Summit Oil Pan???

[Mach 1 2350]

I need to put a new oil pan on my 1988 454 mag. The stock replacement ones are $300 which i feel is a little steep, and i saw two in summit that i was thinking may work. One was the Summit Steel Pan which is the cheapest and the other was the Hamburger Econo. Both are baffled, although the Hamburger is listed as a marine pan. I was wondering iff all baffles were created equal or does it have to be a "marine" design baffle. Thanks for any help

[NOTALENT]

how many quarts were they??? Unfourtanatley the Marine pans are a little steep, but definatley are what you should go with. There are many storys of peeps and stock pans. Have you checked Dooley @ rex marine??

[Mach 1 2350]

The hamburger is an 8 qt/wet/rear sump while the summit was a 4 qt. I was porbably gonna get the 8 qt but was looking to save a little $$. But a blown motor prob aint worth the $150.

[riverbound]

The hamburger is an 8 qt/wet/rear sump while the summit was a 4 qt. I was porbably gonna get the 8 qt but was looking to save a little $$. But a blown motor prob aint worth the $150.
I would use the Higher capacity pan.....better safe than sorry. I have a 10qt. pan on my Jet. with Dual remote filters.

[NOTALENT]

The hamburger is an 8 qt/wet/rear sump while the summit was a 4 qt. I was porbably gonna get the 8 qt but was looking to save a little $$. But a blown motor prob aint worth the $150.
Yup...RB is right...definatley dont want the 4qt...I would actually even go 10qt. Talk to REXONE he's the man at rex marine...pm him for all info... with that 4qt youll seize the motor..

[GUGS102]

I went with the hamburger 9+1 QT pan. works great. only issue I had was that it does not taper around the rear main. I was installing in a jet and had to clearance a few of the bolts on the jet intake. That pan has a built in scraper and baffles. I am happy with the performance and quality, just my experence. I think I gave $200 to summit for it??
oh yeah 489 BBC solid roller etc. etc.
Gugs

[cstraub]

You can find used Merc take offs on the boards for $100. If your on a budget I would go this route.