Looking for a BBC Tunnel ram setup

[USMC1812]

I am looking for a polished tunnel ram with dual carbs or a polished single carb tunnel ram that I can use the carb that I have now with. It will be going on a 502 with rectangular ports. Please include pics if you have them. I would like to get away from the airgap manifold and the 2" spacer, which sounded good at the time.
ddpinkerton@hotmail.com
Here's the motor.
http://free.***boat.net/ubb/Avatars/Gearhead_Garage/Motors_and_Drives/Engine2.JPG
Thanks,
Doug

[Hotcrusader76]

aka"78Eliminator" is selling his set-up. Two TPC 750cfm Billet Double pumpers and Dominator Holley Tunnel ram.
I think he wants around $2k. Here is a link to his thread.
http://free.***boat.net/ubb/ultimatebb.php?ubb=get_topic;f=5;t=001294
http://www.tpcracing.com/images_temp/DSC00002.jpg
http://free.***boat.net/ubb/Avatars/Forum_Graphic_Depot/DSC00810.JPG
[ February 17, 2003, 05:56 PM: Message edited by: Hotcrusader76 ]

[USMC1812]

Thanks!
That is a lot more than i can afford. Marines don't get paid that much!
Doug

[Cheyenne 572]

I have one with a pair of 660 center squirters for sale for $550.00.But you will have to rebuild the carb's they have been sitting around for awhile.Sorry no pic's.Later

[Cheyenne 572]

I have one with a pair of 660 center squirters for sale for $550.00.But you will have to rebuild the carb's they have been sitting around for awhile.Sorry no pic's.Later

[Jim Brock]

I have 2 weiand square port dual carb tunnel rams, one recent polish looks beautiful, $225.00 0ne old ploish needs elbow grease and semichrome $175.00 Jim Brock (818)890-1867 10am-6:30pm jbcyclone@aol.com

[Cheyenne 572]

Besides the 660 center squirter's i have two tunnelram's {1.TR2X eldebrock square port.
{2.TEAM G tunnelram square port.
If interested e-mail me or call 602-569-1576
Jim S

[78Eliminator]

USMC1812:
Thanks!
That is a lot more than i can afford. Marines don't get paid that much!
Doug What do you want to spend?

[miller19j]

http://www.tpcracing.com/images_temp/DSC00002.jpg
Hey Justin I don’t think that those flame arrestors are USCG approved anymore :D

[USMC1812]

I might be able to swing $600.00.

[Hotcrusader76]

pig_flyi

[USMC1812]

yeah, I know but you have to work with what you have!

[78Eliminator]

USMC1812:
yeah, I know but you have to work with what you have! Well, do you just want to make a deal on the tunnel ram maifold then?

[USMC1812]

That setup would be sweet, but not possible right now. I am looking for a complete polished setup for no more than $600.00. Thanks for the help man!
Doug

[vdrivenman]

USMC,
i have an eldebrock tr2 with 2 600 holleys,throttle linkage,2 fuel lines, and scoop for $400. the intake is not polished but was bead blasted this weekend. the carbs will need a
a rebuild. it is rect. port came off ls7 motor.
i can email u pic's.

[USMC1812]

thanks, ddpinkerton@hotmail.com

[USMC1812]

Cheyenne572, check your PM

[Cheyenne 572]

USMC1812 check your PM

[Cheyenne 572]

USMC do you want the intake and carb's?Please say either way {YES} or {NO}.Later
Jim S

[wfodude]

usmc check your pm's

[USMC1812]

I got one off of ebay, I am sure that I will have some questions about setting up the carbs once I get it.
Thanks,
Doug

[HBjet]

78Eliminator, why don't you just keep those carbs? Also, asking 2k for that setup tells me you don't really want to sell it.
For $1595 you can buy that tunnel ram new, and a pair of Da Vinci Competition Series 750DP's. Or, $1615 will get you that tunnel ram and a pair of 1050 Dominators. Or, $1127 will get you that tunnel ram and a pair of stock 750DP's.
Not trying to start shit, just think your asking too much for that setup. I'd say $1200 bucks for that setup would be a good deal.
Just my opinion!
HBjet