PDA

View Full Version : SPAM-O-RAMA Who Has PARTS FOR SALE????



DansBlown73Nordic
08-16-2005, 03:45 PM
I thought a new Parts SWAP was in ORDER.....
http://www.spam.com/assets/ci/ci_a1.gif

DansBlown73Nordic
08-16-2005, 03:47 PM
427 396 BBC Forged Crank fresh turn .010 .010 $300
990 Sqaure port {HEAD} Needs repair stock valves, some port work. $100

dossangers
08-16-2005, 04:43 PM
new chrome 8''x67'' fender ???? :2purples: :2purples:

GofastRacer
08-16-2005, 06:08 PM
Dooley scoop like brand new for 4150 carbs, 9 3/8" centers fits Edelbrock Pro Ram!.. $150 + the ship!... :)
http://www.hotboatpics.com/pics/data/500/21Dooley_Scoop.jpg

Fiat48
08-16-2005, 07:43 PM
Well...I got:
A dry sump Hamburger aluminum pan. $200
A Stef's dry sump tank. $175
A couple 10/10 454 steel cranks. $200 ea
A racing powerglide with a transbrake complete. $1K
Another dry sump pan I dunno what it fits. ???
2 wet sump pans with extra baffling...suitable for a jet boat?
A set of Brodix solid aluminum heads with Jessel valve train complete. $3K
9" ford big pinion stuff if someone runs a drag car. ???

watergun4u
08-16-2005, 08:30 PM
i need a crank how much are you asking for it? email me at boatdawgo@aol.com

Hallett
08-16-2005, 08:56 PM
Hello Bob witch heads are they and what do you want for them.
this winter im looking to put a new motor together.
thanks. Hallett/ Bob.

Fiat48
08-16-2005, 09:24 PM
Gotcha covered on that email on the cranks.
And the heads are solid...as in no water...as in alcohol or fuel...BB4's with a lot of work. $3K with Jessel.

Hallett
08-17-2005, 02:35 AM
Gotcha covered on that email on the cranks.
And the heads are solid...as in no water...as in alcohol or fuel...BB4's with a lot of work. $3K with Jessel.
Thanks Bob i will see if you have them when i decide
witch way im going to go with the motor.

steve d
08-17-2005, 08:20 AM
Well...I got:
A dry sump Hamburger aluminum pan. $200
A Stef's dry sump tank. $175
A couple 10/10 454 steel cranks. $200 ea
A racing powerglide with a transbrake complete. $1K
Another dry sump pan I dunno what it fits. ???
2 wet sump pans with extra baffling...suitable for a jet boat?
A set of Brodix solid aluminum heads with Jessel valve train complete. $3K
9" ford big pinion stuff if someone runs a drag car. ???
Bob, what are the wet sump pans--looking for Aviaid or dooley 14qt jet-Steve

Winfab
08-17-2005, 02:49 PM
Sanger Bubble Deck, 454 with 2 - 4's on tunnel ram. $4500. E-mail winterlynn@charter.net for info. Can get pics.

Fiat48
08-17-2005, 05:48 PM
The pans are Milodon and for drag cars. But I see no reason why they would not work on Jet's as the motor faces the correct way. Rear sump pans.

GofastRacer
08-17-2005, 07:23 PM
Bob, what are the wet sump pans--looking for Aviaid or dooley 14qt jet-Steve
Steve, stick with the Aviaid for a circle boat!.. :smile:

GofastRacer
08-17-2005, 07:26 PM
Anybody got a 6" min steering post they want to part with, need one for the Nordic!.. :smile:

MikeF
08-17-2005, 07:50 PM
Steve, stick with the Aviaid for a circle boat!.. :smile:
Anyone have a pic of the inside of an Aviaid pan? SSMike.....?! :shift:

GofastRacer
08-17-2005, 08:06 PM
I have one buried, I'll dig it out in the morning if nobody else has one handy!.

Jet City
08-17-2005, 08:09 PM
Well...I got:
A dry sump Hamburger aluminum pan. $200
A Stef's dry sump tank. $175
A couple 10/10 454 steel cranks. $200 ea
A racing powerglide with a transbrake complete. $1K
Another dry sump pan I dunno what it fits. ???
2 wet sump pans with extra baffling...suitable for a jet boat?
A set of Brodix solid aluminum heads with Jessel valve train complete. $3K
9" ford big pinion stuff if someone runs a drag car. ???
What kinda 9" Ford stuff have you got?

Big Proppa
08-17-2005, 08:13 PM
10 degree casale with 18's in the box - 500
1970 Hondo Hull ready for paint on a decent trailer - 500
or get it all for 800
I need a motor - chevy or chrysler
fiber glass or carbon fiber bucket seats / with mounts
steering column and wheel
trailer fenders
Cav plate assembly with handle for a t-deck hondo
and whatever else you think I might need to put a t-deck back together
Bill
(951) 712-3290

MikeF
08-17-2005, 08:19 PM
I have one buried, I'll dig it out in the morning if nobody else has one handy!.
Thanx Art. :cool: Interested in the differences in operation. :boxed:

GofastRacer
08-17-2005, 08:41 PM
Thanx Art. :cool: Interested in the differences in operation. :boxed:
Here ya go Mike, wasn't buried after all. There's a trap door on all sides of the sump, oil is directed to the sump no matter what the condition!..
http://www.hotboatpics.com/pics/data/500/21Aviaid.jpg

MikeF
08-17-2005, 09:01 PM
Looks much different. Is that a spec (ss) circle boat pan? The pickup goes in the box in the center/right?

GofastRacer
08-18-2005, 06:04 AM
Looks much different. Is that a spec (ss) circle boat pan? The pickup goes in the box in the center/right?
Yep, that is the sump and it has a trap door on all sides leading into it, you're always going to have oil there!..

steve d
08-18-2005, 07:50 AM
Steve, stick with the Aviaid for a circle boat!.. :smile:
Got it...Thanks Art

steve d
08-18-2005, 07:53 AM
Yep, that is the sump and it has a trap door on all sides leading into it, you're always going to have oil there!..
NOW WE'RE TALKIN!-----STEVE

Sangster
08-18-2005, 12:14 PM
http://www.planetsmilies.com/smilies/sign/sign0073.gif

DansBlown73Nordic
09-04-2005, 05:37 PM
Ttt

Norseman
09-04-2005, 06:08 PM
Well...I got:
A dry sump Hamburger aluminum pan. $200
A Stef's dry sump tank. $175
A couple 10/10 454 steel cranks. $200 ea
A racing powerglide with a transbrake complete. $1K
Another dry sump pan I dunno what it fits. ???
2 wet sump pans with extra baffling...suitable for a jet boat?
A set of Brodix solid aluminum heads with Jessel valve train complete. $3K
9" ford big pinion stuff if someone runs a drag car. ???
Bob;
What's the Ford rearend stuff you have and how much????
Looking for a center section and GOOD axles that I can have cut down.
Bob

ssmike
09-06-2005, 01:20 PM
Yep, that is the sump and it has a trap door on all sides leading into it, you're always going to have oil there!..
Art:
I noticed that Aviad makes 9, 12, 10, and 14 quart pans...is that right?
BTW, which one's in the photo?
I have an Aviad on the Maiden and am not sure of the capacity
:D

olbiezer
09-06-2005, 01:29 PM
don zig ext coil mag cheep........200 plust shipping this mag needs a new home baddly lol its for a bbc of coursehttp://www2.***boat.com/image_center/data/500/1789P1010007.JPG

INEEDAV
09-06-2005, 05:11 PM
don zig ext coil mag cheep........200 plust shipping this mag needs a new home baddly lol its for a bbc of coursehttp://www2.***boat.com/image_center/data/500/1789P1010007.JPG
Does it have the advance components in it or is it locked?

Fiat48
09-06-2005, 05:17 PM
Bob;
What's the Ford rearend stuff you have and how much????
Looking for a center section and GOOD axles that I can have cut down.
Bob
All of it is 9 inch pro stuff. No housings. No axles. Just some gears, many new bearings, seals and stuff like that. All big pinion soft gears for drag racing. Won't live on the street.

Floored
09-06-2005, 06:02 PM
I ended up with a 65 Chris Craft 33 ft with twin 283's and someone put HEI's on it and I need a couple rebuildable tach drive marine distributors, didn't they use the Prestolite or Mallory on those. Darned thing is wood so I want to avoid explosions, I'm kinda funny that way. Thanks

steelcomp
09-06-2005, 07:03 PM
Polished Weiand tunnel ram, port-matched to above heads with dual 4150 top. This is the Super Pro Ram, not the one they sell now. Also have 4500 top.
$175.00, $225.00 with both tops.
Dooley 10 qt. oil pan, rear pick-up, trap doors, windage tray, pick-up included. BB Chev, MkIV.
$200.00
ARP Main studs, BB Chev, four bolt with extended studs for windage tray. Perfect condition.
$75.00
Holley 4780 850 DP carbs, choke horn milled, no other mods. Need fresh kits. Have two.
$200 ea. Will rebuild for $100 ea.
Racer Brown STX31 flat tappet solid cam for BB Chev, used, with Comp solid lifters in correct order. Cam has less that 10 hrs. Properly broken in. Specs are .610/.610 net lift w/ 1.75 rockers, duration is 266/264 @ .05, 312/307 @ .014. Lash .014/.016.
This is an excellent flat tappet cam for a hard runing BB Chev. Needs compression, and good exhaust.
$200.00
Stock length after market 3/8 pushrods, BB Chev, used complete set, good condition.
$75.00
Dart TR, 9.800 BB Chev, minimum port matching, dominator top. Excellent condition.
$500.00
MSD 8580 Pro Billet 429/460 Ford, excellent cond, needs gear. Comes w/ MSD 8.5mm Superconductor wires.
$175.00
NEW...MSD 85551 Pro Billet BB/SB Chev...in box. $195.00
NEW..Manley 11802 Severe Duty intake valves 2.25 X 11/32 stock length BB Chev. (5.244") w/ 28 deg. back cut. Set of 8.
$125.00
NEW..Manley 11815 Severe Duty Ex. valves 1.88 X 11/32 +.100 long BB Chev.(5.522")
Set of 8
$125.00
NEW..Import one piece stainless intake valves 2.25 X 3/8 stock length BB Chev.
$75.00
NEW..Comp Products Import severe duty ex. valves 1.88 X 11/32 stock length BB Chev. Comparable to Manley severe duty.
$100.00
NEW..Lunati 50226 solid roller cam, still in box. Lift .722/.722 w/1.70 rocker
Duration 272/280 @ .050 110 LSA, lash .028/.030.
$225.00
NEW...Howard "Congo" roller valve springs 1.550". 230 lbs @ 1.88, 650 @ 1.15, CB @ 1.08. Good for .700" lift. Will work with above cam.
$175.00
I have more stuff, just tired of typing.
PM if interested in anything. Willing to consider any reasonable offer.

PGF500
09-07-2005, 03:02 PM
BBC Bow Tie block, new never been cut. $2000 obo
BBC 3.68 stroke Crankshaft Specialties crank w/ 2.1 rod journals. $300.
Super Mag 2 with coil. $200
Mallary High Fire 7 ignition with coils. $300
BBC V-drive oil (I believe its a Milidon) $100
BBC very new Steffs 4 stage dry sump pan. $400
Mallary dual 500 fuel pump with 4 port regulator. $200
Kaase safety capsule. $3600
Lots of new and used flat bottom hardware.
Cole Thurston
714-310-2932

steelcomp
09-09-2005, 05:52 AM
bumpin it up :cool:

david_396
09-11-2005, 08:26 PM
ttt

Squirtin Thunder
09-11-2005, 09:40 PM
http://www2.***boat.com/image_center/data/500/191Picture_010.jpg
BBC Motor Plates for V-drive & Jet $200.00 ea
http://www2.***boat.com/image_center/data/500/191Picture_011.jpg
Dual Carb scoop 10" center $100.00
http://www2.***boat.com/image_center/data/500/191Picture_014.jpg
BBC...10114182...454.......91-up...4-bolt, Gen.V $300.00
http://www2.***boat.com/image_center/data/500/191Picture_019-med.jpg
BBC stock rods & Pistons $100.00 O.B.O
http://www2.***boat.com/image_center/data/500/191Picture_021-med.jpg
BBC 346236.....75-87...oval...OPEN...454, 120cc chamber, 225/116cc ports $100.00 O.B.O
http://www2.***boat.com/image_center/data/500/191Picture_022-med.jpg
BBC Gen5 oil pan, windage tray, timing cover $50.00
Standard chrome timing cover $10.00
http://www2.***boat.com/image_center/data/500/191Picture_024-med.jpg
BBC dist. mercrusier, Mallory unilite,1 mechanical and 1 vac. advance $50.00 ea
accel coil $10.00
Mallory 110 Marine fuel pump $25.00
All electical parts worked when I took them out of my friends boats
Do you still have the block ???
If so Tim Demerit is looking for one.
http://www2.***boat.com/image_center/data/500/191Picture_014.jpg

AJ
09-12-2005, 02:02 PM
[QUOTE=Squirtin Thunder]Do you still have the block ???
If so Tim Demerit is looking for one.
I still have the block, Is this his screen name? Do you have his phone# so i can give him a call. Thx
Sold

FOURQ
09-12-2005, 03:05 PM
large 44 lifeline jacket $350.00 needs recert in good condition just a little dusty
http://clmracing.com/jacket3.JPG
http://clmracing.com/jacket1.JPG
http://clmracing.com/jacket2.JPG

Norseman
09-12-2005, 03:31 PM
All of it is 9 inch pro stuff. No housings. No axles. Just some gears, many new bearings, seals and stuff like that. All big pinion soft gears for drag racing. Won't live on the street.
Bob;
Thanks!!
Bob.

waterloged
09-12-2005, 03:36 PM
Where's all the big block ford parts?? Of course for a v-drive!

GofastRacer
09-12-2005, 07:10 PM
Art:
I noticed that Aviad makes 9, 12, 10, and 14 quart pans...is that right?
BTW, which one's in the photo?
I have an Aviad on the Maiden and am not sure of the capacity
:D
Mike, yes they do make 4 different capacity pans, at least they used to??. The one you have is probably a 12 quart same is the one I had back then it was the norm, and the one in the pic should be the same as you have!...

steelcomp
09-19-2005, 02:23 PM
Bumpin it up. Come on guys, there's some good deals here. :D

Dave Sammons
09-20-2005, 05:51 PM
Prices lowered... :D
Check your PM's. ;) ;)

AJ
09-20-2005, 07:42 PM
Check your PM's. ;) ;)
Thanks :smile:

Norseman
12-02-2005, 01:48 PM
:rollside: :rollside: :rollside:

steelcomp
12-03-2005, 01:36 PM
Well...I got:
A dry sump Hamburger aluminum pan. $200
A Stef's dry sump tank. $175
A couple 10/10 454 steel cranks. $200 ea
A racing powerglide with a transbrake complete. $1K
Another dry sump pan I dunno what it fits. ???
2 wet sump pans with extra baffling...suitable for a jet boat?
A set of Brodix solid aluminum heads with Jessel valve train complete. $3K
9" ford big pinion stuff if someone runs a drag car. ???
Ya wanna throw in a bent Edelbrock TR? I'll ship it for ya. :rolleyes:

Tahiti350
12-03-2005, 01:56 PM
10 degree casale with 18's in the box - 500
1970 Hondo Hull ready for paint on a decent trailer - 500
or get it all for 800
I need a motor - chevy or chrysler
fiber glass or carbon fiber bucket seats / with mounts
steering column and wheel
trailer fenders
Cav plate assembly with handle for a t-deck hondo
and whatever else you think I might need to put a t-deck back together
Bill
(951) 712-3290
Complete running 440 Chryler out of 75 Dodge truck, oil press 10 psi hot idle, 55-60 at 45 mph. $250

Tahiti350
12-03-2005, 02:03 PM
Trim tab assy off of (i believe) a mid 60's Sanger Dragster flat bottom. Not pedal operated, but has adjustable links. Thick Aluminum peice, needs cleanup, one adjuster mount bolt broken off in mount (hull mount). I have the SS hardwarea dn the other mount pad. I know it needs work, but what's it worth?
http://www.***boat.com/image_center/data/500/2266tab.JPG
http://www.***boat.com/image_center/data/500/2266tab2.JPG
Thru hull exhaust bells, also off the old Flattie, aluminum, decent shape Best offer?
http://www.***boat.com/image_center/data/500/2266tips.JPG

CircleJerk
12-07-2005, 10:24 AM
1974 Lavey Craft circle boat $4500 less bbc. PM for pictures

beaverfab
12-07-2005, 10:46 AM
JURK SAY IT AN'T SO. j.j.

Moneypitt
12-07-2005, 11:06 AM
Wanted: MK IV BBC 4 bolt main block that will clean at +.060.....Reasonable, in the So Cal or BHC areas......................MP

lilrick
12-07-2005, 01:00 PM
Wanted: MK IV BBC 4 bolt main block that will clean at +.060.....Reasonable, in the So Cal or BHC areas......................MP
I think $400.00 seems to be about the going rate.

Moneypitt
12-07-2005, 02:42 PM
So, who's got one? At $400. I would at least check it out.............Ray