I need pics of V-Drives mounted.

[dmontzsta]

I dont know what kind of brackets I need to make, I have an idea, but just need to see some pics.
Thanks.

[GofastRacer]

I dont know what kind of brackets I need to make, I have an idea, but just need to see some pics.
Thanks.
There's a couple here at different angles, hope it helps!..
V-Drive pics! (http://pg.photos.yahoo.com/ph/gofastracer/album?.dir=6212&.src=ph&store=&prodid=&.done=http%3a//photos.yahoo.com/ph//my_photos)

[dmontzsta]

There's a couple here at different angles, hope it helps!..
V-Drive pics! (http://pg.photos.yahoo.com/ph/gofastracer/album?.dir=6212&.src=ph&store=&prodid=&.done=http%3a//photos.yahoo.com/ph//my_photos)
Thanks as always Art, you have been a big help with everything everytime I post.

[GofastRacer]

Thanks as always Art, you have been a big help with everything everytime I post.
You're welcome!. ;)

[FlatRat]

There's a couple here at different angles, hope it helps!..
V-Drive pics! (http://pg.photos.yahoo.com/ph/gofastracer/album?.dir=6212&.src=ph&store=&prodid=&.done=http%3a//photos.yahoo.com/ph//my_photos)
After looking at those pics....I need a smoke.....
Nice work Art!!

[GofastRacer]

After looking at those pics....I need a smoke.....
Nice work Art!!
Well thank you I appreciate that!.. :cool:

[EXTREMEBOATS]

Art,
Once again you made me all tingly inside!!! :D :D :D Kristina

[flattie]

Here is pic of my V-drive and brackets. I would also like to say Tom at Menkins did a bitchin job on it installing a Whirl a Way and accent polishing it
http://www2.***boat.com/image_center/data/520/709DSC02791.JPG

[GofastRacer]

Very nice but only the best comes from Tom!.. :cool: :cool:

[VD CRUISER]

He sure did. What kind of finish is on the cast areas?

[GofastRacer]

Looks like bead blast with a clear on it???..

[moneysucker]

Here is pic of my V-drive and brackets. I would also like to say Tom at Menkins did a bitchin job on it installing a Whirl a Way and accent polishing it
http://www2.***boat.com/image_center/data/520/709DSC02791.JPG
So you are the other one with dollar bills in the bilge? Does everyone ask why you didn't use hundreds? Looks very nice, I hope I can make my newest project look that good.
Cy

[dmontzsta]

I am thinking of just using 4 L brackets cut from billet. Repo Man has a huge piece of billet that is already L shaped. I am going to use 2 Ls on each side, very similar to Art's set up. I am thinking of powdercoating the case dark blue and polishing the fins and bolts.

[flattie]

Cuz there is over a $100.00 all over the floor

[V-DRIVE VIDEO]

I am thinking of just using 4 L brackets cut from billet. Repo Man has a huge piece of billet that is already L shaped. I am going to use 2 Ls on each side, very similar to Art's set up. I am thinking of powdercoating the case dark blue and polishing the fins and bolts.
Sounds good Don, remember, the point where the v-drive mounts to the hull is the place the propeller energy pushes the boat from. Dont skimp on hardware. :cool:

[moneysucker]

Cuz there is over a $100.00 all over the floor
My response is, " I spent $400 on the paint and clear in the floor and all I had left was ones."

[olbiezer]

hey guys new to v drives here. have a 77 barron sprint and the v drive shifter ( or whatever it is tech called) on my v drive is a large pin that pulls out and slides down to engage the prop, not a handle like arts daytona or some other shown on here. is there a kit or something i can get for the handle? seems the pin like mine is hard to get enough pressure to engage prop every time. let me know please. thanks ....... olbiezer (should i change the old screen name? lol)

[beaverfab]

Locking shift handle $100.00 I make them in 3 lengths [Short 7" Med 9" and Std 11" ] Let me know if I can help. j.j. :rollside:

[lucky]

Here is pic of my V-drive and brackets. I would also like to say Tom at Menkins did a bitchin job on it installing a Whirl a Way and accent polishing it
http://www2.***boat.com/image_center/data/520/709DSC02791.JPG
wow you got change too ! very nice

[olbiezer]

hey beaverfab leave me your number or email or email me at louville50@aol.com thanks