steering cables

[olbiezer]

just out of courisity how tight should the steering cables be as they run down the stringer to the pullies? new to this type steering .......thanks

[Moneypitt]

Taut, not over tight. I would guess that an unsupported cable, on a 3-6ft run should have about 1/4 to 3/8ths inch of side deflection. Depth of pulley grooves could be a factor, but most contain the cable quite well. An over tightened cable will increase wear and tear on the pulley bearings. Just my .02, others may have different ideas..........MP

[olbiezer]

thanks money that seems to be what i have as far as slack in the cables as they run to the rear thanks

[GofastRacer]

Just grab a cable at the quadrant and pull up with moderate force, if the quadrant moves it's too loose!..