PDA

View Full Version : Scarab Fast...


Whitey
02-25-2003, 08:38 PM
A while back we were discussing oil coolers for 6.2 engines, Did you find anymore info. Thanks Dwight
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:33 AM
Dwight,
Scarab Fast
03-05-2003, 04:48 AM
Do not have no idea what happened there. I am sorry I forgot all about the oil cooler. I will look it up today and let you know tonight. I will go ahead and let you know what I do know off the top of my head. They make power steering coolers, oil coolers, and power steering and oil coolers in one. Most v6 and v8 motors come with a powering steering cooler from the factory and big blocks come with a powerstering/oil cooler in one from the factory. My scarab (350 mag.) just had a powering steering cooler on it. Just last week I ordered a new cooler, I got a powersteering and oil cooler in one. I got a cooler that was made for a big block, 454-502. I did this because it was longer than the one listed for a 350. I will have the oil lines made up to go from my oil filter relocater bracket to the cooler and then up to the oil filter, my return line will stay the same from the filter back to the relocater bracket. I will look this up and let you know wht the price on one is and get back with you. Paul
Whitey
03-05-2003, 02:33 PM
Thanks, Dwight
Scarab Fast
03-12-2003, 04:35 AM
Dwight, sorry for the delay again. Had to leave town in a hurry. I looked the coolers up and they do not have one just for your motor. You could go with one for a 350 or a 454. The only difference is that the 454 is longer, about 16" total length I think. Both coolers are about the same price $180. You would also have to have a filter relocater bracket and have some oil lines made up. My boat already had the filter relocater on it just going to have to make up some oil lines now. The way it works is that you have a bracket mounted where your filter orig. mounted to the block, 2 oil lines coming from it to another bracket usually mounted to the port exhaust manifold riser wher your filter will now be mounted. With the oil cooler you just put it in the loop. The coolers I looked at is oil and powering steering coolers in one. Let me know if I can help you out any
Paul
Whitey
03-12-2003, 07:25 PM
Thanks for the help. I have twins and one engine has the cooler already for power steering. As I remember the other cooler is just setting on the back of the engine.. Do you think that I could use the one cooler that is not being used for power steering, be used for one of my oil coolers? Then I would only need to buy one. Dwight