PDA

View Full Version : Say "Why-And"


Kindsvater Flat
10-24-2005, 05:33 PM
Ever see a one piece like this. Neighbor just gave it to me. For a mopar.
http://www.schoutenranch.com/miscboat/motor/intake1.JPG
http://www.schoutenranch.com/miscboat/motor/intake2.JPG
http://www.schoutenranch.com/miscboat/motor/intake4.JPG
http://www.schoutenranch.com/miscboat/motor/intake5.JPG
LakesOnly
10-24-2005, 05:44 PM
Unbelievable vintage piece! :supp: "Say WHY-AND."
Half of me thinks the Mopar nuts might pay handsomely for that on Ebay.
The other half wants to tell you to mill that cab pad off and machine the plenum top to accomodate a 3x2 setup (Mopar indeed). :D
LO
steelcomp
10-24-2005, 06:54 PM
You sure someone didn't make that in their garage???
sanger rat
10-24-2005, 07:43 PM
That would make a cool looking EFI intake. :wink:
Kindsvater Flat
10-25-2005, 09:25 PM
Ok I found out this intake is for a 331 hemi. :notam:
lucky
10-26-2005, 05:38 AM
Build A Cusion For The Top , A Base For The Bottom , Polish The Hell Out Of It - And Call It A Foot Stool For Those Saturday Afternoons Of River Rat 1and 2
steelcomp
10-26-2005, 06:05 AM
Ok I found out this intake is for a 331 hemi. :notam:Those don't look like Hemi ports to me.
Now I KNOW someone made that. It's a TR top welded to a dual quad bottom.
YeLLowBoaT
10-26-2005, 06:22 AM
thats um diffrent. ebay it for gas moeny.....
Kindsvater Flat
10-26-2005, 06:27 AM
Those don't look like Hemi ports to me.
Now I KNOW someone made that. It's a TR top welded to a dual quad bottom.
Maybe?
http://www.schoutenranch.com/miscboat/motor/intake6.JPG
Itsahobby
10-29-2005, 03:08 PM
I bet steelcomp and make a nice piston holder out of it. That would be cool all polished up.
steelcomp
10-29-2005, 05:51 PM
LOL!! That's a good one...I think. :confused: Not exactly sure what you meant. :D
steelcomp
10-29-2005, 05:53 PM
Maybe?
http://www.schoutenranch.com/miscboat/motor/intake6.JPG
Suspicions confirmed. :notam:
Itsahobby
10-31-2005, 06:42 PM
Just my attempt at humor and:
Just thinking of the nice wood one you have and what this "thing" would be good for. :shift: My second choice would be to recycle. How much are they getting now a days?
Hobby
LOL!! That's a good one...I think. :confused: Not exactly sure what you meant. :D
CircleJerk
11-01-2005, 11:35 PM
Nice vintage piece, maybe 318 style? That set up works well on a sbc jet sprint boat cause I saw it whip up on the BBCs in class. the boat was real bad looking with shark teeth painted on the bow but no one made fun of him after his first run! Yes, Idaho license. :D
Hemicbx
11-02-2005, 05:26 PM
I'm pretty sure its for a MoPar B-block (361,383,400) or RB (413,426W, 440). Can't tell for sure w/o dimensions.
Here's why:
Heat crossover in the center.
No water in the intake.
Mopar small blocks & early (50's) Hemi's all had coolant in the intake.
steelcomp
11-02-2005, 05:43 PM
Nice vintage piece, maybe 318 style? That set up works well on a sbc jet sprint boat cause I saw it whip up on the BBCs in class. the boat was real bad looking with shark teeth painted on the bow but no one made fun of him after his first run! Yes, Idaho license. :D
What you saw on a SBC must have been a single four tunnel ram, which, typically dosen't work worth a damn. I'm still guessing that this is the only one of it's kind, and was a single four tunnel ram top welded to a dual quad bottom, made by some guy in his garage. From what I know about intakes, which isn't a lot, I would expect there to be serious fuel distribution problems with this deal.
I'm thinking it would make a better piston rack, than intake :D
steelcomp
11-02-2005, 05:45 PM
I'm pretty sure its for a MoPar B-block (361,383,400) or RB (413,426W, 440). Can't tell for sure w/o dimensions.
Here's why:
Heat crossover in the center.
No water in the intake.
Mopar small blocks & early (50's) Hemi's all had coolant in the intake.
Sounds like you know your Mopars. :D
Kindsvater Flat
11-02-2005, 06:06 PM
I'm pretty sure its for a MoPar B-block (361,383,400) or RB (413,426W, 440). Can't tell for sure w/o dimensions.
Here's why:
Heat crossover in the center.
No water in the intake.
Mopar small blocks & early (50's) Hemi's all had coolant in the intake.
FYI it will fit inside the lifter valley on a "B" motor. Its not mopar.
steelcomp
11-02-2005, 06:18 PM
Ever see a one piece like this. Neighbor just gave it to me. For a mopar. :idea: :confused:
Kindsvater Flat
11-02-2005, 08:20 PM
:idea: :confused:
Thats what he said.. Never paid much attention until trying to figure it out. Its sitting in the scrap box now.
steelcomp
11-02-2005, 08:22 PM
AAwwww, c'monm man, we can make something cool out of it! :D :idea:
GofastRacer
11-02-2005, 08:39 PM
AAwwww, c'monm man, we can make something cool out of it! :D :idea:
Yeah after you melt it down!.. :D :D