need a bbc block

[jdf]

well sunday was a bad day for me as the flattie had a major blow out and it wiped out the whole bottom end so now a i need a block to start over with let me know if one come's up around here in tx ..that is in great shape ... david

[BLOWN88FRESNO MINI]

I have 2 bare blocks but are in ca.

[INEEDAV]

well sunday was a bad day for me as the flattie had a major blow out and it wiped out the whole bottom end so now a i need a block to start over with let me know if one come's up around here in tx ..that is in great shape ... david
Not sure what you are going to spend in a bottom end, but it might be worthwhile to Talk to Infomaniac here on the boards, he is out of Tulsa.
Billy

[jdf]

i was think about that

[Shark In The Pond]

well sunday was a bad day for me as the flattie had a major blow out and it wiped out the whole bottom end so now a i need a block to start over with let me know if one come's up around here in tx ..that is in great shape ... david
Wow not good ,sorry to hear it !

[JasonSmith]

I have a 2 bolt block, needs a sleeve, 7 3/8 rods and a crank. $250 will buy it.
Jason
316-650-7796

[sdba069]

Hey David...... What happened to it??

[taylormanss]

what do you want a 2 bolt or a 4 bolt?I find parts all the time and I'm in The Great State Of Texas!!!!!!!!!!!

[jdf]

a rod broke

[jdf]

what do you want a 2 bolt or a 4 bolt?I find parts all the time and I'm in The Great State Of Texas!!!!!!!!!!!
4 bolt if you can find one

[sdba069]

Probably the result of some other failure.

[Liberator TJ1984]

jdf,
I got a fresh tall deck 427 .040 ??? :notam:
BTW, did the suit ship out ???

[taylormanss]

I'll talk to a couple guys down in Orange Grove.

[Liberator TJ1984]

JDF , call Randy Curtiss @ Randy's performance in C.C.Tx. @ 1-361-241-9786
he had 3 or 4 4bolt blocks last I talked to him , if you don't get him right away call back he's a Fireman and may have had to step out...

[jdf]

thanks tj will call later on this week

[Liberator TJ1984]

I sent ya my mobile # in the last PM , if he's got a block you want , call me and I can pick it up for ya ??? ( he's only 20 min. away ) I will be at Marble Falls next week ....save ya some shipping ??? :coffeycup

[jdf]

thanks tj will see what the wife will let me do now ??? she is so upset

[Liberator TJ1984]

I got a set of 7/16 dimple rods if you need them ?? you can have , just need to be checked , Randy was wanting a couple of hundred bucks for the blocks , let me call him first now that I think about it , he's the guy that built my motor , may get a deal.....his line is busy , will post again here in a sec.... :)

[jdf]

tj see what you can do ..the plae where i took the suit forgot too ship it cause it was not in their box so the shipping boy just push it aside sorry

[Liberator TJ1984]

you want the rods ??? I can give them to Garry at the races ????
Just called ...Randy is at the Firestation today and pulling a shift..he will be back in the shop tommorrow around 10 am....give him a call , nice dude , he'll work with ya ;)

[jdf]

well after looking things over it spun a rod bearing or the rod nut came loose and did it's do to thr rest of it #' 8 5 7 have crack's and the crank counter weights are beat to hell