PDA

View Full Version : stainless place diverter lines


advantage21
06-20-2005, 07:28 PM
who out there can tell me where i can get a set of custom lines made for my place diverter somewhere in the I.E. area all the kits are to short for my pump set up any help guys????
disco_charger
06-20-2005, 07:44 PM
Stainless hard lines or braided hose?
Dana Marine Products
06-20-2005, 07:47 PM
Dana Marine Products
http://www.danamarineproducts.com/store.cfm?CatId=247&group_id=32&CFID=118228&CFTOKEN=54463584
We'll build the lines what ever length you need.
advantage21
06-20-2005, 07:51 PM
do i just need to give you measurements and who do i need to talk to when i got em???
disco_charger
06-20-2005, 07:52 PM
For that stuff, call this guy.
http://www.sweetperformance.com/index.htm
He's Superdave 013 on the boards. He's cheaper than everyone and his stuff is super nice. He'll put them together for you for a nominal fee. His service is really good, and he's a hot boat guy too.
Dana Marine Products
06-20-2005, 08:02 PM
Give me a call @ 951-279-5005. Let me know if you need a kit or just the lines. Give me end to end measurements and will crimp them up. The kit @ 155.00 includes the billet bulkhead plate with stainless fittings, stainless cylinder fittings (90 deg.), inside fittings, and lines to your length specification. If you only need the lines you'll be looking at roughly $30.00 each. All stainless steel ends with teflon stainless braided hose. The names Bob.
advantage21
06-20-2005, 08:08 PM
yeah i need the whole kit inside and out i gotta get rid of that unreliable plastic stuff. i will get some measurements and give you a call. thanks bob ill give you a call in the next couple of days.
Dana Marine Products
06-20-2005, 08:15 PM
FYI - on a full stainless kit we need to include some inside lines and pump fittings, that kit will run roughly $210.00. Measure from the pump to the desired area to install the bulkhead as well as the outside lines so we can burn em down. Thanks!!!
sdpm
06-20-2005, 08:17 PM
Bob, check your pm's. Neil
Raskal
06-20-2005, 09:50 PM
see i told you the guys at dana marine are cool peeps .
victorfb
06-20-2005, 10:10 PM
place has a company called "cherry" make thier lines. they are located in corona near Tom Papp, Ultra boats, ect. in that buisness complex. Dave at sweet performance can probably hook you up with thier number and address. but it sounds like your hooked up with Dana marine, and im sure they can set you up. just thought id throw it out to ya.