reverse spam--BBC parts wanted

[Jim W]

Hello everyone,
Last spring I bought a Hallett flatty with a freshly rebuilt 396 BBC. The engine still has the original dist. weiand tunnel ram, 660 Holleys and hyd. cam, boat runs on pump gas.
I need
1--solid lifter cam and lifters. A matching set of springs would be nice.
2-- a oval port intake. Something like a Edelbrock Performer RPM air gap or Victor JR.
3--Holley or BG 750 or so CFM carb.
Before I go to E-Bay or whatever I thought I would shake the Hot Boat bushes for used parts and see what comes out???
Thanks in advance, Jim

[GUGS102]

I've got a 750 vacc secondary carb. $150 list number is 3310. great shape ran within the last month or so. Too big for my small block on the car.
Gugs
http://www.***boat.com/image_center/data/500/2928PB090549.JPG

[EXTREMEBOATS]

I have a Edelbrock Torker oval port. Just needs a cleaning and go.$75 plus shiping.
Mike

[Jim W]

Thanks guys for the replys. I have some feelers out and about in my area. Waiting to see whats around here. Also, a couple of interesting things on E-Bay I am watching.
I also need some roller rockers. 1.7 or better ratio. Anyone have some???
Be good, Jim

[hpy540]

I have a set of roller rockers 1.7. mark_lmk@yahoo.com

[Jeanyus]

I have a Crower solid lifter cam, part # 01355, I used it 1 summer, I also have the valve springs, I will take them off, or sell them with the oval port heads. I can't find the lifters. I was going to put in another motor, but the machine shop said one lobe showed signs of wear, I think they wanted to sell me a new cam.
Cam and springs $35.00 plus shipping.
Heads ?
http://www.hotboatpics.com/pics/data/500/5859crower.jpg
here is the cam specs. http://www.crower.com/misc/cam_spec/cam_finder.php?part_num=01355&x=26&y=6
Ill put up a picture of the cam if you want to see it

[182011]

I have 8 1.8&8 1.7 crane gold rockers for sale 80.00.