108 m.p.h. ............

[ssmike]

She's a runner (http://cgi.ebay.com/ebaymotors/1973-Litchfield-454-big-block-chevy-V-Drive-Speed-boat_W0QQcmdZViewItemQQcategoryZ26431QQitemZ463326 3763QQrdZ1)
LOL. These crack me up.....
http://i23.ebayimg.com/05/i/06/e7/b8/c0_12.JPG
"Have Dyno2000 Version 3.05 pro spec papers for the motor in boat. One of the papers tells what the horse power was with nitrous on it, but the nitrous is no longer hooked up on it and does not come with it."

[ssmike]

http://i18.ebayimg.com/02/i/06/c5/99/49_3.JPG
.... :argue:

[dmontzsta]

She's a runner (http://cgi.ebay.com/ebaymotors/1973-Litchfield-454-big-block-chevy-V-Drive-Speed-boat_W0QQcmdZViewItemQQcategoryZ26431QQitemZ463326 3763QQrdZ1)
LOL. These crack me up.....
"Have Dyno2000 Version 3.05 pro spec papers for the motor in boat. One of the papers tells what the horse power was with nitrous on it, but the nitrous is no longer hooked up on it and does not come with it."
lol. I was just going to quote that same line, I had to laugh when I saw that. He needs speed limit the boat to 105mph, anymore than that the bondo will fall off.
:rollside:

[Warlockjer]

Man I can't even comment on that one :rollside: :rollside:

[Fiat48]

My favorites:
It does 108 miles an hour and some, depending on water conditions.
Have Dyno2000 Version 3.05 pro spec papers for the motor in boat.
Some of the specs of papers are as follows: Bore 4.281in - Stroke 4.000in - Cyl Vol 943.5cc - Total Vol 460.6ci - Cylinder Heads are Canted/Rectangular Ports, Fully Ported Intake valve 2.265in (auto) and exhaust is 1.952in (auto). The compression ratio is 10.50 Lots more on papers there are 5 pages.
yep...guess there are no questions left to be answered.

[Moneypitt]

That thing wouldn't go 108 if you dropped it out of an airplane........MP

[Sleek-Jet]

I have DD version 3.10...
... and it says that the boat will go at least a 120.... :D
Man, ebay is so cool.

[Fiat48]

Yes...but do you have a 1.952 exhaust valve and a "fully ported" 2.265 Intake valve?
I didn't think so.

[BigBlockBaja]

http://i12.ebayimg.com/05/i/06/e9/f3/e7_12.JPG
You sit right next to this driveshaft spinning at speed? Looks safe.

[78Eliminator]

Shit howdy <spitting chewing tobacco out> she's got an ingin in her all right.

[78Eliminator]

I like the coil and MSD box "serving tray" LOL!!!!!!!!!!!!!!

[obnoxious001]

No one has mentioned that the sheet on the heads is for small block heads, 2.02 intake, 1.60 exhaust. He isn't charging extra for custom adaptation.
http://i17.ebayimg.com/01/i/06/e2/a4/85_3.JPG

[Sleek-Jet]

Yes...but do you have a 1.952 exhaust valve and a "fully ported" 2.265 Intake valve?
I didn't think so.
No, but I run my computer on 240 volts, that makes it much faster... :D

[Rexone]

The seats are in fair condition and need a little repair.
Yeah at least. :boxed:
gotta love ebay.

[scottys]

Looked like it said item location "Compton"

[cdnguitarsnboats]

http://i12.ebayimg.com/05/i/06/e9/f3/e7_12.JPG
You sit right next to this driveshaft spinning at speed? Looks safe.
Sure it's safe. Isn't that what the extra header is for? Oh, wait, you don't get that one. Maybe he has some hi-tensile strength PVC for the driveshaft instead.
J

[Warlockjer]

If he thru in that extra pipe I would probably bid on it :rollside: :rollside: :rollside:

[Itsahobby]

I really like the plumbing on the waterpump. It's amazing that stays on at 108.
:rolleyes:
Hobby

[Flat Hall'N]

I really dig the white painted exposed drive shaft!

[slovolvo]

Dude, that thing is sweet! Does it come with a mullet? Gotta knock out a couple teeth to run that thing, but once your mullet gets caught in the drive shaft, that should be no problem.....

[rrrr]

Duuuuude! Where can I get these cool stick-on, block letter, reflective suh-weeeeet registration numbers?????? :crossx:
http://i23.ebayimg.com/01/i/06/e7/bb/bd_12.JPG

[YeLLowBoaT]

if that boat goes 108 then my bronco gets 40 mpg.....towing that boat at 108 with a 30 mph head wind. :crossx:

[Itsahobby]

Wow, $3550 reserve not met :eek:

[Roaddogg 4040]

Must run a little hot with the water hoses kinked in half! Boy, too bad I just bought another boat... :cry: :cry: :cry:
Steve

[dmontzsta]

anyone notice the "fear this" sticker on the transom.

[Flat Hall'N]

Duuuuude! Where can I get these cool stick-on, block letter, reflective suh-weeeeet registration numbers?????? :crossx:
http://i23.ebayimg.com/01/i/06/e7/bb/bd_12.JPG
LOL!! Thats classic! :rollside:

[fc-pilot]

anyone notice the "fear this" sticker on the transom.
I do fear it for a couple of reasons. With my luck one of my friends would buy it and then ask me to help work on it (aka. have me do all the work on it). The other reason is I would fear it being on the lake anywhere near me and blowing up and having pieces hit me and/or my boat.
Paul

[Flat Hall'N]

anyone notice the "fear this" sticker on the transom.
I think it's appropriate :skull:

[49er]

Dude, that thing is sweet! Does it come with a mullet? Gotta knock out a couple teeth to run that thing, but once your mullet gets caught in the drive shaft, that should be no problem.....
I do believe I found the driver

[YeLLowBoaT]

http://www2.***boat.com/forums/attachment.php?attachmentid=13224
now thats a mullet....

[Schiada76]

After checking this thread I'm going to have to sell my boat, I just went thorough the whole thing 500ci bbc, blown, chilled, new roller, new hat.
It's got to go.
Since this boat will do 108 mines gotta do 250 easy and I don't have the stones for that. :p

[BIG TIME]

that boat is sweeeeeeet!

[mickeyfinn]

Kinda surprised no one has commented on 10.5 compression and nitrous. Isn't that a little high for a nitrous application?....Course on e-bay you could put nitrous on anything.

[BIG TIME]

promods run 15-1 with 3-4 stages of nos....

[slovolvo]

http://www2.***boat.com/forums/attachment.php?attachmentid=13224
now thats a mullet....
LOL, that is def a mullet. That dude make Joe Dirt look GQ.
YB, I bet thats what he looks like. He probably wears cut off jean shorts on the water too.

[dmontzsta]

http://www2.***boat.com/forums/attachment.php?attachmentid=13224
now thats a mullet....
Nice, its Kim Hanson.

[Flat Hall'N]

Nice, its Kim Hanson.
Thats definatley business in front and party in the back :2purples:

[mfrey]

http://www.***boat.com/image_center/data/520/1472timeslip-med.jpg
The timeslip is rock solid proof that it really does 108.

[Moneypitt]

I can't read any of that, too small.......But my truck once ran a 6.28@237. I've got the time slip to prove it!!............MP

[Fiat48]

That was a high 5 second pass by my slide rule. Must a dropped a couple cylinders and shaved off some mph at the big end.

[502 JET]

http://i12.ebayimg.com/05/i/06/e9/f3/e7_12.JPG
You sit right next to this driveshaft spinning at speed? Looks safe.
The description says Mallory electronic ignition??Looks like MSD to me.

[campbell0691]

Hey bring it out to ming and run it in the river racer. Go up against others and lets put it too the test!!!!. Just make sure you get your safety equipment, jacket ballistic shorts and then lets go to the rope!!!!!!!!