SPAM...good stuff for sale

[steelcomp]

Polished Weiand tunnel ram, port-matched to above heads with dual 4150 top. This is the Super Pro Ram, not the one they sell now. Also have 4500 top.
$175.00, $225.00 with both tops.
Dooley 10 qt. oil pan, rear pick-up, trap doors, windage tray, pick-up included. BB Chev, MkIV.
$200.00
ARP Main studs, BB Chev, four bolt with extended studs for windage tray. Perfect condition.
$75.00
Holley 4780 800 DP carbs, choke horn milled, no other mods. Need fresh kits. Have two.
$200 ea. Will rebuild for $100 ea.
Racer Brown STX31 flat tappet solid cam for BB Chev, used, with Comp solid lifters in correct order. Cam has less that 10 hrs. Properly broken in. Specs are .610/.610 net lift w/ 1.75 rockers, duration is 266/264 @ .05, 312/307 @ .014. Lash .014/.016.
This is an excellent flat tappet cam for a hard runing BB Chev. Needs compression, and good exhaust.
$200.00
Stock length after market 3/8 pushrods, BB Chev, used complete set, good condition.
$75.00
Dart TR, 9.800 BB Chev, minimum port matching, dominator top. Excellent condition.
$500.00
NEW...MSD 85551 Pro Billet BB/SB Chev...in box. $195.00
NEW..Manley 11802 Severe Duty intake valves 2.25 X 11/32 stock length BB Chev. (5.244") w/ 28 deg. back cut. Set of 8.
$125.00
NEW..Manley 11815 Severe Duty Ex. valves 1.88 X 11/32 +.100 long BB Chev.(5.522")
Set of 8
$125.00
NEW..Import one piece stainless intake valves 2.25 X 3/8 stock length BB Chev.
$75.00
NEW..Comp Products Import severe duty ex. valves 1.88 X 11/32 stock length BB Chev. Comparable to Manley severe duty.
$100.00
NEW..Lunati 50226 solid roller cam, still in box. Lift .722/.722 w/1.70 rocker
Duration 272/280 @ .050 110 LSA, lash .028/.030.
$225.00
NEW...Howard "Congo" roller valve springs 1.550". 230 lbs @ 1.88, 650 @ 1.15, CB @ 1.08. Good for .700" lift. Will work with above cam.
$175.00
I have more stuff, just tired of typing. I can provide pics on request.
PM if interested in anything. Willing to consider any reasonable offer.

[LeE ss13]

4780 is an 800 cfm. 4781 is an 850. I know the air horns are cut off, but what are the numbers on the bottom of the throttle plates?

[steelcomp]

4780 is an 800 cfm. 4781 is an 850. I know the air horns are cut off, but what are the numbers on the bottom of the throttle plates?
You're right, Lee...thanks. Typo...they're 800's. One is a 4780-1, and the other was a -2, that I made a -1. They're matched,. mechanically.
Appreciate it...I'll make the correction. :D
Now isn't there something on this list you need?

[wsuwrhr]

You said good stuff?
:rollside: :rollside:
Where are the Dodge parts?

[steelcomp]

You said good stuff?
:rollside: :rollside:
Where are the Dodge parts?
Sorry, don't have any Dodge parts, just good stuff. :yuk: :D

[Boy Named Sue]

Sorry, don't have any Dodge parts, just good stuff. :yuk: :D
Don't you want to get rid of that pile of torn screen doors you got behind the trailer, under the old bike frames next to the worn out retreads? :idea:
Suuuuuuuuuuuuueeeeeeeeeeeeey!

[steelcomp]

WTF...you followin me around??? :idea:
You must be lookin under your porch. :D
Go to sleep, Sue. :sleeping: If'n yer aint gonna buy enythin, then jes move alawng. Gow own, git!

[Boy Named Sue]

WTF...you followin me around??? :idea:
You must be lookin under your porch. :D
Go to sleep, Sue. :sleeping: If'n yer aint gonna buy enythin, then jes move alawng. Gow own, git!
Following you? I just went lookin to see where the smell was coming from. :D
Why don't you just pile all the crap in the front yard, (unless thats were its always piled) and have a sale. The stuff you don't sell that day you can just leave it out there and the tweakers will get it.
SPAM Dunk!