View Full Version : Blower Coupler - PSI & BDS
Willis
11-29-2005, 08:18 PM
Hello everyone,
:argue:
Need some help.
Take a look at these two blower drive couplers for comparison.
The coupler on the Northside is a competition version used by Mooneyham and BDS with a shaft thickness of 1 ¼ diameter.
http://img.villagephotos.com/p/2002-10/61269/PSICoupler.gif
The coupler on the Southside is PSI and will fit 206 B and D series screw blowers.
My concern is the psi version the “heavy duty” one.
Can anybody shed some light on the PSI couplers available?
Is this one I have the strongest version?
Willis
BUSBY
11-29-2005, 08:34 PM
Wills ... get the PSI snout ... it's the best way to go ...
http://www.***boat.com/image_center/data/520/2358psidrive.jpg
http://www.***boat.com/image_center/data/520/2358psidrive2.jpg
BUSBY
11-29-2005, 08:37 PM
nevermind ... you have the drive coupler to use a regular roots snout?
Fiat48
11-29-2005, 08:38 PM
Wow! Can you say overdrive!
Willis
11-29-2005, 08:39 PM
Brian,
The coupler is a lot thinner than comp version BDS
The shaft is one inch in dia
Willis
BUSBY
11-29-2005, 08:40 PM
a little bit ... huh?
blown428fe
11-29-2005, 08:41 PM
Wow! Can you say overdrive!
YEAH, NO CHIT.
BUSBY
11-29-2005, 08:43 PM
Brian,
The coupler is a lot thinner than comp version BDS
The shaft is one inch in dia
Willis
Right ... the PSI drive is 1" solid I believe ... but with their complete snout, you won't need a coupler ... it should bolt direct ... here's Ron's as well ...
http://www.***boat.com/image_center/data/520/2358IMG_0059.JPG
BUSBY
11-29-2005, 08:48 PM
good overdrive, right? :D
http://www.***boat.com/image_center/data/520/2358psidrive2.jpg
Fiat48
11-29-2005, 08:51 PM
My calculator freaked. Said something like 75%.
BUSBY
11-29-2005, 08:58 PM
My calculator freaked. Said something like 75%.
I think it's 81% ... a 58 bottom and 32 top?
BUSBY
11-29-2005, 08:59 PM
That's Mark Santar's TAH ...
Fiat48
11-29-2005, 09:01 PM
Yep..81. I had figured a 56 on bottom.
ya know...they make a larger bottom if he wants to step it up. :skull:
Prolly hit the pump extention. LOL.
BUSBY
11-29-2005, 09:05 PM
We run 58/30 on the blown gas dealio ... 93%! PSI's run higher ratios ... gotta have that 40 lbs of boost! :D
BUSBY
11-29-2005, 09:06 PM
Prolly hit the pump extention. LOL.
You have to machine off the bottom 1/3 of the extension! just enough to not go through ... take out as much material as you can!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.