Trailer axles

[jamessampica]

Ok guy's help me out here.I'm looking for a set of axles for my boat trailer.New or used will be fine.The measurement's are 87in. from hub to hub with a 2or3in. drop nad the bolt pattern is 5on41/2 for my rim's.The axles are made out of 2By2 square tubing.Any more inf. needed i can supply by e-mail.the old one's have seen there better day's.Oh yes they are on a Ellis mede trailer.Elis want's $500.00 per axle.{NOT!!!!}LATER
JIM S

[bp]

jimmy, try this link
http://www.etrailerpart.com/
they show 4" 3500lb dropped axles for a lot less, but don't know if they're long enough, or would fit your needs.

[73kona455]

jimmy, try this link
http://www.etrailerpart.com/
they show 4" 3500lb dropped axles for a lot less, but don't know if they're long enough, or would fit your needs.
i bought some trailer springs from them a few months ago .. and the service was great..

[GUGS102]

Try auto safety house on Buckeye/35th ave.
Good prices, they sell them without the spring pad mounts which saves 45-50 bucks each if you can weld. If not, try carson trailers, big tex etc. they carry axles or can point you in the right direction.
I replaced a 3500# axle on my box trailer for like $120 hub to hub.

[steelcomp]

I'll sell you a whole boat trailer for $500. Very good condition, had a Sanger flat on it.

[jamessampica]

Bp thank you for the help but they don't have the right one's.
GUG's i've aready check with them.But thank you for the reply.
Steelcomp i just need the the axles but i'd like to see some pic's of the trailer if you don't mind send them to me at Cheyenne580@mchsi.com.My Cheyenne might not fit it but it can be modified.LATER!!!!
Still looking come on guy's i need them or there's no CBBB for me!!!!!!!!
JIM S

[Jetmugg]

Jim:
Northern Tool (formerly Northern Hydraulics) has a great selection and super prices. I have used them before. Champion Trailers is also very good, but their pricing doesn't match Northern's. You may also want to try some of the heavy duty truck and trailer repair shops in your area. Although they specialize in HD stuff, a lot of them can get the axles, springs, etc. we use for our boats.
What's wrong with your existing axles?
SteveM.

[jamessampica]

Jetmugg my old axles have been cut for dolly axles and then pieced back together.And know they are bending in and rubing my inner fender support.Oh well it is 18 year's old.I can find all kind of axles but not the right drop for my trailer.Thank's for the reply.
STEELCOMP e-mail me those pic's if you want to sell.
JIM S

[steelcomp]

Jetmugg my old axles have been cut for dolly axles and then pieced back together.And know they are bending in and rubing my inner fender support.Oh well it is 18 year's old.I can find all kind of axles but not the right drop for my trailer.Thank's for the reply.
STEELCOMP e-mail me those pic's if you want to sell.
JIM S
Check PM's

[DeputyDawg]

Call these people http://www.axisproducts.com/axles35.htm their phone number is 574-266-8282. I got some axles from them and even after shipping them 1200 miles they were still cheaper and better built than what I could get locally. Got them in three days too.
Also give these folks a call https://www.usatrailerparts.com/index.html.
Really good prices here http://abctrailerparts.com/trailer-axles.html and usually have everything is stock.
Here is one more http://shop.easternmarine.com/index.cfm?fuseaction=catalog.catalog&categoryID=167 it looks like your axles would be $129.50 each from them.
Hope this helps. Good luck!

[UBFJ #454]

Jim -
When, by when do you and 'Da Cheyenne' Need to be on the road again?
Jak

[sleekcrafter]

I second Axis products, great customer service, and quick delivery! I bought new axle stubs, and welded them on, but they have it all.
http://www.axisproducts.com/axles35.htm