PDA

View Full Version : SPAM: Want to buy 30p cleavers for 300X


F26
08-18-2005, 07:51 AM
has anyone run these on a 26 DCB for heavy load weekends?
mbrown2
08-18-2005, 07:59 AM
3 or 4 blade? I have run 30" 3 blade and they are the best for my boat...Open Bow F26...
F26
08-18-2005, 08:21 AM
Bryan at DCB recommended 4 blade labs
lately i have had around 6-8 peoples, gear, chests, etc in a F26 and it doesnt want to break over! running 34 lab 3 and 4b cleavers now
the_gray_goose
08-18-2005, 08:45 AM
Bryan at DCB recommended 4 blade labs
lately i have had around 6-8 peoples, gear, chests, etc in a F26 and it doesnt want to break over! running 34 lab 3 and 4b cleavers now
What RPM's are you getting out of the 34's?
XFactor
08-18-2005, 08:59 AM
28 lab lightining et's work great with a load. I have 30 3 bladed cleavers and the et's are better in heat and under load.
Screaming Pete
08-18-2005, 09:01 AM
Have you tried running some AV gas, in the heat of summer making HP is tuffer on the Wackers it seams to help me some, i just run about 20-25% but when in havasu its cheap at the pump compaired to lower river $
mbrown2
08-18-2005, 09:45 AM
Bryan at DCB recommended 4 blade labs
lately i have had around 6-8 peoples, gear, chests, etc in a F26 and it doesnt want to break over! running 34 lab 3 and 4b cleavers now
For a closed bow, stay with the four blade...they help with the stern lift...the three blades help with bow lift and I need it with the OB. If you are turning 34's with light loads; you might get on plane with a 32, but it won't be the most responsive prop with load....I would try a 30 and then 28....28 is going to be very responsive.
F26
08-18-2005, 01:53 PM
What RPM's are you getting out of the 34's?
with 2 people and under half tank 64-6600rpm with 3b 34p merc cleavs
Screaming Pete
08-18-2005, 02:09 PM
My buddy still has those 4 blade brovo 1's 30"s lab'd for 1K with holes
jackpunx
08-18-2005, 02:18 PM
any of you guys have an ET 28 laying around that I can try?
the_gray_goose
08-18-2005, 04:10 PM
My buddy still has those 4 blade brovo 1's 30"s lab'd for 1K with holes
I think I asked before but, are they big shafts? for 300x
Kilrtoy
08-18-2005, 06:00 PM
I have 30's and really like the way they run...
The other day when the heat 125 plus, I had two full tanks, 4 full ice chest and 6 people with a easy up and 6 lawn chairs.... It was work to get her over, but it still ran 96 in the heat..
they are 4 blade 14 1/2 X 30 clevers.... I think they are very good all around props...
Burley1
08-19-2005, 07:30 AM
any of you guys have an ET 28 laying around that I can try?
I'll have a new one you can try as soon as Stoker get's them in
HavasuDreamin'
08-19-2005, 11:19 AM
Just curious what gears are they putting in the Lower Units of the 300X's? 1.75 or 1.62?
jackpunx
08-19-2005, 11:24 AM
I'll have a new one you can try as soon as Stoker get's them in
cool..
you coming to parker for the regatta?
Reaper1
08-19-2005, 11:45 AM
I had two full tanks, 4 full ice chest and 6 people with a easy up and 6 lawn chairs....
Jeez Kilr! You might have to start thinking about a deck boat. :idea: :D :rollside:
the_gray_goose
08-19-2005, 11:56 AM
Just curious what gears are they putting in the Lower Units of the 300X's? 1.75 or 1.62?
mine have 1:62 in them. sportmaster lowers.
Screaming Pete
08-19-2005, 01:35 PM
I think I asked before but, are they big shafts? for 300x
the hubs he has are small shaft but can be replaced,when i first got my 300 i had the smal shaft and when i blew my lower i upgraded to the new fatter shaft and just got the hub kit at dcb, knock 1 out, put the new one in. that $ is for the pair