cyclone
11-22-2005, 09:32 AM
Spam-580-inch blown Chevy engine for sale
I'm selling my engine. Spread the word.
580 cid Blown BBC
Merlin III tall deck race block w/ splayed billet main caps
4.53 bore / 4.50 stroke
Lunati Pro Billet crank
JE dished forged blower pistons
Total Seal rings
Lunati Pro Billet rods- bronze bushed, full floating pins
King bearings
ARP bolts
AFR 315 CNC ported aluminum cylinder heads
Titanium tulip valves and springs
Comp Cams custom grind mechanical roller camshaft .680/.687 260/268 @.050
Comp Endure X roller lifters
Manton pushrods
Comp Roller rockers
AFR aluminum stud girdles
Weiand 8-71 polished supercharger-polished intake manifold w/tented floor, kevlar drive belt
Superchiller polished innercooler
Holley 1000 cfm HP-series carburetors
Stainless steel fuel hard lines
Shotgun Bill chrome scoop with custom fabricated aluminum scoop tray
GM Performance Parts aluminum valve covers powdercoated blue
Aluminum puke tank oil return system included
8.8:1 static compression-will run on 91 octane gas @7 psi boost
Nothing but the best parts here. Motor just broken-in and has only 6 passes at the track on it. Dynod at 1,000 hp @ 6,400 rpm / 899 ft/lbs torque @ 4,600 rpm on pump gas.
No gimmicks, no disappointments. Motor fires right up and runs hard. It's still in my boat so you can hear it run.
I'm working on a new project for next year and this one is ready to go.
$15,000
pm me for more info.
http://www.***boat.com/image_center/data/520/45IMG_4856.JPG
I'm selling my engine. Spread the word.
580 cid Blown BBC
Merlin III tall deck race block w/ splayed billet main caps
4.53 bore / 4.50 stroke
Lunati Pro Billet crank
JE dished forged blower pistons
Total Seal rings
Lunati Pro Billet rods- bronze bushed, full floating pins
King bearings
ARP bolts
AFR 315 CNC ported aluminum cylinder heads
Titanium tulip valves and springs
Comp Cams custom grind mechanical roller camshaft .680/.687 260/268 @.050
Comp Endure X roller lifters
Manton pushrods
Comp Roller rockers
AFR aluminum stud girdles
Weiand 8-71 polished supercharger-polished intake manifold w/tented floor, kevlar drive belt
Superchiller polished innercooler
Holley 1000 cfm HP-series carburetors
Stainless steel fuel hard lines
Shotgun Bill chrome scoop with custom fabricated aluminum scoop tray
GM Performance Parts aluminum valve covers powdercoated blue
Aluminum puke tank oil return system included
8.8:1 static compression-will run on 91 octane gas @7 psi boost
Nothing but the best parts here. Motor just broken-in and has only 6 passes at the track on it. Dynod at 1,000 hp @ 6,400 rpm / 899 ft/lbs torque @ 4,600 rpm on pump gas.
No gimmicks, no disappointments. Motor fires right up and runs hard. It's still in my boat so you can hear it run.
I'm working on a new project for next year and this one is ready to go.
$15,000
pm me for more info.
http://www.***boat.com/image_center/data/520/45IMG_4856.JPG