PDA

View Full Version : Trade or sell these controlls???


FREIND OF AA AND TA
10-06-2005, 07:52 PM
I need the ones with the bend. These are too close to my seat. I paid over a grand for them. Anyone in need?http://www2.***boat.com/image_center/data/500/1721Picture_083.jpg
Bad Baja
10-06-2005, 08:39 PM
From What I Understand chicks dig the bent ones too! :D
BadKachina
10-06-2005, 08:45 PM
Are they Livorsi or EMI? Either way I can probably order new arms. If you can put them together it should be no problem. If not I can put them together for you.
INSman
10-06-2005, 08:46 PM
They look like the Livorsi's, I have the exact same one's !! :D
p.s. They are very nice and have a great feel
BadKachina
10-06-2005, 08:51 PM
They look like the Livorsi's, I have the exact same one's !! :D
p.s. They are very nice and have a great feel
So do I but the EMI are made by the same company in Canada. the EMI's are about a hunded dollars cheaper and are identical except for the holes in the arms. One has an oval hole the other has an oval hole that is at an angle.
INSman
10-06-2005, 10:45 PM
Livorsi may have better insurance if you need to sue them :220v: :D
faster
10-06-2005, 10:52 PM
I need the ones with the bend. These are too close to my seat. I paid over a grand for them. Anyone in need?http://www2.***boat.com/image_center/data/500/1721Picture_083.jpg
Not positive But I'm pretty sure you can turn the handles around so they bend to the forward side. That'd save a few bucks and some hassle.
check it out before you make a deal!!!
FREIND OF AA AND TA
10-07-2005, 08:42 AM
Not positive But I'm pretty sure you can turn the handles around so they bend to the forward side. That'd save a few bucks and some hassle.
check it out before you make a deal!!!
Switch would be on the wrong side and the position would feel weird on your hands I would think.
FREIND OF AA AND TA
10-07-2005, 08:44 AM
Are they Livorsi or EMI? Either way I can probably order new arms. If you can put them together it should be no problem. If not I can put them together for you.
They are Livorsi, I will call them to see about the change. Thanks! Where do you work?
FREIND OF AA AND TA
10-07-2005, 08:56 AM
The new arms are $800 screw that! Someone trade me!!
BadKachina
10-07-2005, 01:55 PM
The new arms are $800 screw that! Someone trade me!!
Let me see what my cost on them are, how about just changing the foward can't on the throttles? Would that work for you?
FREIND OF AA AND TA
10-07-2005, 05:39 PM
not enough adjustment
BadKachina
10-08-2005, 07:29 AM
You were right, that they are expensive. Distributer cost, that's my cost, is 636.00 for the throttles and the shifters, if you just put the foward can't on the shifters you are looking at 438 bucks. That would be my cost like I said, I think you paid enough for them already and I'm not trying to make a buck off you. If you need me to switch them out for you I can do that too as long as you pay the shipping.
Give me a call if you are interested,
Paul Gooding
Outdrive Exchange & Performance Marine
1-866-outdriv
faster
10-08-2005, 08:21 AM
Switch would be on the wrong side and the position would feel weird on your hands I would think.
I'm pretty sure the switch will move also, and yeah it might feel wierd at first but you'd probably get used to it.
Good luck with it either way.