blowing the bowl

[SummitKarl]

will a intake grate, help cure "slipping the pump" from a dead stop, I am told ba old jb pro-racer that every jet slips just before roll over to plane, will a scooping grate help stop that, my pump is tight and impeller is in good shape
it's a berkley jg (internal clean out) with a 460

[Squirtin Thunder]

Sounds like you may need an inducer to stop your problem. A loader will kind of block the water flow until you get up to speed.

[GUGS102]

Not sure About solving the slipping problem, but I have the exact falcon in yellow 64 H/T 302, aluminum GT-40 heads, comp hyd roller, air gap intake, C4 and posi 8". I feel a trip to havasu when it cools off coming on!!
But i'm not sure how well it'd pull the jet boat :smile:
Nice ride.

[SummitKarl]

Not sure About solving the slipping problem, but I have the exact falcon in yellow 64 H/T 302, aluminum GT-40 heads, comp hyd roller, air gap intake, C4 and posi 8". I feel a trip to havasu when it cools off coming on!!
But i'm not sure how well it'd pull the jet boat :smile:
Nice ride.
ver cool!!!!!!!!!always glad to meet a new Falcon bud, yup no a/c in mine so LD cruising ain't happening right now, I have been debating to go to the Falcon Nationals next week, I took home second place in 2000 then the following happened on the way home.
http://www2.***boat.com/image_center/data/520/2734crash64.jpg
head on at 50mph each way, I had to pull the heater controls out of my LEFT knee
got a donor body and built it back to the last detail
Full roller 347 all alu TrickFlow
super T5
Versallies 9" 3:89's and Auburn clutch less L/S carrier
4 wheel disk
TCP Rack N Pinion
1-1/8" front and 1" over the axil rear swaybars
magna suspension
17x7 front 17x8 rear rims
it turns on dime, and carries the front through 4th (I love it)
please visit my car club web site www.onesummernighthavasu.com and click on "movies and run pictures" then download my 4th gear start 135 mph burn out, it's 7meg so it takes a bit = "quicktime player" I am sure you will love it

[396_WAYS_TO_SPIT]

I agree with jim, an inducer preloads the pump. They really help with cavitation....
396

[SummitKarl]

Sounds like you may need an inducer to stop your problem. A loader will kind of block the water flow until you get up to speed.
please post pic if possiable so I know what I am looking for, Thanks

[SummitKarl]

bumped for gugs102