Broken Throttle Baseplate Help!

[jrork]

Sorry to post on all these different boards but I'm doing my best to cover my bases.
Any thoughts would be very much appreciated
%#@!*&!
Just buttoned up the Holley 3310 and stuck it on. Tightened it a 1/4 too much and crack! Broke the ear off. Sometimes I can be such a dumba$$!
Anybody know if you can buy baseplates for a 750cfm, VacSec, single pump, list 3310-3?
Really don't want to buy a new carb as there is nothing wrong with this one.......okay, except for where I screwed up.
John

[GofastRacer]

Just take the plate off and get the ear welded back on, no biggie!..

[jrork]

Hmmm.....Gonna have to find somebody better than me at welding to attempt that.
I'll call around and see what I can find.......Thanks GF

[FASTRAT]

dont u think that carb is a little small for that 468c.i. mtr??...i would think u should be running at least a 850cfm!!...u can find alot of them really cheap...all u gotta do is look...just my .02 cents
fastrat

[GofastRacer]

Not for a low rpm stocker it isn't, that's a good all around carb!..

[sdba069]

Let me know if you don't come up with something, I should have several laying around. And remember, don't stack up gaskets and pull the carb bolts down slow and easy. snowman069@hotmail.com

[SUI-CY-COLE DIMARCO]

3310 is a nice all around carb..i agree

[blowngas]

give a look at these guys----pretty much cover all carb related stuff
http://www.aedperformance.com/index.htm