PDA

View Full Version : stuff for sale come on post what you got


wideopen545
10-10-2005, 04:26 PM
i have two 80A-1-R pumps fresh from enderle new bearings and seals with flow tags CAM DRIVE 250.00 each
a new enderle timing cover with enderle coupler its magnesum has water ports not yet drilled all new 150.00
and also have a barry grant 280 hr pump fresh new bearings and seal kit 175.00
two four blower top 4500 ser inline or sideways 125.00
mooneyham bbc blower intake v bottom with burst panel installed and has o-ring on the top 671-1471 it is a wet intake nice 350.00
american turbine A-2 alum alloy impeller with a new htp ultimate wear ring std/std new 325.00
auto meter monster tach with recall 11000 rpm nice 100.00
thanks tim
540.871.4833 cell
540.427.2090 home
CMZRACING
10-11-2005, 07:58 AM
One Slightly Used Holley Rubber Vacuum Cap. Make Offer
I Do Need A Float Bowl Screw For A Holley??? Anyone Have An Extra?
jets4me
10-11-2005, 07:16 PM
i have a tunnel ram with 2 6 hundreds on it fuel block with braided line going to the carbs it is chrome put the bottom part of the intank will clean up up but not like the top part. i have a set of gm performance heads close chamber they are steel some of the valves missing. all springs there
jets4me
10-11-2005, 07:22 PM
big block chevy
MANTRA MAN
10-11-2005, 07:28 PM
I have hardin log headers and the polished through transom tips in very nice shape. also red alloyed throttle cable bracket and the quick release peice for a holley carb. :rollside:
PCE081
10-12-2005, 09:20 AM
Set Of Basset Headers. Jet Coated Water Injected.
2 New Sets Of Mufflers
Slacker
10-12-2005, 02:12 PM
I have a used Wieand 5981 tunnel ram with 2 holley 600`s (believe 4150`s need to be rebuilt) with AED rebuild kits and a Mr. Gasket bug catcher scoop. Scoop complete for a single or double carb set up. I can email pics if you want . Would like to sell complete. Thanks, Chris
GasGuzzler
10-12-2005, 03:38 PM
Set Of Basset Headers. Jet Coated Water Injected.
2 New Sets Of Mufflers
Can ya post some pics of those headers?
Jet Novice
10-12-2005, 04:09 PM
I have a set of fresh 14092360 heads and matching Performer 2-0 manifold. Ready to bolt on.
sunkisst
10-12-2005, 05:03 PM
CMZ,I will make you one hell of a deal on the vacuum cap. Swap you 2 bowl screws 4 the cap. email me happyjackvienna@aol w/phone#...also have an idea for Bud Lights during off season.Ever heard of Sullys in Chantilly?
jets4me
10-12-2005, 05:15 PM
jack budlight off season good deal but we are going to lake james you and rich should go so fare me and mopar jet are going but if not when we get back we will hook it up for some budlight see ya
CMZRACING
10-13-2005, 03:28 AM
Yea, Use To Go There On Wenesday's For The Pool League. I Know A Couple Of Regulars Up There At Sully's. So Do You Really Have An Extra Fuel Bowl Screw? Thanks, And Whats Up With The Budlight Off Season?
tahitian dragon
10-13-2005, 08:00 AM
big block chevywhich GEN???
jets4me
10-13-2005, 08:15 AM
that is what the parts i have are for sorry
hydro066
10-13-2005, 01:24 PM
One Slightly Used Holley Rubber Vacuum Cap. Make Offer
I Do Need A Float Bowl Screw For A Holley??? Anyone Have An Extra?
Thought you were kidding about needing a screw....but evidently not. I don't run carbs anymore so I've got a couple of junkers lying around for parts. Give me your address and I'll send you one.
John
pumper-puller
10-13-2005, 01:38 PM
I Will Take Some Bud Light In The Off Season Over At Sullys
sunkisst
10-13-2005, 04:25 PM
I brought both long & short screws home from my shop today.I live right around the corner from Sullys.Email me ,we can meet. Bud Lights to follow!
I hope that rubber cap is 5/16 inch. By the way ,Mike,What engine is in u boat? ...Mopar?
jmm
10-13-2005, 04:43 PM
BBC Forged 427 396 crank. Fresh turn .010 .010 $250
Several sets of oval port heads 781, 290 $100 bare....
One 990 Square port head....Needs repair. Some port work. $100
moparjet
10-14-2005, 05:05 AM
Mike Has The Big Block Chevy.....i Got The Mopar...got Any Parts?
hydro066
10-14-2005, 04:39 PM
Charlie,
The screw is in the mail.
John
Slacker
10-15-2005, 02:22 PM
For a Friend:
Chevy 355 All race motor...13 to 1, Dart 220 aluminum heads,forged pistons,steal crank, balanced and blueprinted..Intake to oil pan 600 HP
Only run to break in $5000 obo
Email for pics at orrinjones@aol.com or call at 804-405-9582
DelawareDave
10-16-2005, 09:39 AM
Guardian 4 point mounts for Olds 455. Jacuzzi YJ pump, complete with electric/hydraulic trim. 75 Sleekcraft 18' hull on trailer.
Any/best offer, lol.
I need 4 trailer tires/wheels. 14 inch. Do not have to be fancy.
Trade for parts?
PM or david@kwiknet.net
MarKist
10-18-2005, 05:14 AM
anybody need a A Stainless Steel impeller???
Markist
MizBubba
10-19-2005, 05:39 AM
anybody need a A Stainless Steel impeller???
Markist
Mark, we need an "a" impeller for the Bubbjet...
MarKist
10-19-2005, 07:51 AM
Ok, Amy just to let you know this is a stainless steel A, witch "I" don't think this is what Alan wants.. there a little pricy $$$ posting it for a friend thx
Markist
MizBubba
10-19-2005, 10:24 AM
Ok, Amy just to let you know this is a stainless steel A, witch "I" don't think this is what Alan wants.. there a little pricy $$$ posting it for a friend thx
Markist
OK, Thanks.
MohaveChuck
10-25-2005, 02:07 PM
I have a complete Mercury Silent choice system for twin engine setup.
A twin stern drive SS tie rod with sperical ends and the Y adapters.
Chuck
182011
10-27-2005, 07:08 AM
I have a brand new msd 6tn for sale still in box