ford camshaft

[tahiti cowboy]

Ya I just bought a complete 466 ford from a guy and every thing is great with the motor butt the cam in it i cant find any specs on cam he said that the cam was a ford motor sports cam that he bought about 5-6 yrs ago cant find the card the only number on the cam is 961734 if any body has any idea on this cam please let me know he said he knows its over .600 lift butt im not sure

[LakesOnly]

Don't have a catalog from 5-6 years ago, but today the only cam FRPP offers that is over .600 lift is a roller cam. You got a roller in that motor?
Part Number: M-6250-A514
514 Mechanical Roller 304° 308° 0.647" 0.647"
LO

[tahiti cowboy]

No its not a roller he said its a big hyd

[spectras only]

Tahiti , I have the older catalog at home .I'll look up the cam for you later.

[tahiti cowboy]

that would be great i hope its in there

[Norseman]

that would be great i hope its in there
If it's not, measure it, that way you know exactly what it is!!!!!

[spectras only]

Tahiti , I have a Motorsport catalog that goes back to
99 ,and have a new one . They don't list their cams with the number you have . It looks like that number is a
casting number . You probably have the M-6250- A443 cam .

[steelcomp]

I have a '98 catalogue and they list the M-6250-C460 cam as a hyd. flat with 310/320 adv. dur, 244/254@.05 with .588"/.614" lift.
Tha A443 cam is 300/300, 234/244@.05 with .562"/.588"
If it's over .600, then you have the C460 cam. It's the one they put in the SVO 460 "CobraJet" motor which Ford listed as 535hp @ 6250 and 535 lb/ft @ 4750 with CJ alum heads and 10.5:1 flat tops, Victor int. and an 850 Holley. I know for a fact that the motor made closer to 580 hp. and about 550 lb/ft.