PDA

View Full Version : Jacuzzi WJ wear ring


oldbuck40
08-10-2005, 05:51 AM
ok guys who can tell me the clearances on the wear ring? when to replace it and so on....
crf311
08-10-2005, 06:05 AM
I need same info.
oldbuck40
08-10-2005, 06:20 AM
I need same info.whats your doing? mine seems to be slipping a little when i hammerdown on it,i let off then hit it again and its good
napabob
08-10-2005, 08:06 AM
ok guys who can tell me the clearances on the wear ring? when to replace it and so on....
I will take a look at the technical manual I have from NAMJ.
Will post tomorrow.
oldbuck40
08-10-2005, 08:15 AM
I will take a look at the technical manual I have from NAMJ.
Will post tomorrow.thanks napabob
moparjet
08-10-2005, 10:02 AM
I Just Rebuilt My Jacuzzi Wj....the Wear Ring Is Plastic....it Will Wear Its Own Clearance.....nothing Can Be Adjusted Anyway....just Put It In And Roll With It....helped Mine Pic Up 9mph
napabob
08-11-2005, 07:28 AM
ob40,
I put the question to Mr. Jason T. Hill of NAMJ regarding the plastic wear ring. Below is his response in quotation marks to your question and my question regarding availability of different types of material for the 12WJ wear ring. I have also purchased Kit #1 and I am in the process of purchasing Kit #2 to rebuild the extra Jacuzzi unit that I have.
"Robert,
The plastic wear rings will wear instead of the aluminum impeller, leaving the outside clearance of the aluminum impeller pretty much a standard size. So when time to replace plastic wear ring there is one size, the original size.
The only time Jacuzzi used stainless wear ring were with stainless steel impellers for race boat set ups.
The #2 seal kit is $92.00 plus shipping.
NAMJ does not take PayPal.
Master Card or Visa.
Best regards,
Jason"
I still have to look in the technical manual to see if replacement recommendations are cited for the plastic wear ring. The manual is still available from NAMJ (see message below).
We do have a repair manual available for the 12wj. It is not the best manual, but it gets the message across.
Cost $12.50
Best regards,
Jason T. Hill
North American Marine Jet
216 East Sevier St
Benton, AR 72015
Tel: 501-778-4151
Fax: 501-778-6381
Web site: www.marinejet.com
Email: jason@marinejet.com
napabob
08-18-2005, 08:27 AM
http://www2.***boat.com/image_center/data/500/1662JacuzziManual.jpg
This is a page from the Jacuzzi Technical Repair Manual.