21' daytona

[565edge]

Who here has pics and info on 21' eliminator daytona's.I might be buying a 1995 over the weekend.How fast and how much power to get their.I plan on building a blown 540.Let me know.Plan on running it at ming and at the river.Lets see pics!!!Here that deputy dawg,PICS.

[steelcomp]

You been gone too long!!! Wassup big dude! :D

[565edge]

Been lurking.Bought a house and have been working my butt off.I have the boat bug bad.Whats up with you?Know anybody with a blower for sale?

[MudPumper]

I talked to the guy that owns this one last Saturday and he said he is running about 1000HP and runs in the neighborhood of 110. I know they ride bitchen.
http://www2.***boat.com/image_center/data/520/1653IMG_0243.JPG

[565edge]

Nice looking boat.Did he say who set it up?Thanks

[MudPumper]

Nice looking boat.Did he say who set it up?Thanks
No sorry, didn't ask. I want one though. They are deffinately bad ass. I'm pretty sure Tom Papp makes a bitchen 21', might want to check it out.

[steelcomp]

No sorry, didn't ask. I want one though. They are deffinately bad ass. I'm pretty sure Tom Papp makes a bitchen 21', might want to check it out.
Hmmm. Seems to me that ought to sound familiar, eh Alan?? Ever heard of a Stealth?
I'm building a blown alky for my Bahner...but it's going slow. You know, the $ thing. Owning a freekin house is xpensive!
Good to hear from you again! :cofeycup

[revndave]

Who here has pics and info on 21' eliminator daytona's.I might be buying a 1995 over the weekend.How fast and how much power to get their.I plan on building a blown 540.Let me know.Plan on running it at ming and at the river.Lets see pics!!!Here that deputy dawg,PICS.
Tom Papp 21 phantom 1100 hp set up by Tom 112+mph

[FuelInMyVeins82]

I beleive one ran in the mid 8's w/ around 1300 hp. I know DNE built the motor and MPD did the pump they might be ones to ask, if your looking to go that fast

[Gamer]

Here are some pics of my 21' Daytona two seasons ago. The specs were 540 (dyno 888hp) with a completely stock (grate & shoe etc) Dominator Pump with an “AA” bronze impeller. The pump was rebuilt when I bought the boat and I ran it a season before installing the new motor. The best I got out of the boat was 86@4700-5000rpm with 4 passages and full tanks of gas. The boat would cavatate at high speed so I didn't get much out of it. I'm stepping up the motor this season and looking for an extra 120hp. The pump is now a Stage 3 MPD blueprinted pump with SS “A” impeller and all the goodies (inducer/loader etc). Once I dyno the motor again and setup the pump correctly I'm hoping for 110+mph out of the boat.
http://www.hotboatpics.com/pics/data/500/3025DSC02984.jpg
http://www.hotboatpics.com/pics/data/500/3025DSC02987.jpg
http://www.hotboatpics.com/pics/data/500/3025DSC02989.jpg

[565edge]

Gamer what size blower is that?What are your motor specs?Have you guys heard of a 21' daytona called turkey lips?Any info?

[Cs19]

Yeah, Ive heard of it. In my opinion, its the most dialed in 21 daytona around.
Allen, got your pics, cut a check for that thing already.

[FuelInMyVeins82]

Yeah, Ive heard of it. In my opinion, its the most dialed in 21 daytona around.
Allen, got your pics, cut a check for that thing already.
CS is that Kevins deal w/ the nitrus motor

[Cs19]

yeah.

[Restless22]

A friends boat. (now sold)
http://www2.***boat.com/image_center/data/500/833DSCF0044-med.JPG
Another nice 21
http://www2.***boat.com/image_center/data/520/833DSCF0023-med.JPG

[mrgoslow]

21' eliminator at our lake with a blown 509 w/709 hp that runs upper 90's with style and comfort. real nice hull.

[MAXIMUS]

In my humble opinion, you better have your shiat together if you plan on running one of these boats over 100!

[Taylorman]

CS is that Kevins deal w/ the nitrus motor
Anyone have a picture of that boat?

[Taylorman]

Im looking for websights with boats for sale. The only one i know of is boattrader.com. Can everyone list others that they know of.
Kevin

[TIMINATOR]

My 21 Daytona is for sale with or without the regular gas 572 motor. Ran 96 last year with the small cam, on the motor. On the bottle it is fast. The pump is fresh and full of SS and other goodies. It runs Lightning headers too. I don't post here much, REAL BUSY! CALL ME if interested. 623-877-8553 anytime TIMM

[Sangster]

Im looking for websights with boats for sale. The only one i know of is boattrader.com. Can everyone list others that they know of.
Kevin
Try WWW.dragboats.com

[PC Rat]

In my humble opinion, you better have your shiat together if you plan on running one of these boats over 100!
What shiat does a person have to get together?
Are you talking safety shiat or setup shiat?
Brian

[MAXIMUS]

What shiat does a person have to get together?
Are you talking safety shiat or setup shiat?
Brian
Set up! You can throw a lot of power at one of these rides & with out a "good" set up it just won't get up & air out! When I first put my set up together It wouldn't run over 88 mpg with a stainless a impeller at 6100... After spending some time at mpd, my engine builder & myself made some improvements & it responded well....

[MAXIMUS]

What shiat does a person have to get together?
Are you talking safety shiat or setup shiat?
Brian
Set up! You can throw a lot of power at one of these rides & with out a "good" set up it just won't get up & air out! Most of the ones I have seen claim 100+ & looking at the hardware I see otherwise... ;)

[565edge]

Maximus,Does your boat have a dropped keel or is it all hardware.Did marty stretches boat have a dropped keel or was it a factory bottom.Thanks for the info.

[MAXIMUS]

Brian at B&D Marine flipped the boat & put a dropped keel on it. I don't remeber the exact dimensions however... :confused:

[565edge]

How much intake pressure do you see?Did you measure it before and after the dropped keel?

[HBjet]

I talked to the guy that owns this one last Saturday and he said he is running about 1000HP and runs in the neighborhood of 110. I know they ride bitchen.
http://www2.***boat.com/image_center/data/520/1653IMG_0243.JPG
This boat was setup by GS Marine. I've ran next to him a few times. Fast boat, but is nothing compared to CS19 running next to me. When this 21 and I paired up it was an even run (with a running start) until I just ran out of motor, then he kept going. If we ran out of the hole, he'd need more then a 1/4 mile to catch up! haha... Nice Guy though and cool boat for sure!
HBjet

[HBjet]

I beleive one ran in the mid 8's w/ around 1300 hp. I know DNE built the motor and MPD did the pump they might be ones to ask, if your looking to go that fast
Marty's boat... I believe it ran in the teens without nitrous. Not bad with 1000hp single carb motor that Blown472 says was on a "Hot" dyno. Must be some real DNE magic if it's not really making that much power but still runs in the teens with 2 other 1000hp deals. haha!
HBjet

[kojac]

Marty's boat... I believe it ran in the teens without nitrous. Not bad with 1000hp single carb motor that Blown472 says was on a "Hot" dyno. Must be some real DNE magic if it's not really making that much power but still runs in the teens with 2 other 1000hp deals. haha!
HBjet
To Me that would be the ulltimimate boat. Real nice ride.,In the mid teens. More room, better rough water handling, One carb. Less gas. Give up a little speed but,
Hell I would trade both my 19 footers tunnels for that combination.
Kojac

[Cs19]

I dont think people realize how hard Marty worked on getting the boat to those speeds, it wasnt like he plopped the motor in and went 8.55 @ 127 mph, they were CONSTANTLY testing and trying new ideas.
I agree with Maximus,you gotta have your sh*t togethor to get one going, even with the best motor, you still need to get it set up.

[HBjet]

I dont think people realize how hard Marty worked on getting the boat to those speeds, it wasnt like he plopped the motor in and went 8.55 @ 127 mph, they were CONSTANTLY testing and trying new ideas.
I agree with Maximus,you gotta have your sh*t togethor to get one going, even with the best motor, you still need to get it set up.
Very true, and I believe his jet pump (from intake to nozzle) was a combination from just about evey mfg out there...
HBjet

[565edge]

I just got back from looking at it.Very clean!Needs a rail kit though.My loan wont come through till next week.I will pick up next sunday.Boat has a set back dominator pump with droop and place diverter.It has a 1 degree tapered shoe and ride plate.It has a inducer and a A-cut aggressor mag bronze.I might just put the motor in it and run it this summer.It has a 10-1comp 511" chevy with rec port open chambers.Im worried about the block being so bored out.The motor is all fresh and isnt back in the boat yet.Its got a victor ram with 2 750 double pumpers.Do you think this boat could run in the 80's with this motor?

[steelcomp]

Do you think this boat could run in the 80's with this motor?
That depends...are YOU driving, or me?? :D :D
(Sorry...couldn't resist, oh Large one!)
Hey...just get the thing and put it together. It'l do what it'l do, and if it's not good enough, SPEND MORE MONEY!!! :D :coffeycup

[MAXIMUS]

This boat was setup by GS Marine. I've ran next to him a few times. Fast boat, but is nothing compared to CS19 running next to me. When this 21 and I paired up it was an even run (with a running start) until I just ran out of motor, then he kept going. If we ran out of the hole, he'd need more then a 1/4 mile to catch up! haha... Nice Guy though and cool boat for sure!
HBjet
I raced a GS rigged kevlar 21 with a blown 572 that was real fast. We left from about a 30mph several times & by the time my gps said 85 the race was more than over... I have not seen a lot of honest 100 mph 21 daytona's.

[MAXIMUS]

How much intake pressure do you see?Did you measure it before and after the dropped keel?
Intake psi on my set up is pretty low. I think the most I have seen was around 25 psi. My motor & pump tends to process more water than the sled they are attached to can feed. At 6 psi of boost I was spinning on a good cold dry day around 6300 with a mpd stainless A. Now at 9psi I can spin 6400 on the hottest humidest day the summer has to offer... Haven't made any runs in the good cold winter air yet. Top speed so far to date was 4 seperate runs at 109 with 6 psi of boost & 6100 rpm. I haven't tested in a year & a half & probably won't do so for another year or two. Seems to run pretty well however! :D

[HBjet]

I have not seen a lot of honest 100 mph 21 daytona's.
I haven't seen a lot of honest 100mph boats period. I know they are out there... nothing better then racing a guy, beating him and him telling you his boat goes 100mph so I must be going faster then that. Then me saying my boat has never touched 100mph. The Lie Detector!
HBjet :D

[LOWRIVER2]

Hey CS 19,
Did Marty sell the Daytona? Have'nt seen it on the river in a long time.
It pulled the kids nicely on inner tubes too/lol.

[Cs19]

Yeah, he sold it. He's now in a 22 Placecraft deckboat, using the same engine from the 21. I wouldnt be surprised to see it at Ming one of these days knowing Marty.
A little off topic here, but I hear the PC 22's are working well with jet-drives and big HP, maybe something to consider if you dont want a 21 daytona or cant find one.
See ya at the riv. Lowriver. :)

[565edge]

Chris if it goes as planned i am picking the boat up sunday.If your at ming you will see it.Danny is supposed to bring my lifeline gear back sunday.So i will swing buy on my way home.Talk to you later.

[Cs19]

Oh cool, your gonna run river racer with the new boat? :D
See you there,hopefully you can make it Sat. night.
CS

[565edge]

I will later this year.I need to get the boat running first. :idea:

[Cs19]

I know, j/k Allen.
Hey, ill see ya up there, good luck with the purchase.

[LOWRIVER2]

See ya at the river CS,
Might see ya at Ming this weekend first.