PDA

View Full Version : wanted-headers..


DUNDUN
04-10-2005, 03:58 PM
im posting this for my dad...
looking for a nice set of used water injected headers. prefer bassett's but would take rewarders or something along those lines. prefer non-twisties but if they are in nice condition, we might take them.
we already have the lines and such for water injection.
we are aiming for the $200 or lower price range if that's doable.
thanks in advance. :shift:
76BARRON
04-10-2005, 04:34 PM
To bad you didn't post this yesterday,because I saw a few sets at the Long Beach swap meet today. I could of at least got a few phone numbers for you !
Oh well maybe next time! Next swap at LB is May 8. I think pomona swap is comming up on 4/24/05
If your are willing to replate/ceramic coat I may have a set of bassets available. Remember v-drive and jet headers are different!
DUNDUN
04-10-2005, 08:10 PM
aww thats too bad, thanks anyway though john, ill let my dad know about the upcoming swap meets. we're hoping to get some that dont need recoating.
and yes, BBC V-Drive headers...
DUNDUN
04-11-2005, 06:26 PM
Bump.
76BARRON
04-11-2005, 08:14 PM
Hey , Brandon(HFK) you guys thinkin on mixing it up with the K- Boats again like last year ?:D
Looked at your web page a bit, and you sound like 40 somthing years old :D
Dude, you were born 25 yr's to late :D You sound kinda like ...................
.........mmmmmmmmmmm.......... ME!............Back in the day! :D
oh..YEH... Kip say's get your own frickin chip's!! :D
76
Fired Up
04-11-2005, 08:20 PM
Do you need them to go over the transom? I have a set of Bassets that have been sitting in my garage, but will not extend past the transom on a v-drive.. I used them once and went to a shorter pipe. They are a 2 1/2" tube, 3 1/2" x 10" collector. Hate to have them sitting if someone can use them. They do have some rust but if you need a set they are a great buy. Below your price range too.
DUNDUN
04-11-2005, 08:57 PM
mixing it up with the k-boats? i have no clue what you are talking about.. :hammer2: lol and we arent gonna make needles this time, maybe next time, and i am just a 16 year old kid so yeah, i dunno. haha.
and fired up, do you have any pics? thanks. :rollside:
DUNDUN
04-12-2005, 02:32 PM
bump... again. :hammer2:
DUNDUN
04-13-2005, 09:16 PM
╙╫♦⌐坥╢╖ÉÆH→↑╥«ë«φ|ï♦ ~☻ô╚Ñ╥╫╓╚§Ä≈Ånô╚AÄ╨╩. ..
ssmike
04-14-2005, 10:30 AM
HFK -
I have a decent set of headers that came with my superstock....In need of coating - but the price is right...
I think they are still sitting at Billy B's shop. Head over there and check em out.
DUNDUN
04-14-2005, 02:56 PM
ss mike..do you have any pics? thanks.
ssmike
04-14-2005, 04:52 PM
i should have one I can scan...they need to be coated but were decent shape from what I recall......Let me take a look
DUNDUN
04-14-2005, 05:09 PM
alrighty, thanks!
Fired Up
04-15-2005, 08:59 PM
HFK,
For some reason I have problems uploading photos in the site, but I can send you photos to your e-mail address as an attachment if you like.
DUNDUN
04-15-2005, 09:51 PM
thatd be great!, im pming you right now w/ my e-mail address, thanks!
DUNDUN
04-18-2005, 04:11 PM
bumpage.
DUNDUN
04-23-2005, 02:37 PM
id really appreciate it if ya'll goin out to needles could keep an eye out for a decent set of headers in our price range..thank you.
DUNDUN
05-09-2005, 04:55 PM
Bump.
ssmike
05-09-2005, 07:16 PM
ss mike..do you have any pics? thanks.
the headers I have are race deals - dry without water injection.
Still interested?
DUNDUN
05-09-2005, 07:20 PM
naah..thanks anyways ss mike.
AJ
05-09-2005, 07:31 PM
im posting this for my dad...
looking for a nice set of used water injected headers. prefer bassett's but would take rewarders or something along those lines. prefer non-twisties but if they are in nice condition, we might take them.
we already have the lines and such for water injection.
we are aiming for the $200 or lower price range if that's doable.
thanks in advance. :shift:
I have two set's of used bassett water injected headers. Send me your
e-mail & I'll send you pics.
FlatRat
05-10-2005, 01:51 AM
the headers I have are race deals - dry without water injection.
Still interested?
SSMike,
whatcha got?Are they short collector,have pics?Looking for some for the Runnerbottom Howard.Thanks,Rat :eat:
DUNDUN
05-10-2005, 02:42 PM
http://www2.***boat.com/image_center/data/520/1508The_boat_Needles.jpg
tough to see but they are just bassetts they are sawed off a little bit but i dont know the specifics on them though..
we would like to get a set like these. thanks for the replies...
ssmike
05-10-2005, 07:45 PM
SSMike,
whatcha got?Are they short collector,have pics?Looking for some for the Runnerbottom Howard.Thanks,Rat :eat:
Rat:
If you cut them, they'll be short. I'd do the ceramic coating also. Price is definitely right.
Let me try to dig up some pics....
FlatRat
05-11-2005, 02:11 AM
Rat:
If you cut them, they'll be short. I'd do the ceramic coating also. Price is definitely right.
Let me try to dig up some pics....
Sounds good.
DUNDUN
09-26-2005, 10:19 PM
<u>BUMP!</u>
headers asap?
DUNDUN
09-27-2005, 02:27 PM
double bump?
Michael Minegar
09-27-2005, 02:47 PM
Iv'e got some that I would let go for 125.00 plus shipping. Look in ***boat.com under image center and put mike minegar under search. The pictures of the headers will come up. If interested call me at 208 863 2975. They have all the water stuff with them.
DUNDUN
09-27-2005, 02:56 PM
no offense, but we are trying to stay away from any possible cracking. thats whats wrong with ours, except ours are alot worse.. lol
thank you anyways though, i do appreciate it.
DUNDUN
10-10-2005, 12:04 AM
i cant sleep.. too worried about headers....
actually im not but it sure would be nice if you guys had some for sale...
BBC V-drive headers....
gracias.