diverter steering arm needed.....

[396_WAYS_TO_SPIT]

I need the 2 arms that connects to the nozzle of a place diverter. Its the arm that holds the diverter cable and steering. The other one is for the reverse cable. If anyone has one laying around please let me know. I need to find a used chaep one.
396

[Oldsquirt]

Check your PMs. I have some I might trade.

[Oldsquirt]

Check 'em again and give me a call or PM.

[Oldsquirt]

Bumpity-bump.
Hey Michael, we gonna do this or not? :confused:

[396_WAYS_TO_SPIT]

Bumpity-bump.
Hey Michael, we gonna do this or not? :confused:
Check your pm's bud;) We might have to trade everything except for the up and down part of the diverter. That means you will be getting my polished piece(left and right) :cry: :cry: I will have to spend some more time in the polisher :eek: :eek:
396

[Oldsquirt]

Got the PM. If you want to just do the brackets and reverse gate that will work just as well for me AND save you that polisher time. :D

[396_WAYS_TO_SPIT]

Got the PM. If you want to just do the brackets and reverse gate that will work just as well for me AND save you that polisher time. :D
The problem is that the mounting holes are different. I have 2 and you have one. Let me check on that on tuesday and I will let you know. I will be needing them asap so I can polish them :D :D i will be a loooong day in the polishing room :cry: :cry: but somebodys gotta do it!!
396

[Oldsquirt]

The mounting holes for the steering arm and reverse cable bracket are the same! Steering arm you need bolts on at the top and the left side. This piece includes the trim cable mount. The reverse cable bracket uses the same three holes on the trim nozzle that your current setup uses.

[396_WAYS_TO_SPIT]

ok here are your pics.....
396
http://hometown.aol.com/CTC100M/nozzle1.jpg
http://hometown.aol.com/CTC100M/nozzle2.jpg
http://hometown.aol.com/CTC100M/nozzle3.jpg[/

[396_WAYS_TO_SPIT]

and a few more......
396
http://hometown.aol.com/CTC100M/PlaceTiller.jpg
http://hometown.aol.com/CTC100M/PlaceReverseGate.jpg
http://hometown.aol.com/CTC100M/PlaceCableBrkt.jpg

[396_WAYS_TO_SPIT]

Aww Now I c!!! I have the 2 holes on my (left and right) for the "e" pump steering and reverse! I am such an idiot. Ok I got it. I have to find my reverse bucket and I will be ready to ship. I forgot where I placed it. Its with my (up and down) nozzle so its not far. I will look for it tomorrow.
Michael

[Oldsquirt]

I knew you'd get it. Just had to look. :D I knew it would work because I had already talked to Place about it.
Just PM me your address and I'll ship the stuff tomorrow.