parts swap

[wideopen545]

http://www2.***boat.com/image_center/data/504/317DSC01040.JPG
bbc upsweep headers coated with clappers 350.00 & shipping
a set of k&n v stacks with new filters for 4150s 100.00 & shipping
a fresh .030 454 2 bolt cam bearing and brass plugs installed
all parts are new still in boxes all you need is pistons ring and bearings
cast crank 10r/20m ready to install
large oval heads open chamber 049 cast
manley sever duty 2.250 int and 1.88 ehx new in box
comp solid cam with springs and lifters new in box
weind team g intake new in box
mildon oil pan new in box
all parts are new in box
2000.00 & shipping or can deliver up to 300 mi
set of auto meter guages 2 1/8 white face temp and oil 40.00
rex hot foot with cable 75.00 & shipping
barry grant hr 280 fuel pump fresh from berry grant 125.00 & shipping
set of k&n 4500 v stacks new 65.00
4500 INLINE or sideways BLOWER TOP 2 X 4 100.00
mini starter for bbc or sbc nice 100.00 & shipping
AT IMPELLER NEW A-2 CUT STD/STD ON THE WEAR RING SIDE 215.00 P/SHIPPING
edelbrock torker II oval port intake 125.00 p/shipping
v-drive timing cover with pump drive and water inlets 75.00 p/shipping
full face helment w/shield and d rings installed snell 95 /dot size x/large white with blue stripes 100.00 p/shipping
gm-hei std deck bbc distributor two coils one white wire coil and one yellow wire coil 75.00 p/shipping
bbc moroso valve covers tall chrome 30.00 p.shipping
more parts to come
tim 540.871.4833

[HoffmanEagleMarine]

WO454, Check your pm's regarding the ignition......Thanks, Doug

[78Southwind]

How much you asking?
manley sever duty 2.250 int and 1.88 ehx new in box

[wideopen545]

valves come with the motor setup

[78Southwind]

valves come with the motor setup
If you are going to sell individually let me know.

[wideopen545]

bump it

[dtr352]

Are the valve covers the ones in the picture? Do they say moroso on them? Do they come with breathers?

[wideopen545]

the ones in the pics are not moroso
the moroso covers are tall and yes they have breathers

[steelcomp]

who made the headers...are they the ones in the pics?? Are they blower headers?? How 'bout some measurements?
Thanks :coffeycup