets the timming cover thats the only problem. my hole week is complete, now its time to sit back and enjoy a ice cold beer......... :D :D
WTF is that get on it and fix the leak !!!! Your not done yet no time for beer !!!!

[Squirtin Thunder]

:crossx: Where are the pics and vidio ???? :crossx:

[460 jus getn it]

WTF is that get on it and fix the leak !!!! Your not done yet no time for beer !!!!
ok im done for the day.ill get on the leak tommorrow. i cant get my phone to up load the video i took. ill have pics in a few.............

[460 jus getn it]

ILL GET ANOTHER PIC UP LATER

[460 jus getn it]

http://www2.***boat.com/image_center/data/520/1570S3010065.jpg

[460 jus getn it]

http://www2.***boat.com/image_center/data/520/1570S3010069JPG

[Squirtcha?]

Those headers look sorta familiar................
Congrats and nice job. Hoping to run into you and 396 this summer (figuratively speaking of course).

[MudPumper]

Looks great, hope that motor wasn't hooked to the pump while it was getting broken in. Good luck with everything it looks killer.

[460 jus getn it]

thanks dan, besides the hull the headers were the first part i bought for this project. now its all most donehttp://www2.***boat.com/image_center/data/520/1570S3010069.JPG

[LakesOnly]

Congratulations 460, lookin' good.
Remember: your build ain't finished yet. Be sure to do plug readings, and test and tune, And more plug readings. Timing changes. And more plug readings. Oh and don't forget the jetting. Oh yea, and more plug readings.
LO
p.s.: Don't overlook plug readings.

[Squirtcha?]

Congratulations 460, lookin' good.
Remember: your build ain't finished yet. Be sure to do plug readings, and test and tune, And more plug readings. Timing changes. And more plug readings. Oh and don't forget the jetting. Oh yea, and more plug readings.
LO
p.s.: Don't overlook plug readings.
Don't forget to tell him about the plug readings Paul...............
;)

[likwidsukr]

thanks dan, besides the hull the headers were the first part i bought for this project. now its all most donehttp://www2.***boat.com/image_center/data/520/1570S3010069.JPG
Yo 460 sweet!! What wires you runnin?
Steve

[454-ways-to-go]

that ah-boy 460. just remember who riding first!!! time to set everything!
OH yeah remember its a BBF not a BBC. LOL :D :hammer2:
12345678,13572468 :)

[460 jus getn it]

that ah-boy 460. just remember who riding first!!! time to set everything!
OH yeah remember its a BBF not a BBC. LOL :D :hammer2:
12345678,13572468 :)
yea yea yea :argue: :argue: :argue: :argue:

[Squirtin Thunder]

yea yea yea :argue: :argue: :argue: :argue:
Where is the vidio??????

[460 jus getn it]

Where is the vidio??????
i only took a small clip with my dig camera. how do post a video??????????????

[Squirtcha?]

I've long since lost the link, but someone one here on the board was letting us use some of their bandwidth to put up vidis. Maybe someone will jump in with a link. You can't actually put up the video on the message board, but you can link to where it is. Since they're usually pretty big files most sites won't allow you to put em up (host em).
You and Michael gonna make it to CBBB this year?

[396_WAYS_TO_SPIT]

thanks dan, besides the hull the headers were the first part i bought for this project. now its all most donehttp://www2.***boat.com/image_center/data/520/1570S3010069.JPG
Yo t-bone! How much for tha LAC sittin' in the back yard???????? :D :D Wait a minute.....THats the same spot where your boat got painted ;)
396

[396_WAYS_TO_SPIT]

I've long since lost the link, but someone one here on the board was letting us use some of their bandwidth to put up vidis. Maybe someone will jump in with a link. You can't actually put up the video on the message board, but you can link to where it is. Since they're usually pretty big files most sites won't allow you to put em up (host em).
You and Michael gonna make it to CBBB this year?
Yup;) I am NOT missing it this year. I hope they dont have a noise ordinance there as well.....If not I will be on my jetski :D :D because my boat cannot have water in the headers. My cam is too big :D
396

[76elimspecial]

Great Lookin 460. What Hp And What Work. Buildin My 460 For My Elim As We Speak. Any Dos Or Donts?

[460 jus getn it]

I've long since lost the link, but someone one here on the board was letting us use some of their bandwidth to put up vidis. Maybe someone will jump in with a link. You can't actually put up the video on the message board, but you can link to where it is. Since they're usually pretty big files most sites won't allow you to put em up (host em).
You and Michael gonna make it to CBBB this year?
you bet i will be there.

[460 jus getn it]

Great Lookin 460. What Hp And What Work. Buildin My 460 For My Elim As We Speak. Any Dos Or Donts?
im not to sure on the hp. just take your time and reserch what u want to put in too it. your can make alot of hp with the right set up. some might argue that its alot harder to make hp with a ford rather then cheby, by im not buying it(396 hint hint hint). any how just make sure that u put into it what u want, not what others think. get some good heads and solid rotating assembly and u will be just fine :D :D :D

[396_WAYS_TO_SPIT]

I will not argue about ford vs. chevy but I will say one thing...................i can check my oil and timing :hammerhea :eek: :eek: :idea: :D :boxingguy ;) :idea:
396

[Squirtin Thunder]

I will not argue about ford vs. chevy but I will say one thing...................i can check my oil and timing :hammerhea :eek: :eek: :idea: :D :boxingguy ;) :idea:
396
He will have a dip stick very soon. And as soon as I see it it will have a timing pointer added.
God Morned Chevy !!!

[460 jus getn it]

just got these alsohttp://www2.***boat.com/image_center/data/520/1570S3010072.JPG

[396_WAYS_TO_SPIT]

just got these alsohttp://www2.***boat.com/image_center/data/520/1570S3010072.JPG
Thanks to me!!! Dont forget that I hooked your a$$ with that deal!! Huh, Where would you be without 396 t-bone??? They sure do look nice. Well worth the few extra days :D :D
396

[396_WAYS_TO_SPIT]

He will have a dip stick very soon. And as soon as I see it it will have a timing pointer added.
God Morned Chevy !!!
Too bad untill then he cant check his timming or oil :220v: Its ok t-bone.....I will go outside and check my 455 olds oil and timming :D :D You know I have to bust your balls t-bone;)
396

[396_WAYS_TO_SPIT]

that ah-boy 460. just remember who riding first!!! time to set everything!
OH yeah remember its a BBF not a BBC. LOL :D :hammer2:
12345678,13572468 :)
Wait a minute johnathan............Remember you cant drive your boat without seats LOL :D :D

[460 jus getn it]

Too bad untill then he cant check his timming or oil :220v: Its ok t-bone.....I will go outside and check my 455 olds oil and timming :D :D You know I have to bust your balls t-bone;)
396
will u check the oil in the cheby for me too.o wait....................... :D :D :D

[396_WAYS_TO_SPIT]

will u check the oil in the cheby for me too.o wait....................... :D :D :D
let me go to the shop tomorrow and put the oilpan and timming pointer on and fill it with some oil. THEN I will check it;)
396

[460 jus getn it]

let me go to the shop tomorrow and put the oilpan and timming pointer on and fill it with some oil. THEN I will check it;)
396
while your out how bout u get someone on that 1000 dollar crack on the olds boat.i would hate to see another summer go bye and u not be able to hit the water.well then again u have your lice vessell to pull to the lake, that should be good enough :D :D :D :D

[454-ways-to-go]

Wait a minute johnathan............Remember you cant drive your boat without seats LOL :D :D
dont forget boats sink with cracks in it :cry: :cool:

[454-ways-to-go]

seats look good t bone :rolleyes:
i didnt know if you were ever going to get them back :notam: