Berk bowl on a Dominator suction housing?

[BigBlockBaja]

Will it fit? Want to use the stuff off my other Pump which is all new and pretty. How about the Impeller?
Thanks...
Is it beer thirty yet? :umm:

[SmokinLowriderSS]

From the stuff I've seen on so many other posts, I THINK it will, but you'll need the berk impeller. Aparently there is a bowl interior size difference, Dominator being larger.
Best not take this one as gospel though and wait for someone who has done it. :shift:

[BigBlockBaja]

I want to use the harware in my aviator pic. Paging Duane from HTP!!

[kachina]

Well i put a dominator bowl on a burkley intake, but had to put a dominator impeller in because the dominator bowl is bigger. I will work the other way also. Burkley bowl is smaller so stick with the burkley impellar.

[sdba069]

If you use the Dom impeller with the Berk bowl, you'll need to machine the stuffer ring off the rear of the impeller, simple 10 minute operation. Or you can use a Berk impeller, but will probably need to change the wear ring in that case unless the Dom pump already has the 1" wear ring installed. Stock Dominator uses a 3/4" wear ring. Then the early Dom pumps were a whole nother deal with a smaller ID in the suction housing for the wear ring.

[kachina]

i thought i said that :wink:

[sdba069]

Well, you said something like that, which is okay.