A few Pics from Prime

[Highlimit9000]

Boat on Stand
http://www2.***boat.com/image_center/data/524/199SchiadaPrime.JPG
Rigging Cav Plates
http://www2.***boat.com/image_center/data/524/199Schiadaprime2.JPG
Bottom rear half all Blue Printed and Speed Coated
http://www2.***boat.com/image_center/data/524/199Schiadaprime3.JPG
Wash Plate Routed
http://www2.***boat.com/image_center/data/524/199Schiadaprime8.JPG
Filled 3 pick-up holes I left for Force Feed. All water Inlets will be off of Plates
http://www2.***boat.com/image_center/data/524/199Schiadaprime4.JPG
More Pics to Come. Boat is starting to come Along!
http://www2.***boat.com/image_center/data/524/199Schiadaprime5.JPG

[dmontzsta]

Bitchen! Looks like it was just built yesterday. :)

[63stevens]

Speaking of cav plate length. What is the rule of thumb for length?

[Highlimit9000]

LOOKS GOOD !! One qusetion, how did you determine the width of your cav plates ? they look kinda small for the 22, most of the new 21's are about 13" wide from the back of the transom, plus the 3" under the transom ? Just curious.
Scott.
Scott, I just had a replica made from the ones that were originally on boat. I believe these are 10" from transom. 13.5" Total. Not sure if I should have Gone bigger or not. Mike King didnt say anything about being too small...Unk?

[Highlimit9000]

Scott, I just had a replica made from the ones that were originally on boat. I believe these are 10" from transom. 13.5" Total. Not sure I should have gone bigger or not. Mike King didnt say anything about being too small...He knows these set-ups pretty well Unk? Superdave How long are your Plates?

[Highlimit9000]

Speaking of cav plate length. What is the rule of thumb for length?
SpectraBrent or Dave Sammons Any good rule for that?

[haulina29]

Corleone There is probably nobody at Schiada that could tell you why the plates are 13 inches long im guessing probably the real reason is Billy Dunsmore put them on Suddenly 20 years ago when he ran outboard steering and it seemed to work . Of all the Schiadas that were built for ski racing Mike Kings were by far in a league of there own . If Mikes doin the work it will be right . H29 :rolleyes:

[obnoxious001]

Corleone There is probably nobody at Schiada that could tell you why the plates are 13 inches long im guessing probably the real reason is Billy Dunsmore put them on Suddenly 20 years ago when he ran outboard steering and it seemed to work . Of all the Schiadas that were built for ski racing Mike Kings were by far in a league of there own . If Mikes doin the work it will be right . H29 :rolleyes:
Right, if Mike King made them that length, they will work.

[sixgunsam]

corleone17, next time your there, ask them how much for that Sanger bubbledeck next to your boat.thanks....by the way, your boat looks to be coming along nicely. :D

[GofastRacer]

It's looking great so far!.. :cool: :cool:

[SPECTRABRENT]

SpectraBrent or Dave Sammons Any good rule for that?
I have no clue what the lenght of the plates are on my boat. I would guess at least 13-13.5 inches, they stick pretty far out from the transom.
Brent

[superdave013]

Superdave How long are your Plates?
Oh heck I donno. I can measure then when I get home. They are old skool schiada plates and are not as long as what I see on the new 21's. But I don't have a 21' so I didn't sweat it.