Berkeley Pump Bowl [Archive]

james s

03-02-2001, 05:41 AM

Anybody know where I might be able to locate a used pump bowl for a JB/JG pump? Rebuilding mine, and found out last night that the shaft bearing runners are worn - shaft bearings won't fit. Pump does not need to be perfect outside, but must be in good shape inside. Any ideas or assistance would be appreciated.

spectras only

03-02-2001, 11:41 AM

Hi James, new JG bowl will run you US$ 575 at California Marine. Ph;604-278 1880.It comes with the bearing.

corkey 29

03-03-2001, 05:18 PM

Originally posted by james s:
Anybody know where I might be able to locate a used pump bowl for a JB/JG pump? Rebuilding mine, and found out last night that the shaft bearing runners are worn - shaft bearings won't fit. Pump does not need to be perfect outside, but must be in good shape inside. Any ideas or assistance would be appreciated.james,
I put a post for one on the real jet boat web site and I found one good used for 50 bucks all you need to do is ask around and you will find what you need.
corkey28

james s

03-04-2001, 08:01 AM

Thanks for the help guys. I called Cal Marine, and they're working on it. Thanks Spectra!!! Corkey, I'll check out real jet boats and see if I can find one as well. Got some other leads also, so thanks for all the help!!!

The Miller

03-07-2001, 08:54 PM

James, You should call CP Performance, They own Berkeley Jet Drive. They have new and used parts for pumps. 800-225-9871

ChetCapoli

03-09-2001, 12:39 PM

Hey James! I would call ted at CBM Enterprises (877)JET PUMP. He has alot of used parts for berkeley and sells new Aggressor parts. Best prices i have found for any jet stuff yet and i'm always lookin for a deal.
chet

Blown509

03-19-2001, 08:35 PM

Teds a Good Guy. He will be a good help. I would also Call MPD, Jack can fix your bowl.
Marine Performance Designs -Jack McClure jmcclure@pacbell.net
1760 Monrovia St. Unit A-7
Costa Mesa, Ca. 92627
(949) 631 - 2040
Good luck
MikeW

james s

03-21-2001, 05:05 AM

Thanks for all the help!!! I'll give them a call, see what I can dig up. I don't think my bowl can be fixed though, the aluminum was worn down were the bowl bearings go. Old shaft must have been getting beat up pretty bad inside!!!

MellowYelloW

04-08-2001, 03:35 PM

hey james, talk to Tom at www.jetboatperformance.com (http://www.jetboatperformance.com)

MellowYelloW

04-08-2001, 03:35 PM

hey james, talk to Tom at www.jetboatperformance.com (http://www.jetboatperformance.com)