Help Where to get alum clamps for SS hose

[Jake W2]

I was wondering if you guys knew where to get the alum clamps for SS hose like you see when they run two or three side by side ect.
http://www2.***boat.com/image_center/data/500/2339DSCN1285.JPG
Thanks Jake

[Oldsquirt]

You can get the doubles here:Billet Specialties (http://www.billetspecialties.com/item.asp?cid=7&scid=8&pid=202) Don't know about the triples. Maybe Superdave013 can help you.

[superdave013]

That one still has the lay out die on it. Looks like he made it. If you find a good source let me know. Those would be hard to stock because I would never know what size the 3 hoses would be. So yeah, if you find a source where that has a wide selection that would be cool.
I use zip ties myself. I put one around all the hoses keeping it kinda loose. Then I put one around that one but in between the hoses. Once you tighten things up it keeps all the hoses flat and the distance of a zip tie from each other.

[RandyH]

Earls make a varity of them. You typically have to wait for special orders,as most speed shops wont handle the triples or bigger. Good Luck,
http://members.ozemail.com.au/~earls/earls40.jpg
RandyH

[Jake W2]

Thanks for the info guys .I think the doubles will work just fine.
Jake

[Mr.&Mrs.Budlight]

Jake, I bought some 1" square rod in clear plastic yesterday. I'm intending on making my own billet plastic clear hose holders. Give me a few days to make the ones for Misfit, and I'll see if you like them. What I like about them is I can make them special for each application and to hold as many lines as I want. ps. their lighter too. Budlight

[Jake W2]

I ordered some in billet but what about green plastic?
Jake

[Mr.&Mrs.Budlight]

Jake, I think there may be some colors available but will it be the right green? I'll ask the next time I'm there. Budlight

[Crazy Squeeek]

1" square rod
Anytime you refer to square stock, its called " bar " any time you refer to round stock, its called " rod " I'm not being pickey, just letting you know there IS a deference. I mite be interested in a few clear plastic one's myself. post some pics when you get a chance. SqK :hammer2:

[Jake W2]

:(
Jake

[Mr.&Mrs.Budlight]

The catolog from the supplier called it square rod. I personally thought "Bar" refered to metal stock. :D Budlight

[HoffmanEagleMarine]

Jake, We fab these all the time. Any size for any hose....PM and let me know what size hose if interested..........Doug
http://www2.***boat.com/image_center/data/520/2325P1010079-med.JPG
http://www2.***boat.com/image_center/data/520/2325P1010076-med.JPG
http://www2.***boat.com/image_center/data/520/2325P1010073-med.JPG

[Jake W2]

Hey Doug very nice.I have already ordered some double -8 .But might need one triple.You make them for spark plug wires also?
Noticed the scoop for the Earl ,its gona look nice.
Jake

[HoffmanEagleMarine]

Jake, Any size or shape, satin scuff or raw aluminum. You can polish them as my lungs can't take it anymore!!! :cry: LOL!!! I almost forgot, I finally mounted the rails and set the motor in. I'm making the templates for the motor plates in the next few days...Doug

[Jake W2]

Check your PMs Doug.
Jake

[tahitijet]

Jake, Any size or shape, satin scuff or raw aluminum. You can polish them as my lungs can't take it anymore!!! LOL!!! I almost forgot, I finally mounted the rails and set the motor in. I'm making the templates for the motor plates in the next few days...Doug
Can I contact you about these? I've been looking for something just like this to attach to a custom truck frame i built to hold stainless fuel, brake, and air lines but i haven't been able to find anyone who will custom make them?
thanks

[HoffmanEagleMarine]

Tahitijet, No problem. PM me with your measurement or call us @ 916.257.2740....Thanks, Doug

[Jake W2]

Doug got the triple -8 clamp yesterday loos nice, thanks alot.
Jake