steelcomp
11-13-2005, 06:20 PM
OK...so here's the deal. I've been accumulating the parts for a hard running n/a 496 for a while now. When I decided to go blown alky, the 496 didn't pan out to be the best combo, so I'm throwing it out there to see who might be interested.
There's three options here, and I'm not interested in parting this out at this time, so don't ask about individual components.
Option 1.
Short block assembly, un-assembled. These are all new parts except block.
GM four bolt Mk IV block, standard bore, needs boring, no damage. De burred and race prepped.
Eagle 4340 4.25 forged crank.
Brooks65 6.385" aluminum rods
JE/SRP 13: pistons w/pins
Clevite race series bearings...std-std.
$2500.00
Option2
Assembled short block.
This includes balancing, any clearancing needed for rods, bluprinting the block, gas porting pistons, ARP studs, and Total seal low tension rings. Less pan and pump.
$4400.00
Option 3
Complete long block, less pan and pump.
All the above, plus:
Cam...custom roller grind, depending on your app.
Comp Cams roller lifters. Can upgrade for add'l cost.
Isky Roller Rockers
Roll Master timing set.
Cast alum. timing cover.
Brodix BB2X Rehr Morrison heads, (used) fully ported, and inspected and freshened by Alan Johnson. Will have flow numbers for cam choice. These heads are in excellent condition with Manley severe duty valves, K Motion roller springs, and Ti retainers. Low time, seats are in new condition, and heads were well maintained, never damaged.
Manley Pro series pushrods...came with heads.
ARP head studs
Cometic head gaskets
Dart TR, port matched to Brodix heads w/ Dominator top
Stefs aluminum pan and pick-up, custom built for the application.
Melling race series oil pump. blue printed.
This would be a fully prepped competition motor with 13+:1 compression, making in the area of 900 hp, depending on cam choice and use. No BS, nothing fancy. Built to your specific application. Everything I did on my 467, would be repeated here.
$9900.00
At this point nothing is assembled. The heads are at Johnson's right now.
If anyone is remotely interested in any of these options, let me know. It could be done by next race season, but time's a tickin.
There's three options here, and I'm not interested in parting this out at this time, so don't ask about individual components.
Option 1.
Short block assembly, un-assembled. These are all new parts except block.
GM four bolt Mk IV block, standard bore, needs boring, no damage. De burred and race prepped.
Eagle 4340 4.25 forged crank.
Brooks65 6.385" aluminum rods
JE/SRP 13: pistons w/pins
Clevite race series bearings...std-std.
$2500.00
Option2
Assembled short block.
This includes balancing, any clearancing needed for rods, bluprinting the block, gas porting pistons, ARP studs, and Total seal low tension rings. Less pan and pump.
$4400.00
Option 3
Complete long block, less pan and pump.
All the above, plus:
Cam...custom roller grind, depending on your app.
Comp Cams roller lifters. Can upgrade for add'l cost.
Isky Roller Rockers
Roll Master timing set.
Cast alum. timing cover.
Brodix BB2X Rehr Morrison heads, (used) fully ported, and inspected and freshened by Alan Johnson. Will have flow numbers for cam choice. These heads are in excellent condition with Manley severe duty valves, K Motion roller springs, and Ti retainers. Low time, seats are in new condition, and heads were well maintained, never damaged.
Manley Pro series pushrods...came with heads.
ARP head studs
Cometic head gaskets
Dart TR, port matched to Brodix heads w/ Dominator top
Stefs aluminum pan and pick-up, custom built for the application.
Melling race series oil pump. blue printed.
This would be a fully prepped competition motor with 13+:1 compression, making in the area of 900 hp, depending on cam choice and use. No BS, nothing fancy. Built to your specific application. Everything I did on my 467, would be repeated here.
$9900.00
At this point nothing is assembled. The heads are at Johnson's right now.
If anyone is remotely interested in any of these options, let me know. It could be done by next race season, but time's a tickin.