*Spam* '84 Eliminator V-Drive

[Lake Ape]

I went to look at this boat this morning and thought I would try to help the guy out.
'84 Eliminator V-Drive (http://adcache.boattraderonline.com/6/7/9/78698179.htm)
The guy selling it is Steve Roberts of Primo Customs if that means anything to any of you. His number is (602) 996-1133.
http://www2.***boat.com/image_center/data/520/2219Picture_021-med.jpg http://www2.***boat.com/image_center/data/520/2219Picture_022-med.jpg http://www2.***boat.com/image_center/data/520/2219Picture_023-med.jpg http://www2.***boat.com/image_center/data/520/2219Picture_025-med.jpg http://www2.***boat.com/image_center/data/520/2219Picture_028-med.jpg
Fullsize Pictures (http://www2.***boat.com/image_center/showgallery.php?cat=500&si=&page=4&sort=7&perpage=12&password=&ppuser=2219&stype=)

[GofastRacer]

Clean piece!. :cool:

[Brian Ray]

The deck looks like mine....which is a '75.

[Lake Ape]

Yup, looks older than an '84 to me also, but what do I know. He said it's a Campbell mold bought by eliminator. I have never heard of this but like I said before, what do I know? A lot of glass work has been done to that boat. The rub rail has been deleted too.

[Brian Ray]

Yeah, I noticed the lack of rub rails too....I wonder whats the deal with two eye hooks up front?? Is that a light on the back of the boat just above the swim steps? I would assume with the amount of glass work done the HIN's are gone....

[dmontzsta]

My dads is a 79 and the deck is completely different, it is nice and flat, like most newer 21s you would see.

[deltarat]

The deck looks like mine....which is a '75.
Your right it is just like our hulls.

[Lake Ape]

The damn trailer was really impressive, he filled and smoothed the entire trailer.

[Lake Ape]

ttt

[Ex PSI Canyon]

I looked at his boat 3 weeks ago before I found the boat I currently own. For those of you in the know it needs a lot of work. Nice guy though. I thought it would be a good idea to alert somoene that might make the trip to know some things about that boat, the guy does'nt know alot about v-drives. If your interested Itcontact me I'll be happy to fill you in on what I found. It's located in Phx.

[GofastRacer]

I looked at his boat 3 weeks ago before I found the boat I currently own. For those of you in the know it needs a lot of work. Nice guy though. I thought it would be a good idea to alert somoene that might make the trip to know some things about that boat, the guy does'nt know alot about v-drives. If your interested Itcontact me I'll be happy to fill you in on what I found. It's located in Phx.
What kind of work does it need??, don't remember exactly when Hallcraft went out of business but it has all Hallcraft hardware on the back. If it's original it will give you an idea the latest it was built!.. :confused:

[Lake Ape]

I looked at his boat 3 weeks ago before I found the boat I currently own. For those of you in the know it needs a lot of work. Nice guy though. I thought it would be a good idea to alert somoene that might make the trip to know some things about that boat, the guy does'nt know alot about v-drives. If your interested Itcontact me I'll be happy to fill you in on what I found. It's located in Phx.
I was hoping that someone would say this. Since I don't know alot about boats I was hoping someone else would look at it and confirm what I thought. Very nice guy though.

[dmontzsta]

That really looks like an older Eliminator.
Here is the deck on my dads 78.
http://dmontzsta.werd.com/78Eliminator/Eliminator1.jpg

[bigkatboat]

If the chine at the nose is 'down' and then it notches up along the sides, it is a Taylor 21' Taylor made a round bottom 21' and a delta pad bottom 21'. I've rigged them both, (V drive) and they run OK.