SPAMOLA 19' Eliminator Daytona

[franky]

1997 19' Eliminator Daytona, new back seat, freshly powdercoated (candy blue) hardware/rails, twin 22 gal fuel tanks, billet fuel valve, filters and ss lines, ss water lines, header valve at driver, pressure reg, oil cooler, billet remote filter, battery box/interstate/switch/cables, Autometer gauges, recall tach, MSD 7A box, Fresh MPD prepped pump, double bolted bowl and drop snout, race reverse bucket, wedge, A/B ss race prep impeller, the good shaft, flowed bowl, powder coated, shoe/grate/ride plate, OT Bassets JetHot coated, 3 auto bilge pumps, tandem trailer w/swing tongue. Set up for blown intercooled motor (pickup, strainer, dump, gauges), but would pull that stuff. Custom fit (like a glove) new cover. Ready to just drop in a motor $15K OBO. None nicer for the money.
tell a friend
pics on Image Center under Just Jets, Franky

[Bryan Rose]

But what about the kittens......

[franky]

Man I know, but I am just not a computer guy. If I e-mail you the pics, will you post?

[Bryan Rose]

Sure..... Artifactual@cox.net
Bryan

[Bense468]

Interesting....Just waiting for pics

[MudPumper]

Franky, I sent you a PM at about 6pm saying I would put up some pics for you. I guess when you say you are computer illiterate that means you don't know how to check PM's either. :wink: :D

[franky]

When I said I was not a computer guy it meant several things including that I don't just sit there evetry spare moment and stare at the monitor waiting for sh*t to respond to. :p
6:00 PM I was at the movies watching Sahara (disappointment) then on to Mudsharks for a couple pints.
Boy but there is some drama on the Sandbar about the channel closings.
I will e-mail pics today, thanks.

[franky]

Franky, I sent you a PM at about 6pm saying I would put up some pics for you. I guess when you say you are computer illiterate that means you don't know how to check PM's either. :wink: :D
Couldn't post pics, put on Image Center, Just Jets, under Franky
ALso thru one in of the Schiada :) :rolleyes:

[Cs19]

This thing is clapped out.
I dont know what that means, i just like to say it
http://www2.***boat.com/image_center/data/521/2622bilge.JPG
http://www2.***boat.com/image_center/data/521/2622cockpit_Out.JPG
http://www2.***boat.com/image_center/data/521/2622full_side.JPG
http://www2.***boat.com/image_center/data/521/2622pump_2.JPG

[Hustler]

WOW!! very nice boat. I wonder how it would run with about 1000 ponies :idea: :D

[hack job]

WOW!! very nice boat. I wonder how it would run with about 1000 ponies :idea: :D
i would say it would move pretty good :p nice boat

[MudPumper]

Anybody want to loan me 15g's??????? :devil: :rollside:

[HBjet]

Anybody want to loan me 15g's??????? :devil: :rollside:
What's Gina doing for the next couple of months? :devil: :)
HBjet

[MudPumper]

What's Gina doing for the next couple of months? :devil: :)
HBjet
I think she's getting a job as a stripper so she can support my habbit. :devil:

[franky]

WOW!! very nice boat. I wonder how it would run with about 1000 ponies :idea: :D
Hustler,well with 844 HP it scared the crap out of me,
CS19, funny boy,
Mudman, get the money, you need the boat.
hey, how about posting the pic of my Schiada for me

[MudPumper]

http://www2.***boat.com/image_center/data/521/2622schiada_-_oops_.JPG

[franky]

http://www2.***boat.com/image_center/data/521/2622schiada_-_oops_.JPG
I'm not a red guy but Damn, that's what I'm talking about.
CS19, this is the opposite of clapped out.

[jackpunx]

http://www2.***boat.com/image_center/data/521/2622schiada_-_oops_.JPG
Very nice.. very shiny... does it go? :D

[MudPumper]

It lives in Havasu. It belongs to Franky, I just put the pic up for him.

[jackpunx]

It lives in Havasu. It belongs to Franky, I just put the pic up for him.
Nice..very pretty..
looks like my buddies boat in the keys.. (joe)
btw.. We just got a house up in plum cyn .. Be moving up there june 10th

[hondajoey]

Couldn't post pics, put on Image Center, Just Jets, under Franky
ALso thru one in of the Schiada :) :rolleyes:
Franky
send me your number i would like to chat with you about your boat i am interested
Joel
Send me an email to Honda400007@aol.com
Thanks

[franky]

It lives in Havasu. It belongs to Franky, I just put the pic up for him.
Mudman, you could be here from SC by 5PM if you left now, nice day, maybe 100, slight breeze. I'm launchin (the Cole) within the hour. Seems like you have nothing else to do anyway.

[MudPumper]

Mudman, you could be here from SC by 5PM if you left now, nice day, maybe 100, slight breeze. I'm launchin (the Cole) within the hour. Seems like you have nothing else to do anyway.
Wish I could bro, but if I drove out there I would have to tow that Daytona home with me. :cry: Had to go back to work today at 13:30 anyway. :confused: Would much rather be on the lake though. :shift:

[Bense468]

Any more pics of the Shiada? That boat would look so bitchen capped.
How heavy is the layup on the daytona. Its got some thick stringers. Looks like a solid boat. Nice boat for someone for sure. Great lower parker cruiser.

[franky]

I will take more photos of the Schiada when I finish the exhaust and pull it out of the garage. It's a 1986 that's been completely gone through.

[Raskal]

WOW!! very nice boat. I wonder how it would run with about 1000 ponies :idea: :D
your motor would look killer in it thou

[franky]

Any more pics of the Shiada? That boat would look so bitchen capped.
How heavy is the layup on the daytona. Its got some thick stringers. Looks like a solid boat. Nice boat for someone for sure. Great lower parker cruiser.
Bense468, more pics of the Schiada in Image Center, Readers Rides, V-drives (sorry), Franky. Could you post for me.
Daytona is ready to go, pump work by Jack, just needs a motor, everything else is there. I am kinda re-thinking the selling thing, after putting so much into it to get it right. Might put a more docile mill in it and hang on to it just for BR and Parker.

[BigMo]

How well of a lake boat would this be? I boat at lakes with very mild chop would this type of boat work for that condition? Is it still for sale?
Mo

[franky]

I know my answer, but I may be biased. Someone else tell 'em.

[Cs19]

If its really just very mild chop, then yeah your good to go.

[BigMo]

If its really just very mild chop, then yeah your good to go.
Frankie you have PM. There may be a road trip from TX your way! LOL.
MO :rollside:

[Taylorman]

Franky,
What kind of exhaust do you have on the Shaida? I like your taste in boats. Nice rides.

[franky]

Franky,
What kind of exhaust do you have on the Shaida? I like your taste in boats. Nice rides.
CMI sport tube with Merc flanges, jacketed extensions that where extended about another 9" and then attached to (water dump) 5" x 16" IMCO Gatlins.

[Liberator TJ1984]

BigMo, as long as you don't get crazy and start jumpin' rollers like a jetski :idea: :D you otta be OK in that hull , I would imagine it is laid up about the same as the boat you got from Johhny down here or mine ???
Mine is about 600# bare , it's not bad till you get into over 1' of chop then I put her on the bank :D
Gopher

[BigMo]

Frankie you got Pm. thanks
Mo

[tahitijet]

http://www2.***boat.com/image_center/data/521/2622pump_2.JPG[/QUOTE]
What is the fitting and hose coming from the rideplate for?

[MudPumper]

Looks like a water pick up for an intercooler.

[franky]

Looks like a water pick up for an intercooler.
Exactly. Mudman, when you coming out this way? Are you sure you don't want this thing? Going, going, gone.

[MudPumper]

Exactly. Mudman, when you coming out this way? Are you sure you don't want this thing? Going, going, gone.
I don't know man, things are really crazy for me right now. I'll be able to disclose more info soon though but I got a lot of shit in the works right now. :crossx:

[franky]

ttt :D

[novaguy]

http://www2.***boat.com/image_center/data/521/2622bilge.JPG
Can someone tell me what the nice polished tube is after the water pressure regulator. I am running the same regulator and thinking about changing it out. The reason being, is that it contains a very small screen and if it gets clogged, bad things will happen to your motor :mad: like it did with mine. Anyhow, just wanted to know if it was some kind of larger screen or ??? I am thinking of changing it out to another type of regulator offered by Rex Marine that requires I cut out a hole in hull. I saw this, and was curious to what it was.
Thanks,
Rob

[Hustler]

Rob it's an oil cooler. Just pull the screen on your reg. and you should be fine, thats what did on mine. Also if you dont have a oil cooler talk to Dave about getting one.

[sanger rat]

Rob, That is a oil cooler.

[novaguy]

Thanks Joe...I thought it was an oil cooler, but in the pic it looks like it was connected to the water pressure regulator. You say talk to Dave about an oil cooler...how about talking to Dave about getting my motor back to me....I dropped it off in November and still haven't got it back :confused: . I hope I will be able to get it back soon. This boat has been nothing but a f*ckin headache!!! Are you running the same water pressure regulator as me? Supposedly, according to Dave, it was the main cause of my motor being messed up and he's the one who told me to put it on. Who knows....but I definately don't want it to hapen again, if it was.
Rob

[franky]

It is hooked up to the oil cooler. water from jet, to reg, to oil cooler, to motor.