Hustler, spill the beans man

[superdave013]

C'Mon, how did it do? Did it make as much power as HBjets?

[hack job]

i dont think he will know till this afternoon some time and i would guess he will do a bit better than me or hbjet.;) he better spill the beans when he gets home though :D

[Danhercules]

Ill clean them up. SPILL EM DAMIT!

[superdave013]

i dont think he will know till this afternoon some time and i would guess he will do a bit better than me or hbjet.;) he better spill the beans when he gets home though :D
I thought they did the deed yesterday.

[hack job]

last i heard it was the 24th :confused:

[Big Proppa]

I just got back from visitng everyone at the dyno -
lets just say "I'm sure he's not going to be disapointed :D

[Nucking futs]

Damn secrets !!!!!!!!!!!!!!!!!

[flat broke]

I say that on race gas he pulls 1112hp, on 91 it comes out like 948 or so
Just my guess. If I know Dave, they already made their big number (he is usually pretty close on the tuneup) and they have been messing with lash and jetting trying to squeeze more out of her.
I'm sure someone will call someone and the numbers will be known by tomorrow :D
Chris

[diggler]

Is this engine being done by DNE?
DNE will be dyno'ing my engine on April 28th. I can't ****ing wait!!!! :D :D :D

[flat broke]

Yup,
This is another DNE motor. I'm sure Joe will be pleased with the results. I'd guess he'll have the fastest of the 20' jet cruisers.... for a while.
Chris

[hack job]

i know that joe has got to be stoked! :jawdrop: ill let him post the info . a good job goes to joe and dave!;)

[HBjet]

Well, I was there with Hustler for the first 6 pulls on his beautiful DNE blower motor and it sure makes a lot of power. I can't spill the beans on what the numbers are, but the last pull I saw on 91 octane (they were going to swap pulleys for the next run but I had to go) was the best and the knowing Dave, it was only going to get better.
HBjet :boxed:

[Hustler]

Well I'm F'n happy as hell. The motor made way more than I thought it would. The best run we made on 91 octane was 956hp at 8lbs of boost, we only did did 2 runs on av gas and it made 1001hp at 10lbs of boost, I did'nt have the right pulley combinations to get it up 13lbs where I wanted it but I at least I know it will make more with the right combo on av gas. I will most likley only run it on 91. I want to thank Dave @ DNE for putting together one bad ass little 496 and putting up with my crap for 2 years and Steve @ WesTech for a great day at the dyno. :D

[LAFD]

Holy Hell. I Wont Be Able To Keep Up With Ya Joe. Someone is grinnin ear to ear. congrats joe cant wait to see it.

[MudPumper]

Fuc k Joe!!! That's bad ass. :D Let's see some pics of the new beast.

[SPECTRABRENT]

I bet the air scoop gave you at least 250 HP:).
Brent

[Hustler]

I have a few pic's but I need them resized before I can post them and I need to reload photo shop but cant find the disc.

[MudPumper]

Hey Joe, how about before you put that badboy in the Hustler lets throw it in my boat and see what happens. :wink: :wink: :D

[beached 1]

Congrats Joe!

[Bense468]

:D

[Cs19]

conrgats joe.
its gonna be a great summer, when ya gonna plop the motor in?

[JetBoatRich]

Joe, that is a lot more than you said the other night :cool: congratulations :rolleyes:
Hopefully see it run soon :cool:

[Big Proppa]

The motor sounds and looks fanfriggintastic,

[Cs19]

PICS!!! :notam:

[hack job]

:cool: congrats joe that is awesome!!!! bet you cant wait to drop it in the boat now. i know i would be iching like a dog with fleas;)

[roostwear]

Congratulations..... but WHERE THE HELL are the pics?

[Hustler]

Thanks everyone, Pic's will be up this after noon

[XClutchboy725]

So that's what you've been up to!

[Hustler]

better late than never :D
http://www.irnoyfb.com/hustler/DSC01371.jpg
http://www.irnoyfb.com/hustler/DSC01376.jpg

[kp216]

That's one sweet lookin' mill! :D

[flat broke]

The motor looks f'n bitchen Joe! Guess I was a little further off on my 91 octane guess than I had initially heard. You should easily be the king of the jet cruisers this summer. I hope ya get her dropped in soon.
Congratulations,
Chris

[hack job]

looks great!

[PC Rat]

Awesome engine. Do you know if any timing or jetting changes were made when going from pump gas to av gas?
Brian

[tahitijet]

this might be a dumb question but why is belt on one side of the tensioner pulley in 1 pick and the other side in the next? was the pic just taken in while a pully was being changed?
And that motor looks bitchen.

[Hustler]

Awesome engine. Do you know if any timing or jetting changes were made when going from pump gas to av gas?
Brian
No changes were made to fuel or timing.

[Hustler]

this might be a dumb question but why is belt on one side of the tensioner pulley in 1 pick and the other side in the next? was the pic just taken in while a pully was being changed?
And that motor looks bitchen.
one pic is the 91 set up and one is av gas set up.
Thanks for all comlpiments guys. On my limited budget this motor has been a long time coming. Now I just need to do a little pump work and replumb the fuel and water and I should be ready by the end of April.

[revndave]

Nice motor.

[HBjet]

On my limited budget this motor has been a long time coming.
Considering both of our blocks were dropped off on the same week and sonic check on the same day!
Looks great Joe and it was great to be there for its first breath!
HBjet

[HavasuDreamin']

Holy Shiznit. That is a killer looking set up. I dig those fuel lines. Good luck.......have fun. :skull:

[Wet Dream]

Well I'm F'n happy as hell. The motor made way more than I thought it would. The best run we made on 91 octane was 956hp at 8lbs of boost, we only did did 2 runs on av gas and it made 1001hp at 10lbs of boost, I did'nt have the right pulley combinations to get it up 13lbs where I wanted it but I at least I know it will make more with the right combo on av gas. I will most likley only run it on 91. I want to thank Dave @ DNE for putting together one bad ass little 496 and putting up with my crap for 2 years and Steve @ WesTech for a great day at the dyno. :D
I just want to say congrats!! Do the numbers shut anyone up? :D

[LAFD]

Damn Joe That Thing Is Sick. Very Clean. Congrats.

[TRG]

good looking engine joe!
damn!... randy made a comment about your guys' engine programs being started at the same time,...why so long joe???? if its anything like me,...prob. the funds! cant wait to see that thing in your boat!
have you made any mods to the hdwr other than the pump,...like bottom work????
what kind of speed are you hoping for???
sorry for the push of questions,...its been a while since anything this interesting! lol
Todd

[novaguy]

Very cool, Joe.....Can't wait to hang with you guys again....According to Dave, I should be good to go by mid-April. I'll keep my fingers crossed.
Take Care,
Rob

[Hustler]

good looking engine joe!
damn!... randy made a comment about your guys' engine programs being started at the same time,...why so long joe???? if its anything like me,...prob. the funds! cant wait to see that thing in your boat!
have you made any mods to the hdwr other than the pump,...like bottom work????
what kind of speed are you hoping for???
sorry for the push of questions,...its been a while since anything this interesting! lol
Todd
Funds are what slowed this project. The only thing I'm doing is a lttle pump work, you know how heavy my boat is so as far as speed goes I'll be happy to see the 70's ;)
Rob, you guys gonna hang out down in Needles with us this year?

[Havasu Hangin']

Congrats, Joe! I saw Dave putting that beast together the other day...very nice.
Is it gonna fit under the hatch? :supp:

[Hustler]

Congrats, Joe! I saw Dave putting that beast together the other day...very nice.
Is it gonna fit under the hatch? :supp:
I have a sawzall so I'm sure I can wedge it in there :D

[Havasu Hangin']

I have a sawzall so I'm sure I can wedge it in there :D
I got a big sawzall and an even bigger hammer...so let me know if you need some help.
:D

[Hustler]

I got a big sawzall and an even bigger hammer...so let me know if you need some help.
:D
Bring that hammer over, I think we made need to tweak on the carbs a little to get all of it to fit :jawdrop:

[Havasu Hangin']

Bring that hammer over, I think we made need to tweak on the carbs a little to get all of it to fit :jawdrop:
Perfect!
I have lots of "carb tweaking" experience...
:supp:

[Wicky]

I should be ready by the end of April.
Just in time for BBSP eh? I hope you can make it to speed alley.
Wicky

[Hustler]

Just in time for BBSP eh? I hope you can make it to speed alley.
Wicky
:idea: :D

[novaguy]

Most definately......I burned a hole through the piston and cracked my heads. Dave is covering everything except the cost of bare aluminum heads. I should be ready to go soon......We had a great time with you guys and would love to hang out again.

[Hustler]

Thats good news Rob. Just make sure to watch your temp constantly. There are only three gauges that really concern me, Water temp, Oil Temp and Oil Pressure. It's going to be a great summer I just hope we can keep a good flow of water this so we can head up river :D

[novaguy]

Yes, but unfortunately the water temp only measures the liquid temp and not the temp when it is steaming. Therefore, I had autometer custom make me a water pressure gauge to match my other gauges. Now I just have to figure out where the heck to install it and how....lol. Anyone care to help :idea:

[Hustler]

Yes, but unfortunately the water temp only measures the liquid temp and not the temp when it is steaming. Therefore, I had autometer custom make me a water pressure gauge to match my other gauges. Now I just have to figure out where the heck to install it and how....lol. Anyone care to help :idea:
Just duct tape it to the wheel LOL :D

[LVjetboy]

"There are only three gauges that really concern me, Water temp, Oil Temp and Oil Pressure."
Some claim a bigasstach-on-the-dash's all you need.
jer

[Hustler]

well it's all in and time to hit the water :D
http://www.hotboatpics.com/pics/data/500/1812DSC01382.JPG

[hack job]

look good man!
have fun and be safe out there! :wink:

[Hustler]

you still coming out?

[cyclone]

well it's all in and time to hit the water :D
http://www.hotboatpics.com/pics/data/500/1812DSC01382.JPG
"She's a Beaut, Clark. A Beaut!"
C'mon get to the water and give us the numbers!!!
I'm callin' 75 mph. (have no idea how it ran before)

[Raskal]

i saw it out there today.man that thing sounds and looks sweet .
good to meet you hustler .boat looks good
Ryan

[77charger]

yup it sounded and looked good but water was kinda rough.I am sure joe will tell.
it moved along pretty good.

[Hustler]

The boat ran great. The water SUCKED but I still had blast. The boat really pulls hard. I need a bigger chip for my MSD and I need to do some thing about my loader, I could only get about 10lbs of block pressure when I need about 25. All and all I'm pretty happy.

[Raskal]

yup it sounded and looked good but water was kinda rough.I am sure joe will tell.
it moved along pretty good.
were you the other boat out with him today .

[77charger]

were you the other boat out with him today .
I was with him for about an hour i had to leave at 1 pm there was another jet with him too.Mine was the wht/blu/pnk eliminator open bow

[Raskal]

thats about the time i got there .there was a lot of peeps out today .

[LAFD]

Hey Raskal I Was The Other Jet Boat With Him You Followed Me Outta The Drive Way When We Left. Damn That Water Was Rough Wasnt It.

[Raskal]

Hey Raskal I Was The Other Jet Boat With Him You Followed Me Outta The Drive Way When We Left. Damn That Water Was Rough Wasnt It.
yah the ride back was a little wet and cold . i like the name of your boat.

[missboatnam1]

very sweet joe!tell me next time you make the run to the lake i would like to see it run.

[LAFD]

Haha Yeah I Think It Pretty Funny. Yeah I Know Man I Could Cut Glass On The Way Back Geeeeez It Was Cold.

[Raskal]

yah my wife was smuggling skittles :D

[Hustler]

Raskal, it was good to meet you, if I would of known that was you in the cove I would tied off to the back you.

[Danhercules]

I cannot wait to see it man. Now you gonna sound awsome, on the beach and runnin!!!!!!
No more Fu-Fu for you with all that HP!!! :crossx:

[Hustler]

I cannot wait to see it man. Now you gonna sound awsome, on the beach and runnin!!!!!!
No more Fu-Fu for you with all that HP!!! :crossx:
No more of that stuff for me, I stoped drinking it awhile ago :jawdrop:

[Raskal]

Raskal, it was good to meet you, if I would of known that was you in the cove I would tied off to the back you.
yah when i saw you in there i was not sure .well now i know and next time ill know who you are .see yah around
Ryan